Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. DVD MINI SYSTEM CD-G10000DVD MODEL CD-G10000DVD DVD Mini System consisting of CD-G10000DVD (main unit) and GBOXSA043AWM1 (surround speaker system). CD-G10000DVD CP-G10000 CP-G10000 Speaker System consisting of CP-G10000 (front speaker system) and CPSW10000 (active subwoofer).
ENGLISH CD-G10000DVD CP-G10000 ENGLISH Special notes Accessories WARNINGS Please confirm that the following accessories are included. Important Instruction I When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit. When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. I This unit contains no user serviceable parts. Never remove covers unless qualified to do so.
2 3 4 Contents CD-G10000DVD CP-G10000 H General Information Page Precautions ................................................................................... 3 Controls and indicators ......................................................... 4 - 9 H Preparation for Use System connections ........................................................... 10 - 15 Subwoofer control ...................................................................... 16 Remote control .....................................
CD-G10000DVD CP-G10000 ENGLISH Precautions Warning: H General I Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the equipment. 10 cm (4") 10 cm (4") The voltage used must be the same as that specified on this unit. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage.
Controls and indicators CD-G10000DVD CP-G10000 ENGLISH H Front panel 5 -DISC GHANGER 5. 6. 7. 8. 9. DVD MINI SYSTEM CD-G10000DVD 10. 11. 12. 13. 14. 15. 16. 17. AUTO REVERSE 1 MIC 2 MIC LEVEL MIN D /C DV D 28 29 30 31 MAX 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. Disc Trays ............................................................................................ 22 Timer Set Indicator .............................................................................
CD-G10000DVD CP-G10000 Controls and indicators (continued) ENGLISH H Display General Information 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27.
CD-G10000DVD CP-G10000 ENGLISH H Rear panel 1 6 7 8 9 10 2 3 4 Audio Digital Out Socket .................................................................... 71 S-Video Output Socket ....................................................................... 22 AC Voltage Selector ...................................................................... 13, 14 Cooling Fan AC Power Lead ............................................................................. 13, 14 FM 75 Ohms Aerial Terminal ..............
CD-G10000DVD CP-G10000 Controls and indicators (continued) ENGLISH H Front Speaker 1. 2. 3. 4. 1 3 General Information 2 Woofers Tweeter Bass Reflex Duct Speaker Terminals 4 H Surround Speaker 1. Full-range Speakers 2. Speaker Terminals 1 2 3 4 H Active Subwoofer 5 6 Reference page 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 2 1 8 9 7 Bass Reflex Duct Subwoofer Power Indicator ................................................................................... 14 Power Switch .........................
CD-G10000DVD CP-G10000 ENGLISH H Remote control 1 20 2 21 3 22 23 24 4 5 6 25 7 8 9 10 26 27 28 11 12 13 14 13. 14. 15. 16. 17. 29 30 31 32 33 34 35 36 15 16 17 18 GAME /VIDEO RRMCGA015AWSA 19 *CD-G10000DVD(EN)06-09 37 38 39 40 8 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. Remote Control Transmitter ................................................................ 17 Disc Number Select Buttons ............................................
CD-G10000DVD CP-G10000 Controls and indicators (continued) ENGLISH H Remote control with shift button Reference page General Information 1 1. 2. 3. 4. 5. 6. Karaoke/Audio Mode Button ....................................................... 54, 55 DVD Setup Button ......................................................................... 24, 28 DVD Sound Button ............................................................................. 39 DVD Super Picture Button ......................................
System connections CD-G10000DVD CP-G10000 ENGLISH Make sure to unplug the AC power lead before making any connections. Surround speaker (right) FM Aerial AM Loop Aerial Front speaker (left) Surround speaker (left) Preparation for Use Active Subwoofer Front speaker (right) To a wall socket (See page 14) To a wall socket (See page 13) Grey 7 E-10 *CD-G10000DVD(EN)10-17 10 05.1.
CD-G10000DVD CP-G10000 ENGLISH System connections (continued) H Aerial connection H Speaker connection Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM aerial wire in the direction where the strongest signal can be received. Supplied AM loop aerial: Connect the AM loop aerial to the AM LOOP socket. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).
CD-G10000DVD CP-G10000 ENGLISH H Placing the speaker system H TV/monitor connection To enjoy the surround effect, we recommend that you place each speaker as shown to the below. If the TV/monitor has a video input, connect it to the VIDEO OUT socket on the rear of the unit. TV Active subwoofer Main unit Front speaker (right) TV To video input socket Yellow Surround speaker (left) Surround speaker (right) Video cable (Yellow) Yellow Note: The speaker grilles are not removable.
CD-G10000DVD CP-G10000 System connections (continued) ENGLISH Main Unit H Setting the AC voltage selector Check the setting of the AC voltage selector located on the rear panel before plugging the unit into a wall socket. If necessary, adjust the selector to correspond to the AC power voltage used in your area. Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110 V, 127 V, 220 V or 230 V - 240 V AC).
CD-G10000DVD CP-G10000 ENGLISH Active Subwoofer H Setting the AC voltage selector Check the setting of the AC voltage selector located on the rear panel before plugging the unit into a wall socket. If necessary, adjust the selector to correspond to the AC power voltage used in your area. Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110 V, 127 V, 220 V or 230 V - 240 V AC).
CD-G10000DVD CP-G10000 ENGLISH System connections (continued) H Setting the FM/AM span selector H Demonstration mode The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll. Preparation for Use CD-G10000DVD To cancel the demonstration mode: When the unit is in the power stand-by mode (demonstration mode), press the X-BASS/DEMO button. The demonstration mode will be cancelled and the display will disappear.
Subwoofer control CD-G10000DVD CP-G10000 ENGLISH H Power Switch The POWER indicator lights up when you press the POWER switch to : ON. H Volume control Turn the VOLUME control clockwise to increase the volume, and turn it anticlockwise to decrease the volume. Adjusts the high frequency cut-off point. Frequencies higher than the set frequency are removed. To emphasise the bass, turn this control towards 35 Hz and increase the volume.
CD-G10000DVD CP-G10000 ENGLISH Remote control H Battery installation 1 2 3 Open the battery cover. Insert the batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them towards the ë battery terminal. Close the cover. 1 Notes concerning use: I Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
1 General control CD-G10000DVD CP-G10000 ENGLISH Remote control operation: Press the VOLUME (+ or -) button to increase or decrease the volume. 2 0 ..... 30 MAXIMUM 3 H Bass control When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and “X-BASS” will appear. To cancel the extra bass mode, press the X-BASS/DEMO (X-BASS) button.
CD-G10000DVD CP-G10000 Setting the clock ENGLISH 5 Press the 5 3 or 2 4 button to adjust the hour and then press the MEMORY/SET button. 5 -DISC CHANGER Press the 5 3 or 2 4 button once to advance the time by 1 hour. Hold it down to advance continuously. DVD MINI SYSTEM CD-G10000DVD Basic Operation 6 Press the 5 3 or 2 4 button to adjust the minutes and then press the MEMORY/SET button. In this example, the clock is set for the 24-hour (0:00) display.
Types of playable discs CD-G10000DVD CP-G10000 The unit can playback discs bearing any of the following marks: DVD Video DVD-R DVD-RW Audio CD CD-R/CD-RW 4.7 ENGLISH Note 2: The specific playback functionality for some DVD discs is determined by the disc manufacturer. Because this system plays disc data in accordance with the disc manufacturer’s guidelines, some functions may not be available on some discs. Be sure to read the instructions provided with the disc.
CD-G10000DVD CP-G10000 ENGLISH Types of playable discs (continued) H MP3 File Format MP3 file format song data which is compressed in “MPEG 1 audio layer 3” format file. MP3 file is file with [ .mp3 ] extensions. ( If file with [ .mp3 ] extensions but not recorded in MP3 format, only noise could be heard if it is possible to playback). Icons used on DVD discs Sample Icons H WMA File Format WMA is an audio file format developed by Microsoft with [ .wma ] extensions.
Preparing to watch a DVD (DVDs) CD-G10000DVD CP-G10000 ENGLISH To watch DVD video images on the TV: 1 Turn on the TV. 2 Set the TV to “AV”, “VIDEO”, etc. 3 Turn on the unit and start play. See page 33 for playing disc. Note: There is no audio signal supplied to the TV. H Loading a DVD (DVDs) VIDEO IN S-VIDEO INPUT Video cable (Supplied) S-Video cable (commercially available) 1 2 3 Press the ON/STAND-BY button to turn the power on. 4 Place the DVD on the disc tray 1, label side up.
CD-G10000DVD CP-G10000 Initial setup (OSD language setup) ENGLISH DVD Setting When you use the unit for the first time, you should set the language to be used for the OSD (On Screen Display). 1 2 3 Press the ON/STAND-BY button to turn the power on. 4 Use the or button to select the “ OSD LANGUAGE SETUP” and then press the ENTER button. “ OSD LANGUAGE SETUP” screen appears. Press the DVD/CD button.
Setting up for playback of an NTSC disc CD-G10000DVD CP-G10000 Used to specify the colour system in accordance with the TV connected when playing back an NTSC disc. 1 Whilst a disc is stopped, press the SET UP button whilst pressing down the SHIFT button to display the setup screen. 2 3 Use the cursor ▲ or ▼ button to select the “ Press the ENTER button and then use the cursor ▲ or ▼ button to select “NTSC”. ENGLISH TV MODE ”.
CD-G10000DVD CP-G10000 TV mode setup ENGLISH The following describes how to select the DVD playback display format. 1 Whilst a disc is stopped, press the SET UP button whilst pressing down the SHIFT button to display the setup screen. 2 Use the cursor A. Viewing on a wide screen TV screen (16:9): Using a 16:9 wide image Select 16 : 9 for wide DVD video output. or button to select the “ 4:3 LB NTSC NTSC I A wide image size is displayed when playing a wide image disc.
Parental setting ENGLISH Country codes: Certain discs come preset with country codes and parental level settings that are defined for particular countries. Discs equipped with the parental lock function are rated according to their content. The rated content allowed by a parental lock level and the way a DVD can be controlled may vary from disc to disc. Some discs, for example, may let you edit out violent scenes and replace them with scenes more suitable for viewing by children.
CD-G10000DVD CP-G10000 Parental setting (continued) ENGLISH 7 Press the cursor button to select “CODE”, then press ENTER and then use the cursor , , or button to select the desired country code (see page 26). 8 Press the ENTER button to confirm the setting. To exit the setup screen and return to the startup screen, press the SET UP button whilst pressing down the SHIFT button or the RETURN button.
Audio setting CD-G10000DVD CP-G10000 ENGLISH 6 Press the ENTER button to confirm the setting. To exit the setup screen and return to the startup screen, press the SET UP button whilst pressing down the SHIFT button or the RETURN button. H Setting the MPEG Audio Out 1 Whilst a disc is stopped, press the SET UP button whilst pressing down the SHIFT button to display the setup screen. 2 Use the cursor SETUP”. 3 Press the ENTER button and then use the cursor button to select “ DIGITAL”.
CD-G10000DVD CP-G10000 ENGLISH Audio setting (continued) H Setting the cinema voice 1 Whilst a disc is stopped, press the SET UP button whilst pressing down the SHIFT button to display the setup screen. 2 Use the cursor SETUP”. 3 Press the ENTER button and then use the cursor button to select “CINEMA VOICE”. 4 Press the ENTER button to display the settings you can select. or button to select the “ DVD Setting Use the cursor or or button to select “ON” or “OFF”.
Disc language setting (continued) CD-G10000DVD CP-G10000 ENGLISH Use the cursor to select the “ LANGUAGE”. or button DISC 2 DISC LANGUAGE AUDIO ENGLISH SUB TITLE OFF MENU ENGLISH 3 3 6 7 Notes: After selecting the item, press the ENTER button. Select the language you want to use with the cursor , or button. DISC LANGUAGE If you want to use any languages that are not on OSD, proceed to step 1 to the right “Selecting a language from others”.
CD-G10000DVD CP-G10000 Disc language setting (continued) ENGLISH Language code list for disc language DVD Setting Code AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DA DE DZ EL EN EO ES ET EU FA FI FJ FO FR Language name Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali; Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutanese Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Far
Changing the display mode CD-G10000DVD CP-G10000 ENGLISH H To change the display mode H DVD mode operation indicators You can select “auto”, “on”, or “off” as the display mode. The following shows what appears on the display when “auto” or “on” is selected. The following are examples of display indicators that appear during DVD playback.
CD-G10000DVD CP-G10000 Playing a DVD (DVDs) 1 ENGLISH H To play a disc 1 2 2 Press the ON/STAND-BY button to turn the power on. Press the DVD/CD button to display the startup screen shown. 3 4 5 -DISC GHANGER 3 Load the disc(s) you want to play. 5 See page 22 for information about loading discs. DV D MINI SYSTEM DVD Playback CD-G10000DVD 4 Press the 0 button to start playback.
Other disc play features 2 This section explains how to use skip, resume, slow motion, and other playback features. Whilst a disc is playing, press the PRESET W button. 4 PRESET W button skips to the next chapter. I The I The PRESET X button skips to the beginning of the current PRESET X button again to skip to the chapter. Press the beginning of the previous chapter. / or / button on the remote control I You can also press the for the same operation.
CD-G10000DVD CP-G10000 Other disc play features (continued) ENGLISH H Still (Pause) and frame advance 1 5 -DISC Whilst a disc is playing, press the STILL 60 button. DVD I This freezes the image on the screen. I Each press of the STILL 60 button advances the frame in the still mode. GHANGER DV D MINI SYSTEM CD-G10000DVD 2 To cancel still picture and return to normal play, press the 0 button. DVD Notes: I You may not be able to use these functions with some discs.
Using the function control CD-G10000DVD CP-G10000 1 Using function control, you can check at a glance and change the current settings of the following items: subtitle, angle, audio, digital gamma and digital super picture. Function control also allows you three ways of direct skips (title, chapter and time). I Whilst the disc is playing, press the SET UP button whilst pressing down the SHIFT button to display the screen shown below.
CD-G10000DVD CP-G10000 Using the function control (continued) ENGLISH 2 Use the 0 - 9 buttons to select the title number to which you want to skip. 5/ 5 DVD I You can also select the title number by pressing the cursor button. 3 or Press the ENTER button. The image changes to the beginning of the specified title. Notes: Advanced DVD Features I The number of titles you can enter depends on that of the titles recorded on a disc you play.
CD-G10000DVD CP-G10000 Press the DIRECT button three times to select . 2/5 10 / 30 – – : – – :: – – 2 Use the 0 - 9 buttons to enter the time to which you want to skip. 01 : 06 –– DVD DVD I You can also enter the time by pressing the cursor or button. To do so, press the cursor or button to select the place where you want to enter the time. I You can also press the SUB TITLE button on the remote control for the same operation in step 3. (You do not need to do the steps 1 and 2.
CD-G10000DVD CP-G10000 ENGLISH Using the function control (continued) H 3-D Virtual surround setting H Audio setting A number of different methods are used to record audio onto a DVD video disc, including multi-channels (used for voiceovers in other languages), DTS, MPEG audio and Linear PCM. Your system provides a number of different audio modes from which you can choose to suit the type of disc you are playing. 1 Press the SET UP button whilst pressing down the SHIFT button during playback.
Using the function control (continued) CD-G10000DVD CP-G10000 ENGLISH H Digital gamma setting Digital gamma is a digital image quality enhancement function that gives a richer image by brightening the darker and more obscure portions of the image without altering the brightness of the brighter portions, thereby making the entire image easier to see. Use the following procedure to change the setting between “ON” and “OFF”, and the level for the digital gamma setting.
CD-G10000DVD CP-G10000 ENGLISH Using the function control (continued) H Digital super picture setting H To zoom an image Digital super picture is a digital image quality enhancement function that gives a clearer image by sharpening the details and outlines in the image and reducing the amount of picture noise. Use the following procedure to change the setting between “ON” and “OFF”, and the level for the digital super picture setting.
Repeat playback CD-G10000DVD CP-G10000 ENGLISH H Title repeat Example: To repeat the title you are currently viewing Play the title you want to repeat. Press the R button twice to repeat the title. 2/5 8 / 30 T DVD To cancel repeat play, press the R button again. This clears the “ indicator from the display. T ” Note: You may not be able to use this function with some discs.
CD-G10000DVD CP-G10000 Programme playback ENGLISH H Chapter programmed playback You can choose up to 24 favorite chapters for playback in the order you like using this function. (Title cannot be programmed) Advanced DVD Features 1 Whilst a disc is stopped, press the MEMORY/ DIMMER button to display the programme screen. Cursor 2 Use the cursor or button to select the desired title and then press the ENTER button.
Selecting titles from the menu Setting parameters using the disc menu Some DVDs have a title menu that you use to select the title you want to play. Some DVDs include a disc menu that you can use to select subtitle set, audio channel, and DTS or MPEG audio. You can also turn disc menu on and off. CD-G10000DVD CP-G10000 ENGLISH H To turn on subtitling (example) 1 Whilst the disc is stopped, press the MENU button to display the disc menu. 2 Use the cursor , , or item on the disc menu.
CD-G10000DVD CP-G10000 ENGLISH Video CD Preparation for video CD playback Any CD that contains motion pictures can be played. You can enjoy motion pictures with the sound quality of MDs and the picture quality of VHS tapes. Digital compression technology allows the continuous playback of up to 74 minutes from a 12 cm disc. With video CDs, you can select the items you want to watch from the on-screen menu. The disc symbols are found on the disc labels or jackets.
Video CD playback CD-G10000DVD CP-G10000 ENGLISH Playback control: Video CDs that support “Playback control” can display still pictures. This function can be used with video CD software (video CDs with playback control) that have a playback method recorded on them. You can select items you want to watch from the menu displayed on the TV screen, or you can show still pictures. Turn on the TV and set the input selector to “VCR”.
CD-G10000DVD CP-G10000 ENGLISH Video CD playback (continued) To interrupt playback: Caution: Press the 6 /STILL 60 button on the remote control. To resume playback from the same point, press the 0 button. I Do not place two discs in one disc tray. I Do not play discs of special shapes (heart, octagon, etc.). It may cause malfunctions. I Do not push the disc tray whilst it is moving. I Do not turn the disc tray by hand. This may cause malfunctions.
CD playback CD-G10000DVD CP-G10000 This system can also play audio CD-R and CD-RW discs, but cannot record. Some audio CD-R and CD-RW discs may not be playable due to the state of disc or the device that was used for recording. ENGLISH H CD playback 1 2 3 4 Press the ON/STAND-BY button to turn the power on. Press the DVD/CD button. Press the s 1 button and within 5 seconds, press the OPEN/ CLOSE button to open the disc tray 1. Place the CD on the disc tray 1, label side up.
CD-G10000DVD CP-G10000 ENGLISH CD playback (continued) I Playback will begin from track 1 on the DISC 1. After that disc finishes playing, the next disc will automatically play. I After the last track on the fifth disc is played, the CD player stops automatically. I When there is no CD in one of the disc trays (1 - 5), the empty tray will be skipped to the next tray with a CD.
CD-G10000DVD CP-G10000 1 ENGLISH Notes: 3 4 5 Caution: After using repeat or random play, be sure to press the ■ button. Otherwise, the disc(s) will play continuously. 6 H Repeat play CD playback can be repeated according to below sequence. 7 Press the R button repeatedly on the remote control. All disc repeat 8 Normal playback Track repeat Disc repeat RRMCGA015AWSA To cancel repeat play: Press the R button repeatedly to extinguish the “R”.
CD-G10000DVD CP-G10000 ENGLISH CD playback (continued) H Programmed play 4 Video CD/CD Playback By specifying discs from 1 to 5, and tracks from 1 to 99, you can choose up to 32 selections for playback in the order you like. Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be programmed. If you make a mistake, the programmed tracks can be cleared by pressing the cursor to go to confirm condition, then press CLEAR / DISPLAY button.
MP3/WMA disc CD-G10000DVD CP-G10000 MP3 MP3 is a form of compression. It is an acronym which stands for MPEG Audio Layer 3. MP3 is a type of audio code which is processed by significant compression from the original audio source with very little loss in sound quality. H Direct search of the track MP3/WMA By using the direct search buttons, the desired tracks can be played. 1 Whilst in the stop mode, press the s 1 - s 5 buttons and 0 button to select the desired disc.
CD-G10000DVD CP-G10000 ENGLISH MP3/WMA disc (continued) Notes: H To skip during playback 1 During playback, press 5 button to go to previous track, or press 4 button for next track of the same folder. H Speed search during playback Video CD/CD Playback 1 Press 5 or 4 button for more than 1.5 seconds during playback. I Press repeatedly will toggle its different speeds.
Playing karaoke CD-G10000DVD CP-G10000 ENGLISH You can enjoy karaoke to DVDs, video CDs, CDs, MP3 Discs, radio, cassettes, and other external devices by connecting a separately available microphone to this unit. 1 Set the MIC LEVEL control to MIN to protect the speakers from shock noise and to avoid disturbing noises. 2 Connect the microphone(s) to the MIC 1 or MIC 2 socket or both sockets for enjoying duets. D D /C DV I Use a microphone with a 6.3 mm (1/4") plug, an impedance of 600 ohms.
CD-G10000DVD CP-G10000 ENGLISH Playing karaoke (continued) Notes: H To change the audio mode Sound of the playback source can be switched among the STEREO, L-CH, RCH, and V-CANCEL (VOCAL CANCEL) modes. The audio mode function is used when the left and right channels have individual signals from each other. Press the KARAOKE button whilst pressing down the SHIFT button on the remote control until the desired audio mode is displayed.
Listening to the radio CD-G10000DVD CP-G10000 ENGLISH H Tuning 1 2 3 Press the ON/STAND-BY button to turn the power on. Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). Press the TUNING (X or W) button to tune in to the desired station. Manual tuning: 5 -DISC GHANGER Press the TUNING button as many times as required to tune in to the desired station. When the TUNING button is pressed for more than 0.
CD-G10000DVD CP-G10000 ENGLISH Listening to the radio (continued) H Memorising a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) 1 2 Perform steps 1 - 3 in “Tuning” on page 56. 3 Within 30 seconds, press the PRESET (X or W) button to select the preset channel number. Press the MEMORY/SET (MEMORY/DIMMER) button to enter the preset tuning saving mode. H To scan the preset stations The stations saved in memory can be scanned automatically.
Listening to a cassette tape (TAPE 1 or TAPE 2) I For playback, use normal or low-noise tapes for the best sound. (Metal or CrO2 tapes are not recommended.) I Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. I Before loading a tape into the cassette compartment, tighten the slack with a pen or a pencil. ENGLISH H Tape 1 playback 1 2 3 Press the ON/STAND-BY button to turn the power on.
CD-G10000DVD CP-G10000 Listening to a cassette tape (TAPE 1 or TAPE 2) (continued) ENGLISH H Tape 2 playback Tape Playback CD-G10000DVD 1 2 3 Press the ON/STAND-BY button to turn the power on. 4 Load a cassette into the TAPE 2 cassette compartment with side A facing towards you. 5 Press the button to choose one side or both sides. Press the TAPE (1V2) button to select TAPE 2. Open the cassette door by pushing the area marked “7”. … To listen to both sides.
Recording to a cassette tape ENGLISH H Various tape function Main unit Remote control Side A playback Side B playback Before recording: Operation I When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. Press in the stop mode. I SHARP is not liable for damage or loss of your recording arising from malfunction of this unit.
CD-G10000DVD CP-G10000 Recording to a cassette tape (continued) ENGLISH H Recording from a DVD (DVDs) 1 2 Press the ON/STAND-BY button to turn the power on. Load a cassette into the TAPE 2 cassette compartment with the side A facing you. Wind past the leader of the tape, on which recording cannot be performed. 5 -DISC CHANGER DVD MINI SYSTEM Tape Recording CD-G10000DVD 3 4 5 Press the DVD/CD button and load the desired disc. Press one of the s 1 - s 5 buttons to select the disc to be recorded.
Recording to a cassette tape (continued) CD-G10000DVD CP-G10000 H Recording from MP3/WMA disc ENGLISH You can record 5 CDs continuously. 1 2 Press the ON/STAND-BY button to turn the power on. Load a cassette into the TAPE 2 cassette compartment with the side A facing you. Wind past the leader of the tape, on which recording cannot be performed. CHANGER DVD MINI SYSTEM 3 4 CD-G10000DVD 5 Press the DVD/CD button and load the desired disc.
CD-G10000DVD CP-G10000 Recording to a cassette tape (continued) ENGLISH H Recording from a CD (CDs) You can record the desired CD using the DIRECT PLAY button. 1 2 3 Press the ON/STAND-BY button to turn the power on. Press the DVD/CD button. Load a cassette into the TAPE 2 cassette compartment with the side A facing you. Wind past the leader of the tape, on which recording cannot be performed. 5 -DISC CHANGER 4 Press the button to choose one side or both sides.
Recording to a cassette tape (continued) 1. Perform steps 1 - 6 in “Recording from a CD (CDs)” on page 63. 2. Within 5 seconds, press the 0 button to record on side A, or the 1 button for side B. To perform programmed recording: 1. Programme discs and tracks. (See page 51.) 2. Press the I6 button. 3. Press the 0 button to record on side A, or the 1 button for side B. H Recording from the radio 1 2 3 Load a cassette into the TAPE 2 cassette compartment with side A facing you.
CD-G10000DVD CP-G10000 Recording to a cassette tape (continued) ENGLISH H 1 Dubbing from tape to tape 2 You can record from TAPE 1 to TAPE 2. 1 2 Press the ON/STAND-BY button to turn the power on. 3 Load a prerecorded cassette into the TAPE 1 cassette compartment. Insert a blank tape into the TAPE 2 cassette compartment. 4 It is recommended that the recording tape is the same length as the master tape. Tape Recording 3 Press the TAPE (1 V 2) button until “TAPE 1” appears on the display.
1 Timer and sleep operation CD-G10000DVD CP-G10000 ENGLISH Timer playback: 2 3 The unit turns on and plays the desired source (DVD, CD, Video CD, MP3 disc, tuner, tape) at the preset time. Timer recording: 5 -DISC GHANGER The unit turns on and starts recording from the tuner at the preset time. DV D MINI SYSTEM CD-G10000DVD 4 This unit has 2 types of timer: ONCE TIMER and DAILY TIMER. time only at a preset time. For example, if you are away but want to record a programme on a radio station.
CD-G10000DVD CP-G10000 Timer and sleep operation (continued) ENGLISH 4 Within 10 seconds, press the 5 3 or 2 4 button to select “ONCE SET” or “DAILY SET”, and press the MEMORY/ SET button. 8 9 Set the time to finish as in steps 6 and 7 above. Switch input with the 5 3 or 2 4 button, and then press the MEMORY/SET button. To select the timer playback source: DVD/CD, TUNER, TAPE 1 or TAPE 2. To select the timer recording source: TUNER.
Timer and sleep operation (continued) start. In the timer playback mode, the volume will increase gradually until it reaches the volume you were listening to before your system entered the timer stand-by mode. 13 When the timer end time is reached, the system will enter the power stand-by mode automatically. Once timer: The timer will be cancelled. Daily timer: The timer will operate at the same time every day. It will continue until the daily timer setting is cancelled.
CD-G10000DVD CP-G10000 ENGLISH Timer and sleep operation (continued) H Sleep operation The radio, compact disc and cassette tape can all be turned off automatically. 1 2 3 Advanced Features 4 Play back the desired sound source. Press the CLOCK/TIMER button. Within 10 seconds, press the 5 3 or 2 4 button to select “SLEEP”, and press the MEMORY/SET button. Press the 5 3 or 2 4 button to select the time.
Enhancing your system CD-G10000DVD CP-G10000 The connection lead is not included. Purchase a commercially available lead as shown below. GAME or VCR, DVD, etc. H Listening to the playback sounds of Game, VCR, ENGLISH DVD, etc. 1. Connect a video game system, VCR, DVD, etc. to the front GAME INPUT (VIDEO, AUDIO L and R) sockets. 2. Connect a TV to the rear VIDEO OUT socket. Switch the TV input to auxiliary.
CD-G10000DVD CP-G10000 ENGLISH Enhancing your system (continued) H Leads required to connect external units When external units are connected, you need commercially available leads. TV Advanced Features Optical digital lead (not supplied) MD recorder, DTS/MPEG audio processor or amplifier To the digital input socket To video input socket Yellow Yellow Video Cable E-71 *CD-G10000DVD(EN)66-71 71 05.1.
Troubleshooting chart H General Symptom Possible cause ● The clock is not accurate. ● Did a power failure occur? Reset the clock. (Refer to page 19.) ● When a button is pressed, the unit does not respond. ● Set this unit to the power stand-by mode and then turn it back on. ● If the unit still malfunctions, reset it. (Refer to page 74) ● No sound is heard.
CD-G10000DVD CP-G10000 Troubleshooting chart (continued) ENGLISH H Remote control Symptom ● The remote control does not operate.
Troubleshooting chart (continued) CD-G10000DVD CP-G10000 Error indicators and warnings H Clearing all the memory (reset) H 1. Press the ON/STAND-BY button to enter the power stand-by mode. 2. Whilst pressing down the I6 button and the X-BASS/DEMO button, press the 5 3 PRESET X button until “CLEAR AL” appears. The error indicators and warnings described below appear on the display whenever there is a disc play problem, operational problem. etc.
CD-G10000DVD CP-G10000 ENGLISH Troubleshooting Maintenance chart (continued) Specifications H Cleaning the tape-handling parts As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
Specifications (continued) ENGLISH H Surround Speaker Signal system NTSC/PAL Type Supported disc types DVD (Region number 2, ALL), audio CD, CD-R, CD-RW, VCD, MP3, WMA Full-range speaker system 10 cm (4") woofer x 2 Maximum input power 130 W Video output Output socket: Pin socket x 1 Output level: 1 Vp-p (75 ohms) Rated input power 65 W Impedance 16 ohms S-Video output Y output level: 1 Vp-p (75 ohms) C output level: 0.
CD-G10000DVD CP-G10000 Glossary ENGLISH Chapter A section inside a title. DIGITAL GAMMA Corrects for gradations in dark areas of images to make them clearer. Parental level Setting that makes it possible to control the types of scenes that can be played by this unit. This setting helps to keep children from viewing adult material. DIGITAL SUPER PICTURE Enhances the fine details of the image and outlines of the objects. Pickup Laser device that reads the data from a disc for playback.
UP CD-G10000DVD/CP-G10000 DVD MINI SYSTEM/SPEAKER SYSTEM DOWN
