Thank you for purchasing this SHARP product. To obtain the best performance from this product, please manual carefully. It will guide you in operating your SHARP read this product. CD-ES900 Mini Component System and CP-ES9O0 (speaker system). consisting of CD-ES900 (main unit) CD-ES99 Mini Component System and CP-ES99 (speaker system). consisting of CD-ES99 (main unit) CD-R/RW_ Playable _ 5CD .......
SPECIAL NOTES NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORTANT SAFETY INSTRUCTIONS 1 Read Instructions - AH the safety and operating instructions should be read before the product is operated. 2 Retain Instructions - The safety and operating instructions retained for future reference should be 3 Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4 Follow Instructions followed. - All operating and use instructions should be 5 Cleaning - Unplug this product from the wall outlet before cleaning.
IMPORTANT SAFETY INSTRUCTIONS (continued) 1 S Outdoor Antenna Grounding - if an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges end built-up static charges.
Contents co-aess0 CD-ES99 Page • ENERGY STAR@ Program Information As an ENERGY General Information Precautions ......................................... Controls and indicators .............................. 6 7 -9 STAR@ Partner, SHARP has determined that this product meets the ENERGY STAR@ guidelines for energy efficiency. ENERGY STAR@ is a U.S. registered mark. • Preparation for Use System connections .............................. Remote control .....................................
oo_Es,oo Precautions CD-ES99 • General • • Please ensure that the equipment is positioned in a well-ventilated area and ensure that there is at least 4" (t0 cm) of free space along the sides, top and back of the equipment. 4" (10 10 cm) Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can damage internal wires. • Do not remove the outer cover, as this may result in electric shock, Refer internal service to your local SHARP service facility.
Controls and indicators CD-ES99 • 13 14 1_ Front panel Reference page Disc Trays ....................................... 16 Timer Indicator ................................... 28 Power On/Stand-by Button ......................... 14 CD Track Up or Fast Forward, Tape 2 Fast Forward, Tuner Preset Up, Time Up Button ........... 15, 17, 22, 24 5. Clock/Timer Button ......................... 15, 27, 30 1. 2. 3. 4. 6. Tuning Up Button ................................. 7. Tuning Down Button .................
CD-ESgO0 oo-_s_ Controls 1 2345 and indicators 6 (continued) • 7 Display Reference page 18 16 17 20 19 16 14 23 21 28 21 25 30 28 28 Reference page 12 12 11 11 11 31 1! 1. Disc Number Indicators ............................ 2.CD Play Indicator ................................. 3.CD Pause Indicator ................................ 4. Memory Indicator ................................. 5.CD Repeat Play Indicator ........................... 6.CD Indicator ..................................... 7.
CD-ESg00 CD-ES99 • 13 14 4 5 6 7 8 9 10 11 12 15 16 _17 18 19 20 21 Remote control Reference Remote Control Transmitter ........................ Disc Number Select Buttons ........................ Disc Direct Search Buttons ......................... CD Clear/Dimmer Button ........................ MemorylSet Button ................... 15, 20, 22, CD Track Down or Fast Reverse, Tape 2 Rewind, Tuner Preset Down, Time Down Button ...... 15, 17, 7. CD Pause Button ................................. 8.
oo__°°-_°° System connections I Make sure to unplug the AC power cord before [] Antenna AM loop antenna Right any connections.
CD-ESg00 CD-ES99 • Antenna connection Supplied FM antenna: Connect the FM antenna wire to the FM 75 OHMS position the FM antenna wire in the direction where signal can be received. terminal and the strongest • Speaker connection Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal. Supplied AM loop antenna: Connect the AM loop antenna to the AM LOOP jack. Position the AM loop antenna for optimum reception. Place the AM loop antenna on a shelf, etc.
CD-ESg00 oo-Es_9System • connections (continued) • AC power connection After checking all the connections have been made correctly, plug the AC power cord of this unit into the AC outlet. If you plug in the unit first, the unit will enter the demonstration mode. Demonstration mode The first time the unit is plugged in, the unit wil! enter the demonstration mode. You will see words scroll.
Remote control • Battery oo_ s oo CD-ES99 installation Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar). Batter es are not nc uded. 1 2 3 Remove the battery cover. Insert the batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them toward the battery terminals. Replace the cover. Notes concerning use: • Reptace the batteries if the operating distance is reduced or if the operation becomes erratic.
oo_ s oo General CD-ES99 control • Volume control Main unit operation: When the VOLUME control is turned When it is turned counterclockwise, clockwise, the volume will il the volume wilt decrease. Remote control operation: Press the VOLUME crease or decrease • CLEAR /DIMMER i_ _, _ ON/ STAND=BY EQUALIZER MODE CD ---" • After use: Press the ON/STAND-BY mode.
Setting the clock oo-EsgO 5 Press the P4_ ,,_ or _'_ _ press the MEMORY/SET button to adjust button. the hour and then Press the t_ _ or I_- _ button once to advance hour. Hold it down to advance continuously. 6 Press the I_1 _ or _- I_,l button to adjust then press the MEMORY/SET button. L In this example, the clock is set for the 12-hour (AM I2:00) Press the ON/STAND-BY button to turn 2 Press the CLOCK/TIMER button.
° Listening to a CD (CDs) This system can also play audio CD-R and CD-RW discs, but cannot record. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the device that was used for recording. • CD playback 1 Press the ON/STAND-BY 2 Press the CD button. button 3 Press the © I button and within 5 seconds, OPEN/CLOSE button to open the disc tray 1.
CD-ESg00 CD-ES99 • • • Playback wil! begin from track I on the DiSC 1. After that disc finishes playing, the next disc will automatically play. After the last track on the fifth disc is played, the CD player stops automatically. When there is no CD in one of the disc trays (1 - 5), the empty tray will be skipped to the next tray with a CD.
CD-ESgO0 co-Es_9 Advanced • CD playback • To specify a disc to play You can play a disc by specifyh_g the disc number. Press one of the o I - C 5 buttons to select Direct track search By using the direct search disc can be played. the desired buttons, the desired disc. Use the direct search buttons on the remote control to select the desiredlectedtrackdisc, while playing the se- '_' _@,_c Selected Selected 2 Within 5 seconds, main unit.
CD-ESg00 CD-ES99 • Repeat • play Repeat play can play all 5 discs, all tracks on a chosen programmed sequence continuously. To repeat all tracks desired play" section LJ -q LI 5 seconds, tw ce. on the remote control. I _f To cancel random play: Press the I_ / _ button. "R" wil! go out. play all tracks on the chosen disc: 1 Press one of the © I - © 5 buttons. 2 Within on the chosen 3 disc: press the DIRECT To cancel repeat play: Press the DIRECT PLAY button "_ -" wil! go out.
CD-ESg00 oo-Es_9Advanced • CD Playback Programmed play You can choose like. up to 32 selections While in the stop MEMORY/SET to enter the mode. mode, for playback in the order you (MEMORY) programming button save to_ O/MEMORY ,f- , "Y, J-- I r- %_ Press one of the © t - © 5 buttons to select the desired disc. _ " Selected Press the direct search buttons the remote control to select on the desired track.
Listening to the radio oo-Esg0 • Tuning 1 Press the ON/STAND-BY 2 Press the TUNER desired 3 Press the TUNING station. Manual O A (BAND) band (v to turn button the power repeatedly on. to select the (FM or AM). or A) button to tune in to the desired tuning: Press the TUNING button to the desired station.
OO-ES_9OO-ESg00 Listening to the radio • Memorizing a station • You can store 40 AM and FM stations the push of a button. (Preset tuning) Perform 2 Press preset (continued) steps 1 - 3 in "Tuning" in memory on page the MEMORY/SET (MEMORY) tuning saving mode. and recall them at • 21. button to enter the 1 Within select 30 seconds, Store the stations channel I.
Listening to a cassette tape (TAPE 1 or TAPE 2) • • For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not recommended.) • Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. 1 Press the ON/STAND-BY 2 Open the cassette compartment by pushing the area marked "--_". 3 Load • Before loading a tape into the cassette compartment, tighten the slack with a pen or a penci!.
CD-ESgO0 Recording CD-ES99 • Various Function tape functions Main unit Before recording: Remote control Play (23 Stop _ [] (23 Fast forward/Fast rewind _ I\ _ (TAPE 2 only) _ ._ Operation Press in the stop mode. Press in the playback, fast forward or fast rewind mode. Press in the playback or stop mode. v (Z) Caution: • To remove the cassette, press the [] button, and then open the compartment. • Before changing from one tape operation to another, press the [] button.
CD-ESg00 CD-ES99 • © 5 G;;;;;;;_ ©4 (_3_ ©2 Recording the ON/STAND-BY Press the CD button. 3 Load a cassette into the TAPE 2 cassette with the side to be recorded on facing you. 5 6 Press will be paused. Within 5 seconds, recording. on. compartment recording cannot be _,._ i_ _ to select press the DIRECT the desired PLAY button disc. to start • Recording is started from the selected CD.
CO-Es_CO-ES_00 Recording Recording on a cassette from several tape (continued) • CDs continuously: t Perform steps I - 5 in "Recording from a CD (CDs)" 2 Within 5 seconds, press the _ / _. To perform programmed on page 25. Dubbing from tape to tape You can record from 1 Press 2 Load a prerecorded cassette into the TAPE I cassette compartment. Insert a blank tape into the TAPE 2 cassette compartment. the ON/STAND-BY button to turn the power on. recording: I Program discs and tracks.
Timer and sleep operation Timer playback: The unit turns on and plays the desired source (CD, tuner, tape) at the preset time. Timer recording: The unit turns on and starts time. This unit has 2 types Once timer: recording of timer: from the tuner ONCE TIMER at the preset and DAILY TIMER. Once timer play and once timer recording works for one time only at a preset time. For example, if you are away but want to record a program on a radio station.
CD-ESg00 coEs_9 Timer and sleep operation Within t0 seconds, press the I_1__ lect "ONCE SET" or "DAILY SET button. _hll_r r Press the "REC", I_ r _ (continued) or _ button to se- 9 Switch input _fl7 _4 button TI to and press the MEMORY/SET _'_ select r To select T "PLAY" or button. Red <-_ The illustrations Press then --,,,,,,,-, c ,_-- or I_1_i_1_1button press the MEMORY/SET the hour and button. 28 and then source: CD, TUNER, source: TAPE I or TUNER.
CD-ESg00 CD-ES99 12Whenthe preset time is reached, playback or recording will start. The volume will increase gradually until it reaches the preset volume. 13When the timer end time is reached, the system will enter the power stand-by mode automatically. Once timer: The timer will be canceled. Daily timer: The timer will operate at the same time every day. it will continue until the daily timer setting is canceled. Cancel the daily timer when it is not used.
CD-ESg00 oo-Es_9Timer and sleep operation • (continued) Sleep operation The radio, compact disc and cassette tape can al! be turned off automatically. Play back the desired sound 2 Press the CLOCK/TIMER 3 Within 1O seconds, source. the / L Press the _ (Maximum: _ • 3 hours - 5 minutes • 5 minutes Press ton. "SLEEP" the press or _ 3 hours 1 2 button. _ or _ _ button to select "SLEEP", and press the MEMORY/SET button. _ _-_LCCrr Z) button to select -_ 5-minute the time.
Enhancing your system The connection cord is not included. Purchase able cord as shown below. ooEsg00 a commercially avail- • DVD, etc. 1 GAME f or VCR, DVD, etc. Connect a video GAME 2 To the line output Listening to playback sounds of Game, VCR, Connect game (VIDEO, system, AUDIO VCR, the TV input to auxiliary. 3 Press the ON/STAND-BY 4 Press the GAMENIDEO 5 Play the connected DVD, etc. to the front L and R) jacks.
CD-ESg00 Troubleshooting CD-ES99 • Headphones • Before plugging h_or unplugging the headphones, reduce the volume. • Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between I6 ohms and 50 ohms impedance. The recommended impedance is 32 ohms. • Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOLUME control. chart Many potential problems can be resolved by the owner without calling a service technician.
CD-ESg00 CD-ES99 • Cassette • deck Symptom Possible • Cannot record. • Cannot record tracks with proper sound quality, • Cannot • Sound cause Symptom • Is the erase-prevention moved? • Is it a normal tape? (You cannot record on a metal or CrO_ tape.) • Is there • Is the tape stretched? • Are the capstans, Cannot • Sound fluctuation, • Cannot Possible The radio makes unusual noises continuously, hear treble. remove • pinch rollers, or heads dirty? the tape.
Maintenance CD-ESg00 CD-ES99 • • • Condensation Sudden temperature humid environment pickup, tape heads, Condensation can leave the power on playback is possible the transmitter with changes, storage or operation in an extremely may cause condensation inside the cabinet (CD etc.) or on the transmitter on the remote control. cause the unit to malfunction. If this happens, with no disc (or cassette) in the unit until normal (about I hour).
Specifications co-Esg0 As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
