CD-XP160W SERVICE MANUAL No. S3321CDXP160W MINI COMPONENT SYSTEM MODEL CD-XP160W CD-XP160W Mini Component System consisting of CDXP160W (main unit) and CP-XP160 (speaker system). • In the interests of user-safety the set should be restored to its original condition and only parts identical to those specified be used. CONTENTS Page SAFETY PRECAUTION FOR SERVICE MANUAL ........................................................................................................... 2 VOLTAGE SELECTION .......
CD-XP160W SAFETY PRECAUTION FOR SERVICE MANUAL Precaution to be taken when replacing and servicing the Laser Pickup. The AEL (Accessible Emission Level) of Laser Power Output for this model is specified to be lower than Class 1 Requirements. However, the following precautions must be observed during servicing to protect your eyes against exposure to the Laser beam. Laser Diode Properties Material: GaAIAs Wavelength: 780 nm Emission Duration: continuous Laser Output: max. 0.
CD-XP160W FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO THE OPERATION MANUAL. SPECIFICATIONS ■ General Power source Power consumption Dimensions Weight ■ Tuner Frequency range AC 110/127/220/230 - 240 V, 50/60 Hz 70 W ■ Cassette deck Width: 270 mm (10-5/8") Height: 305 mm (12") Depth: 343 mm (13-1/2") Frequency response Signal/noise ratio 6.6 kg (14.5 lbs.
CD-XP160W ■ Display 1. CD Play Indicator 2. CD Repeat Play Indicator 3. FM Station Indicator 4. AM Station Indicator 5. Disc Number Indicators 6. Clock Indicator 7. Sleep Indicator 8. Timer Play Indicator 9. Tape 1 Record Indicator 10. CD Pause Indicator 11. FM Stereo Mode Indicator 12. FM Stereo Receiving Indicator 13. Memory Indicator 14. CD Random Play Indicator 15. Extra Bass Indicator ■ Rear panel 1. AC Voltage Selector 2. AC Power Input Socket 3. FM 75 Ohms Aerial Terminal 4.
CD-XP160W DISASSEMBLY Top Cabinet Caution on Disassembly Follow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure excellent performance: 1. Take cassette tape and compact disc out of the unit. 2. Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit. 3. Take off nylon bands or wire holders where they need to be removed when disassembling the unit.
CD-XP160W Front Panel (P1)x3 ø3x24mm Display PWB (P2)x1 (P2)x1 (G2)x1 Display PWB (Q1)x2 ø3x8mm (H1)x10 ø2.5x10mm Power Switch PWB Tape Mechanism Loading Tray CD Servo PWB (J1)x8 ø3x10mm Open (G1)x3 ø2.5x10mm (P2)x2 Cassette Holder Loading Switch PWB (P2)x1 (L1)x2 ø2.5x10mm (K1)x1 ø2.5x10mm Figure 6-3 (R1)x4 ø2.
CD-XP160W REMOVING AND REINSTALLING THE MAIN PARTS (A1)x1 ø2x7mm TAPE MECHANISM SECTION Perform steps 1 to 6 and 9 of the disassembly method to remove the tape mechanism. Hook (A2)x2 How to remove the record/playback and erase heads (TAPE 1) (See Fig. 7-1) TAPE 1 (A1)x1 ø2x3mm Record/Playback Head 1. When you remove the screws (A1) x 2 pcs., the record/ playback head can be removed. 2. Move the hooks (A2) x 2 pcs., toward the center position as shown in Fig. 7-1 and then lift the erase head.
CD-XP160W CD MECHANISM SECTION Perform steps 1, 2, 3, 12, 13, 14 and 16 of the disassembly method to remove the CD mechanism. (B1)x4 ø3x8mm (B1)x2 ø3x8mm How to remove the T/T up/down motor (See Figs. 8-1, 8-2) Loading Tray (A1)x4 ø3x8mm 1. Remove the screws (A1) x 4 pcs. 2. Remove the belt (A2) x 1 pc. 3. Remove the screws (A3) x 2 pcs., to remove the T/T up/ down motor. Figure 8-1 (B3)x2 ø2.4x3mm (A3)x2 ø2.4x3mm (B2)x1 (A2)x1 How to remove the loading motor (See Figs.
CD-XP160W ADJUSTMENT MECHANISM SECTION TUNER SECTION • Driving Force Check fL: Low-range frequency fH: High-range frequency • AM IF/RF Signal generator: 400 Hz, 30%, AM modulated Torque Meter Specified Value Play: TW-2111 Tape 1: Over 80 g Tape 2: Over 80 g • Torque Check Torque Meter Frequency Frequency Display Setting/ Instrument Adjusting Connection Parts AM IF 450 kHz 1,602 kHz T351 AM Band Coverage — 531 kHz (fL): T306 *2 1.1 ± 0.
CD-XP160W TEST MODE PLAY + DISC SKIP test04 TIMER ON/OFF TEST MODE STOP + DISC SKIP test05 VFD DISPLAY WINDOW TEST MODE FL DISPLAY: VFD ALL LIGHT FUNCTION: TEST THE VFD DISPLAY WINDOW FL DISPLAY: PLAY + OPEN/CLOSE test08 OPEN/CLOSE & 3 DISC CHANGER AGING TEST DISPLAY: FUNCTION: Request: Enter the TEST MODE 8, MCU control the 3 DISC CHANGER OPEN/CLOSE. After open finished, tray rotate 1 circle (360 degree). Then close, After close finished, tray rotate 1 circle (360 degree) again.
CD-XP160W PLAY + VOLUME DOWN test06 FRONT PANEL KEY TEST FL DISPLAY: FUNCTION: THEN FRONT PANEL KEY TEST MODE,IF ALL KEY HAVE BEEN PRESSED 1 TIME, PRESS THE "POWER" KEY, VFD DISPLAY "OK". PLAY + VOLUME UP test03 VOLUME TEST MODE FL DISPLAY: FUNCTION: PLAY + TUNER 1. TEST 3 DISPLAY 1 SECOND. THEN CHANGE TO CD FUNCTION. 2. IN CD FUNCTION (Pickup IN CHECK DISC1 SW TOC_IL No DISC RECEIVE OPEN/CLOSE KEY OPEN RECEIVE OPEN/CLOSE KEY CLOSE) 3.
CD-XP160W NOTES ON SCHEMATIC DIAGRAM • Resistor: To differentiate the units of resistors, such symbol as K and M are used: the symbol K means 1000 ohm and the symbol M means 1000 kohm and the resistor without any symbol is ohm-type resistor. Besides, the one with “Fusible” is a fuse type. • Capacitor: To indicate the unit of capacitor, a symbol P is used: this symbol P means pico-farad and the unit of the capacitor without such a symbol is microfarad.
CD-XP160W VOLTAGE IC101 PIN VOLTAGE NO. 1 18.8 V 0.6 V 2 3 5.6 V IC102 PIN VOLTAGE NO. 1 18.8 V 0V 2 3 10 V IC103 PIN VOLTAGE NO. 1 18.8 V 0V 2 3 8V IC201 PIN VOLTAGE NO. 1 0.14 V 29 V 2 3 0.15 V –29 V 4 0V 5 0.3 V 6 0V 7 0V 8 0V 9 10 0 V 11 0.3 V 12 0 V 13 0 V 14 0 V 15 29 V IC402 PIN VOLTAGE NO. 1 0V 4.2 V 2 3 5.1 V 2.7 V 4 2.4 V 5 4.3 V 6 1.7 V 7 2.7 V 8 3.5 V 9 10 2.7 V 11 4 V 12 0 V 13 3.8 V 14 0 V 15 0 V 16 0 V 17 2.7 V 18 0 V 19 2.7 V 20 2.7 V 21 2.7 V 22 2.7 V 23 2.7 V 24 3.
CD-XP160W TO DIS SW1 OPEN CLOSE SW2 DISC SW3 UP M3 T/T UP/DOWN MOTOR Q402,403 Q405~408 M 6 LOAD– LOAD+ MOTOR DRIVER M4 CD LOADING MOTOR 7 LED POW_SW D_GND CNS701 M_GND Q409 Q410 M ROTATE 3 37 38 U CONSTANT VOLTAGE 39 D 40 LO 41 PI +5V Q404 42 C 43 N D_GND +6.
CD-XP160W TO DISPLAY SECTION CNP701 6 5 4 3 1 2 8 7 6 5 4 3 2 1 CNS101 SPAN D_GND CHANEL_SW M_GND 6R2V +B5 P_STB P_MUTE +B3 5.
CD-XP160W FM RF L302 L303 FM MUTE LEVEL 24 23 OSC BUFF FM OSC Q302 AM TRACKING 4 5 9 17 13 8 4 5 DI 6 7 CD+B 3 CE 2 CL 1 X351 456 kHz AM IF GND MO/ST FM VCC DET VCO L 14 IC303 LA1832S AM OSC IN VR351 AM MIX FROM CD SECTION CNS105 +B2 R 15 FM/AM OUT MPXIN FM/AM 21 10 7 6 18 +B 12 16 SD CNP301 CF351 T351 CF352 AM IF STEREO FM OSC IC303 LA1832S FM IF DET./ FM MPX./AM IF 1 2 IF OUT BF301 2 1 CF302 6 IC301 TA7358AP 1 FM FRONT END 9 2 3 4 5 7 8 B.P.F DZ5.
CD-XP160W VFD701 FL DISPLAY FROM CD SECTION CNS105 B2 1 2 3 ~ 10 30 31 18 ~ 29 32 33 +B4 CL DI 7 8 9 28 29 10 ~ 26 KEY3 13 KEY1 10 VDD VEE 6 8 9 14 27 +B3 -B2 DIN STB ~ 30 37 CNP701 1 2 3 4 5 6 7 +B3 KEY SW702~SW715 ~ RX701 38 ~ REMOTE SENSOR INTR CLK +B4 VDD IC701 SC16312 SYSTEM MICROCOMPUTER 15 FROM CD SECTION CNS701 46 VDD SD 6 TAPE_DET 5 CD+B 4 CE 3 DO CNP105 2 DATA CLK STB Q701 LED701 D_GND POW_SW +B2 SW701 POWER LED IC902 NJM4558D OPE. AMP.
CD-XP160W A AM TRACKING FM MUTE LEVEL C330 12P (CH) T302 R358 8.2K FM SIGNAL AM SIGNAL 10K(B) VR351 +B C331 0.047 C332 0.022 L353 1µH B VD301 SVC348S C329 0.022 D301 1N4148 +B AM OSC. R351 5.6K R336 5.6K C C334 27P (UJ) D302 1N4148 R323 68K C337 0.022 C335 560P T306 AM BAND COVERAGE fL 2.1V C351 0.022 1 CF302 2 C FM IF IC301 FM FRONT END TA7358AP 1.5V 5.2V 1.5V 0V 5.2V 4.4V 3.8V 5.2V BAND PASS FILTER 0.
7 C384 0.001 8 FM MO/ST IF REQ I 18 17 16 15 14 13 12 F IN TP301 R377 5.6K +B 9 R387 5.6K AM IF 3 4 5 6 7 8 9 10 11 C370 1/50 C356 0.001 R355 3.3K MPX IN R-CH OUT L-CH OUT PHASE MO/ST (AM/FM) PHASE 13 IF OUT 14 10 11 12 3.8V (1.2V) 3.8V (1.9V) 0V 5V 15 VCC 16 9 R376 10K C355 22P C398 100/10 FM DET FM/AM OUT 4V (2.2V) 1.3V 1.3V 2.1V 2.3V (0V) 0V (0.9V) R350 2.7K C368 1/50 C369 56P R356 1K X351 456 kHz C367 1/50 C371 R361 1/50 5.6K +B R363 3.3K R364 3.
CD-XP160W MAIN PWB-A1 (2/3) PLAYBACK SIGNAL RECORD SIGNAL A TAPE MECHANISM ASS'Y (223) SW5(223-6) PLAY SW6(223-7) FF/REW B SW7(223-7) FF/REW 4 3 2 1 3 2 1 R CNP803 SW8(223-6) PLAY M2(223-8) TAPE MOTOR M A B + – 3 2 1 D804 D802 1N4148 TAPE2 4 1N4148 TAPE1 3 2 1 1 CNP804 C TAPE MOTOR PWB-E(223-9) 2 2 3 3 T1_R A_GND R808 10K T1_L R802 1K CNP801 D R813 1 C810 R806 100/25 27 L-CH 1 C801 560P R-CH C812 0.0027 R801 1K C802 560P TAPE2 PLAYBACK HEAD (223-3) C815 0.
CD-XP160W CHANEL_SW TAPE L TAPE R REC R REC L R837 1K R834 47K +10V +B M_GND A_GND TAPE_DET +B R823 62K D804 R838 5.6K MOTOR 2 3 4 5 6 7 TO MAIN PWB (3/3) MAIN SECTION P23 7 - B 8 9 10 R828 62K R835 22K D803 1N4148 1N4148 D802 1N4148 +B 1 C840 220/16 C812 0.0027 R801 1K +B R826 10K C829 0.0033 R824 C827 100 0.022 C831 47/25 C834 220/16 C833 22/50 C835 0.022 +B +B R P 10 D801 1N4004 9 SW801 A 11 12 P R C826 22/50 R836 10K C832 47/25 C830 0.
CD-XP160W A FROM CD SERVO PWB P25 12 - B CNS105 FROM CD SERVO PWB P25 9 - A CNS101 FROM CD SERVO PWB P25 12 - E CNS103 SW102 SPAN SELECTOR FM/AM (kHz) 50/9 100/10 TO MAIN PW TAPE SEC P21 11 CNP103 9 8 10 7 6 5 4 3 2 1 +5.
CD-XP160W +B C910 470P 8 7 6 5 IC902 1 2 3 4 5 6 C905 470P R909 4.7K 4 3 2 1 R910 4.7K R908 10K VR901 MIC LEVEL TO MAIN PWB (2/3) TAPE SECTION P21 11 - B R916 39K 7 8 IC901 C906 4.7/16 R906 1K C912 1/16 R911 39K R915 39K C907 100/16 R904 330 C903 100/16 R907 10K R905 33K NJM4558D OPE. AMP. R903 39K R913 100 NJM4558D OPE. AMP. C904 220P C901 0.0015 CHASSIS GND +B C902 0.22/16 R902 1K R901 2.
CD-XP160W CD SERVO PWB-A2 A LOADING SWITCH PWB-D +B CD SIGNAL SW1 OPEN CLOSE LOAD+ SW3 UP B 2 2 2 3 3 3 4 4 4 LOAD– CNW401 M_GND ROTATE LOAD SW DISC_SW Q402 KSC3203 Y UP-DOWN MOTOR PWB-A6 M3 T/T UP/DOWN MOTOR M + R421 22K R418 1.5K UP_SW R419 3.3K CNW402A 1 1 1 2 2 2 3 3 4 4 R919 68 R437 3.3K Q409 KSC1815 GR C460 0.022 Q408 KSC3203 Y R438 2.7K M+ M– Q410 KSA1271 Y ROTATE+ ROTATE– D402 1N4004 CNP402 CNS402 R434 1.
CD-XP160W 2 1 8 7 6 5 4 3 2 1 3 2 1 8 7 6 5 4 3 2 1 6R2V P_STB P_MUTE M_GND SPAN CLK DATA CNW101 +B D401 1N4148 CHANEL_SW L404 2.2µH D405 1N4148 R482 1K +B R435B 1K R470 1K R468 1K R467 1K R465 1K R463 1K R461 1K R460 1K R459 1K C426 3.3/50 3 2 R435A 1K C460 0.022 R435C 3.3K Q411 KRC102 M 1 D406 1N4148 R441 100K R481 10K +B Q412 KSC1815 GR R471A 10K R471B 120 R442B 10K C422 0.
CD-XP160W EQUALISER X-BASS/DEMO A DISC SKIP SW712 SW708 TUNER (BAND) CD SW705 SW702 TUNING UP OPEN/CLOSE SW713 STOP TUNING DOWN SW706 SW703 TAPE SW709 PLAY/REPEAT SW710 SW714 B PRESET UP PRESET DOWN SW707 SW704 VOLUME UP SW711 VOLUME DOWN SW715 VF2 1SS133 1SS133 D703 D701 P14 P13 P12 P10 P9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 P8 9 P7 G8 8 P5 G7 7 P6 G6 6 P4 G5 5 P3 G4 4 P2 G3 3 P1 G2 2 G1 VF1 1 P11 VFD701 FL DISPL
CD-XP160W DISPLAY PWB-B SKIP CLOSE REPEAT 1SS133 1SS133 RX701 GP1UM271 REMOTE SENSOR D704 D703 1SS133 D702 D701 1SS133 ME DOWN 3 2 POWER SWITCH PWB-A4 SW701 POWER ON/STAND-BY 1 R701 1K C701 100/10 C702 0.047 R704 10K CNP702 10K +B KEY1 10 D11 C704 100P C705 100P LED701 SD3210W+ Q701 KSC1815 GR KEY3 KEY4 KEY2 11 C703 R713 270 5V VDD SEG1/KS1 SEG2/KS2 SEG3/KS3 SEG4/KS4 SEG8 R706 10K SEG5/KS5 R705 10K SEG7 12 SEG6/KS6 22 21 20 19 18 17 16 15 14 13 D9 R712 2.
CD-XP160W MAIN PWB-A1 CNW110 RD A 1 2 BK 3 AM TRACKING T302 R363 C372 R361 R362 R356 C368 X351 C371 Q117 E C B C373 T306 AM BAND COVERAGE fL TP302 C145 R135 D118 CNP108 C126 D120 L101 R139 R137 R205 R108 R109 R220 R206 R107 FRONT B C E B C E B C E R136 R204 Q102 Q103 C125 R120 R123 C127 LEFT Q104 RLY101 L102 C128 5 4 3 2 1 SO102 SPEAKER TERMINAL R366 R377 R393 C363 C354 R376 C353 Q351 13 D104 D R395 R383 L352 C356 IC303 15 C366 C365 3 2 1 C358 C350
CD-XP160W P30 1 - C FROM CD SERVO PWB P30 1 - D FROM CD SERVO PWB P33 11 - D FROM DISPLAY PWB CNS101 CNS102 CNS105 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 CNP101 CNP105 C142 R621 C141 R618 R622 R215 D603 C618 C818 R816 R101 R812 R141 C912 C907 R910 R908 1 2 3 4 IC902 8 7 6 5 C904 R901 A E B F CNP801 3 2 1 D106 1 C210 C G D H C901 R903 C902 2 3 C804 IC101 P35 10 - A P35 10 - D FROM MECHANISM SWITCH FROM MOTOR C809 C806 R806 R801 C805 C808 R902 4 3 2 1 P35 11 - G CHA
CD-XP160W A CNS405 GY GY GY GY GY WH 6 5 4 3 2 1 CNW405 C416 25 C401 C403 R450 R409 R427 R429 20 14 R424 R423 R425 R426 GY GY GY GY GY GY BK R428 15 10 WH RD 10 9 8 7 6 5 4 3 2 1 P29 8 - B TO MAIN PWB CNP105 5 R412 CNS105 C 28 R401 1 IC404 BK RD RD B C E R408 1 BK 1 7 Q404 3 WH C417 3 2 1 BR WH CNW103 P29 9 - C TO MAIN PWB CNP103 B MR401 CORE CNS103 C450 C447 C448 R485 R456 B C E B C E B C E B C E C425 C438 X403 R406 R405 CNW406 GY GY GY GY GY GY BK C
CD-XP160W COLOR TABLE NM801 SLED MOTOR 6 5 4 3 2 1 CNP405 BR BROWN RD(R) RED OR ORANGE YL YELLOW GR GREEN BL BLUE VL VIOLET GY GRAY WH(W) WHITE BK BLACK PK PINK + - SW4 PICKUP IN + CD MOTOR PWB-C NM802 SPINDLE MOTOR UP-DOWN MOTOR PWB-A6 - CNS406 1 2 3 4 5 6 7 8 BK WH WH WH WH WH WH WH – + 1 7 M3 1 CNS407 7 6 5 4 3 2 1 R919 T/T UP/DOWN MOTOR CNW402A 1 2 PICKUP UNIT(308) WH BL GY GY GY GY GY GY BK 8 LOADING MOTOR PWB-A7 LOADING SWITCH PWB-D SW3 UP – SW2 DISC +
CD-XP160W A DISPLAY PWB-B C703 C RX701 REMOTE SENSOR 7 6 5 4 3 2 1 R712 R701 IC701 R702 34 44 C702 C701 1 3 2 R705 R704 R706 C704 1 C705 CNP701 P30 2 - D FROM CD SERVO PWB CNS701 B 33 35 30 40 25 20 5 15 10 23 22 12 11 VFD701 FL DISPLAY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 2 D704 D SW708 EQUALISER/ X-BASS/DEMO D702 SW709 TAPE [1–2] D703 SW TU (BA SW711 VOLUME UP E SW713 OPEN/ CLOSE F SW712 DISC SKIP SW715 VOLUME DOWN SW704 PRESET UP SW707 P
CD-XP160W -B BR BROWN RD( R) RED OR ORANGE YL YELLOW GR GREEN BL BLUE R703 LED701 VL VIOLET GY GRAY WH( W) WHITE BK BLACK PK PINK 22 21 22 23 24 25 26 27 28 29 30 31 32 33 CNW102 D701 GY GY 6 D702 703 SW702 CD SW705 TUNER (BAND) D706 1 2 3 CNP702 CNS106 1 2 3 BK 1 GY GY 1 2 3 BK CNP106 3 E C B 1 2 3 4 CNS102 CNP102 R711 R707 Q701 R713 P29 8 - B P28 4 - F TO MAIN PWB COLOR TABLE WH CNS702 C706 C707 R708 SW707 PRESET DOWN TUNING SW706 DOWN 1 2 CNW70
CD-XP160W A P28 4 - F TO MAIN PWB CNP104 CNS104 1 2 3 4 5 6 7 BK GY GY GY GY GY GY B POWER PWB-F 1 8 CNW104 C D E T101 POWER TRANSFORMER F 110V 127V 230~240V 220V SO101 AC INPUT SOCKET AC 110/127/220 230~240V, 50/60 Hz G SW101 VOLTAGE SELECTOR AC 110/127/220 230~240V, 50/60 Hz AC POWER SUPPLY CORD H 1 2 3 4 Figure 34 WIRING SIDE OF P.W.
CD-XP160W YL OR RD BR 4 3 2 1 P29 9 - D CNP803 TO MAIN PWB RD RD SW5(223-6) TAPE 1 PLAY YL SW6(223-7) TAPE 1 FF/REW RD SW7(223-7) TAPE 2 FF/REW SW8(223-6) TAPE 2 PLAY TAPE MOTOR PWB-E RD M2(223-8) TAPE MOTOR RD A B + - WH BK TAPE 1 TAPE 2 RECORD/PLAYBACK HEAD (223-3) PLAYBACK HEAD (223-3) COLOR TABLE RD WH BK RD BK WH ERASE HERAD (223-2) P29 9 - E CNP804 TO MAIN PWB 3 2 1 BR 3 2 1 1 2 3 4 CNP802 P29 10 - G TO MAIN PWB 7 8 9 RD WH BK RD BK WH BK BK BR BK BROWN RD(R)
CD-XP160W FUNCTION TABLE OF IC IC402 VHiAN22000A-1: Head Amp. (AN22000A) Function Terminal Name 1 PD APC amp input. 2 LD APC amp output. 3 VCC Power supply. 4 RFN RF amp inverting input. 5 RFOUT RF addition amp output. 6 RFIN AGC amp input. 7 CAGC AGC loop filter connection. 8 ARF AGC output. 9 CEA Capacitor for HPF-amp connection. 10 3TOUT 3T-ENV output. 11 CBDO Capacitor for RF dark-side envelope detection connection. 12 BDO BDO output.
CD-XP160W IC401 VHiMN6627482W: Servo/Signal Control (MN6627482W) (1/2) Pin No. Terminal Name Input/Output Function 1* BCLK Output SRDATA bit clock output. 2* LRCK Output L/R identification signal output. 3* SRDATA Output 4 DVDD1 Input Digital circuit power supply. 5 DVSS1 Input Digital circuit GND. 6* TX 7 MCLK Input Microcomputer command clock signal input. (Data latch at the rising edge.) 8 MDATA Input Microcomputer command data input.
CD-XP160W IC401 VHiMN6627482W: Servo/Signal Control (MN6627482W) (2/2) Pin No. Terminal Name Input/Output Function 47 DSLF Input/Output DSL loop filter terminal. 48 PLLF Input/Output PLL loop filter terminal. 49 VCOF Input/Output 50 AVDD2 Input Analog circuit power supply. (DSL, PLL and DA output sections for AD) 51 AVSS2 Input Analog circuit GND. (DSL, PLL and DA output sections for AD) 52* EFM, CK384 Output · IOSEL=H: EFM signal output. · IOSEL=L: X-tal system 16.
CD-XP160W SRDATAIN(PSEL) BCLKIN(SSEL) LRCKIN(MSEL) IOSEL DEMPH SUBC SBCK GIO1(/CLDCK) BLKCK CRC CLVS FLAG6(RESY) CLV SERVO DIGITAL AUDIO INTERFACE Figure 39 BLOCK DIAGRAM OF IC – 39 – PWM (L) PWM (R) + - + - OUTL 16k SRAM IPFLAG FLAG SENSE WVEL INTER POLATION SOFT MUTING DIGITAL ATTENUATION LDON /FLOCK /TLOCK FBAL TBAL FOD TRD TVD VREF TRV KICK TOFS DMUTE D/A CONVERTER 1 BIT DAC PWMLOGIC OUTR AVDD1 AVSS1 AVSS2 SUBQ SOCK(GIO0) SSEL DEINTERLEAVE CPU SERVO TIMING GENERATOR OFT PSEL R
CD-XP160W FL DISPLAY VFD701 VVK250808//-1 1G 2G 3G 4G 5G 6G 7G 1 FM AM 2 3 REC 8G M H z MP3 kHz ST MEMORY RANDOM X-BASS SLEEP 8G a k f j h b g m r e i n c d ( PIN NO. 1 2 CONNECTION F F PIN NO.
CD-XP160W PARTS GUIDE MINI COMPONENT SYSTEM MODEL CD-XP160W CD-XP160W Mini Component System consisting of CDXP160W (main unit) and CP-XP160 (speaker system). “HOW TO ORDER REPLACEMENT PARTS” To have your order filled promptly and correctly, please furnish the following information. 1. MODEL NUMBER 2. REF. No. 3. PART NO. 4. DESCRIPTION For U.S.A. only Contact your nearest SHARP Parts Distributor to order.
CD-XP160W NO.
CD-XP160W NO.
CD-XP160W NO.
CD-XP160W NO.
CD-XP160W NO. 701 702 703 704 NM801 NM802 SW4 PRICE RANK PART CODE LX-WZ1070AFZZ XBBSD20P03000 XBSSD26P06000 XHBSD20P05000 RMOTV0013SJM1 RMOTV0003SJM1 QSW-F9001AWZZ J J J J J J J AA AA AA AA AM AP AE DESCRIPTION Washer,ø1.5×ø3.8×0.25mm Screw,ø2×3mm Screw,ø2.
CD-XP160W NO. 1 PRICE RANK PART CODE QANTW0005SJZZ QPLGA9004SJZZ J J RRMCG0062SJSA SPAKA0150SJZZ SPAKA0151SJZZ SPAKC0284SJZZ J J J J SPAKC0315SJZZ J SPAKG0003SJSA SSAKA0002SJZZ SSAKH0021SJZZ SSAKK0007SJZZ TCAUZ0033SJZZ TGANE0005SJ01 J J J J J J TINSE0136SJZZ J TINSZ0194SJZZ J TLABG0064SJZZ TLABZ0069SJZZ J J TLABZ0070SJZZ J TLABZ0091SJZZ J TLABZ0109SJZZ TLABZ0113SJZZ J J TLABZ0114SJZZ J TLABZ0115SJZZ J TLSTS0006SJZZ ———— J DESCRIPTION NO.
CD-XP160W 308-2 A 308 308-1 308-3 703 701 B 703 304 C 303 302 704 D 301 702x2 E NM802 F NM801 G SW4 H PWB-C 1 2 3 4 Figure 7 CD MECHANISM EXPLODED VIEW –7– 5 6
CD-XP160W 615x7 601x2 203 A 607x2 202-1 608x3 203-1 614 A 202-2x2 606x2 B 601 612x2 235x6 231 611x2 IC201 608x2 B 614x2 z {zy ,|{ y , | z z {y ,|{ y , | 203-2 PWB-A1 610x2 IC103 232 Silicon Grease Silicon Grease 610x2 PWB-A4 240 201 606x2 243 610x3 242 621 201-1 227 610x10 617 233 241 C 202 IC102 224x2 PWB-A5 610 234 237 220 610x2 PWB-A8 230 221 208 239 D 611x2 VFD701 PWB-B 205-4 (M802) 225 605x2 602x4 205-1 T101 222 205 201-2 606x2 205-3 205-2 219 E
CD-XP160W 614 251 616x2 252 608 253 A 254 255 206 256 B 616x2 238 282 257x2 C 258 CD MECHANISM 283 618 259 D PWB-D SW1 SW3 SW2 618 260 262 611 606x2 261 264 614x2 284 281x4 615 280x4 618 263 279x2 617x2 619x4 620x3 620x3 258 M3 E PWB-A6 611x4 618 265 618 278 606x2 267 260 271 618 268 266 F PWB-A7 269 275 277 616 276 M4 607x2 274 606x2 270 272 611x4 G PWB-A2 272 273 A 272 B 207 H 613x3 1 2 3 4 Figure 9 CABINET EXPLODED VIEW (2/2) –9– 5 6
CD-XP160W —MEMO— – 10 –
CD-XP160W COPYRIGHT © 2003 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.
