Operating instructions
Operating Instructions
C4000 Standard/Advanced
4 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8009861/WA65/2012-06-12
Subject to change without notice
List of contents
5 Installation and mounting.............................................................................................. 40
5.1 Determining the minimum distance.................................................................. 40
5.1.1 Minimum distance from the hazardous point................................. 40
5.1.2 Minimum distance to reflective surfaces........................................ 43
5.2 Steps for mounting the device...........................................................................44
5.2.1 Mounting with swivel mount bracket............................................... 45
5.2.2 Mounting with side bracket.............................................................. 47
5.2.3 Mounting the C4000 Guest with side bracket................................ 49
5.2.4 Mounting the C4000 Guest with swivel mount bracket Guest...... 50
6 Electrical installation ..................................................................................................... 51
6.1 System connection M26×11 + FE.................................................................... 52
6.2 Configuration connection M8× 4 (serial interface)........................................... 53
6.3 Extension connection M26× 11 + FE ................................................................ 54
6.4 Extension connection M12× 7 + FE .................................................................. 55
6.5 System connection C4000 Guest (M12×7 + FE) ............................................56
6.6 External device monitoring (EDM) ..................................................................... 57
6.7 Reset button ....................................................................................................... 58
6.8 Teach-in key-operated switch ............................................................................ 59
6.9 Emergency stop .................................................................................................. 60
6.10 Key-operated pushbutton for bypass ................................................................ 61
6.11 Signal output (ADO) ............................................................................................ 61
6.12 Test input (sender test) ...................................................................................... 62
6.13 sens:Control applications................................................................................... 62
7 Commissioning................................................................................................................ 63
7.1 Display sequence during power-up....................................................................63
7.2 Aligning sender and receiver.............................................................................. 63
7.3 Test notes............................................................................................................64
7.3.1 Tests before the first commissioning .............................................. 64
7.3.2 Regular inspection of the protective device by qualified
safety personnel ............................................................................... 64
7.3.3 Daily functional checks of the protective device ............................ 65
8 Configuration................................................................................................................... 66
8.1 Default delivery status ....................................................................................... 66
8.2 Preparing the configuration ............................................................................... 66
9 Care and maintenance ................................................................................................... 67