Operating instructions
Chapter 12 Operating Instructions
C4000 Standard/Advanced
110 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8009861/WA65/2012-06-12
Subject to change without notice
Ordering information
12.5 Additional front screen (weld spark guard)
Two additional front screens (weld spark guards) supplied for each part number.
The additional front screen fits both on the sender and on the receiver.
The additional front screen may be used only if the curved enclosure side is accessible.
An additional front screen reduces the scanning range of the system by 8%. If sender
a
nd receiver each use an additional front screen, the scanning range will be reduced by
16%.
Protective field height
[mm]
Part number Protective field height
[mm]
Part number
300 2022412 1200 2022418
450 2022413 1350 2022419
600 2022414 1500 2022420
750 2022415 1650 2022421
900 2022416 1800 2022422
1050 2022417
12.6 Deflector mirror
12.6.1 Deflector mirror PNS75 for protective field width 0 … 12 m (total)
Protective field height [mm] Type code Part number
300 PNS75-034 1019414
450 PNS75-049 1019415
600 PNS75-064 1019416
750 PNS75-079 1019417
900 PNS75-094 1019418
1050 PNS75-109 1019419
1200 PNS75-124 1019420
1350 PNS75-139 1019421
1500 PNS75-154 1019422
1650 PNS75-169 1019423
1800 PNS75-184 1019424
Dimensional drawing see Fig. 52 on page 91. Effect on the scanning range see Tab. 8 on
page 27.
Notes
Tab.
59
:
Part numbers
additional front screen (weld
spark guard)
Tab.
60
:
Part numbers
deflector mirror PNS75