MINI COMPONENT SYSTEM Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. CD-XP160W Mini Component System consisting of CD-XP160W (main unit) and CP-XP160 (speaker system). MODEL CD-XP160W OPERATION MANUAL *CDXP160WSCA_FRONT 1 02.12.
CD-XP160W Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. - Introduction / Special notes - Important Instruction Special notes Warning: z When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit.
Accessories CD-XP160W Please confirm that the following accessories are included. "AA" size battery (UM/SUM-3, R6, HP-7 or similar) 2 AM loop aerial 1 AA FM aerial 1 AA AC power lead 1 Note: Only the above accessories are included. Contents Page T General Information T Preparation for Use Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 6 System connections .
CD-XP160W Precautions General z z - Precautions - General Information z z z z z z z z Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the equipment. Use the unit on a firm, level surface free from vibration. Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.
Controls and indicators CD-XP160W Reference page 1. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2. Timer Set Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 3. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 5. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 22 6.
- Controls and indicators - General Information CD-XP160W Controls and indicators (continued) T Display 1. CD Play Indicator 2. CD Repeat Play Indicator 3. FM Station Indicator 4. AM Station Indicator 5. Disc Number Indicators 6. Clock Indicator 7. Sleep Indicator 8. Timer Play Indicator 9. Tape 1 Record Indicator 10. CD Pause Indicator 11. FM Stereo Mode Indicator 12. FM Stereo Receiving Indicator 13. Memory Indicator 14. CD Random Play Indicator 15.
CD-XP160W 2 12 3 13 4 14 5 6 15 16 7 8 17 9 18 19 10 11 Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 22 4. Tape Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 23 5. Memory Button . . . . . . . . . . . . . . . . . . . . . . . . . .
System connections - System connections - Preparation for Use CD-XP160W 7 02/5/27 CD-XP160W(SCA)E1.
CD-XP160W T T Aerial connection Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM aerial wire in the direction where the strongest signal can be received. Speaker connection Connect the black wire to the minus (-) terminal and the red to the plus (+) terminal. Right speaker Left speaker Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception.
CD-XP160W System connections (continued) T Setting the AC voltage selector Check the setting of the AC voltage selector located on the rear panel before plugging the unit into a wall socket. If necessary, adjust the selector to correspond to the AC power voltage used in your area. T - System connections - Preparation for Use Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110 V, 127 V, 220 V or 230 V - 240 V AC).
CD-XP160W Setting the FM/AM span selector Demonstration mode The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll. Note: When the power is on, the EQUALIZER/X-BASS/DEMO button can be used to select the pre-programmed equaliser and extra bass modes.
CD-XP160W Remote control T Battery installation 1 2 3 Remove the battery cover. Insert the batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them towards the battery terminals. Replace the cover. T Test of the remote control Check the remote control after checking all the connections (see pages 7 - 9). Point the remote control directly at the remote sensor on the unit.
Sound control CD-XP160W T Pre-programmed equaliser/Extra bass (X-BASS) When the power is first turned on, the unit enters the X-BASS mode, “X-BASS” is lit and the equaliser is set to FLAT. The sound is not modified. JAZZ (X-BASS off) Treble is cut a little. ROCK (X-BASS off) Bass and treble are emphasised. CLASSIC (X-BASS off) Treble is reduced a lot. T Volume control Main unit operation: Press the or button to increase or decrease the volume.
CD-XP160W Setting the clock 4 Within 30 seconds, press the PRESET ( or ) button to adjust the hour and then press the MEMORY button. z - Setting the clock - Basic Operation 5 This may be operated only with the remote control. In this example, the clock is set for the 24-hour (0:00) display. 1 2 Press the ON/STAND-BY button to turn the power on. Press the CLOCK button and within 8 seconds, press the MEMORY button. Press the PRESET ( or ) button once to advance the time by 1 hour.
Listening to a CD (CDs) 4 Place the CD(s) on the disc tray, label side up. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the CD in the open position. CDs can be placed on any open position on the disc tray. Be sure to place 8 cm (3") CD(s) in the middle of the disc positions. 12 cm (5") 5 Press the OPEN/CLOSE button to close the disc tray.
CD-XP160W Listening to a CD (CDs) (continued) To interrupt playback: Press the CD button on the remote control. To resume playback from the same point, press the T button. To stop playback: Press the button. To locate the beginning of a track To move to the beginning of the next track: Press the button for less than 0.5 seconds during playback. To restart the track being played: Press the CD Playback - Listening to a CD (CDs) - To remove the CDs: Whilst in the stop mode, press the OPEN/CLOSE button.
Advanced CD playback T Starting playback with a desired track You can play a disc starting with the desired track. 1 2 Whilst in the stop mode, press one of the 1 - 3 buttons on the remote control or DISC SKIP button to select the desired disc. Press the or button to select the desired track. CD-XP160W T Repeat play All tracks on up to 3 discs, or a programmed sequence can be continuously repeated. To repeat all tracks on up to 3 discs: Press the / button twice.
CD-XP160W Advanced CD playback (continued) T Programmed play This may be operated only with the remote control. You can choose up to 20 selections for playback in the order you like. 1 CD Playback - Advanced CD playback - 2 Whilst in the stop mode, press one of the 1 - 3 buttons to select the desired disc. Selected disc number Adding tracks to the programme: If a programme has been previously stored, the "MEMORY" indicator will be displayed. Then follow steps 1 - 3 to add tracks.
Listening to the radio CD-XP160W 3 Press the TUNING ( sired station. or ) button to tune in to the de- Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. Auto tuning: z z Auto scan tuning will skip weak signal stations. To stop the auto tuning, press the TUNING button again. To receive an FM stereo transmission: Press the TUNER (BAND) button to display the "ST" indicator. z " " will appear when an FM broadcast is in stereo.
CD-XP160W Listening to the radio (continued) T Memorising a station Radio / Tape Playback - Listening to the radio / Listening to a cassette tape - This may be operated only with the remote control. You can store 30 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) 1 Perform steps 1 - 3 in "Tuning" on page 18. 2 Press the MEMORY button to enter the preset tuning saving mode. 3 Within 5 seconds, press the PRESET ( or ) button to select the preset channel number.
Press the ON/STAND-BY button to turn the power on. Press the button to open the cassette door. Load a cassette into the TAPE 1 or TAPE 2 cassette compartment with the side to be played facing toward you. 4 Press the TAPE button. 5 Press the back. button of TAPE 1 or TAPE 2 to start play- To stop playback: Press the button. Fast forward/rewind: To advance the tape, press the button, then press the button. To rewind, press the button, then press the button.
CD-XP160W Playing karaoke Karaoke - Playing karaoke - Notes: z When you sing too loud through the microphone, your voice may be distorted depending on the devices connected. If this happens, lower the microphone volume. z If an extremely sensitive microphone is used, howling may be generated. z Unidirectional microphone is more appropriate for vocal use. Karaoke play If squealing occurs: z Reduce the microphone volume. z Change the direction of the microphone. z Reduce the volume of the main unit.
Recording to a cassette tape z To protect the recorded sound, remove the tab after recording. Cover the tab hole with adhesive tape to record on the tape without the tab. Side A Tab for side B Tab for side A Recording from a CD (CDs) You can record 3 CDs continuously. 1 2 Press the ON/STAND-BY button to turn the power on. Load a cassette into the TAPE 1 cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed.
CD-XP160W Recording to a cassette tape (continued) T 1 2 Recording from the radio T Tune in to the desired station (see page 18). Load a cassette into the TAPE 1 cassette compartment with the side to be recorded on facing you. 1 2 Tape Recording - Recording to a cassette tape - Wind past the leader of the tape, on which recording cannot be performed. 3 4 Press the 5 Press the button of TAPE 1. Press the button of TAPE 1, which also engages the button.
Timer and sleep operation Sleep operation: The radio, compact disc and cassette tape can all be turned off automatically. Timer playback Before setting timer: 1 2 1 2 Press the CLOCK button to check that the clock is set to the correct time. (Refer to page 13.) Load the discs to be played. Press the ON/STAND-BY button to turn the power on. Press the CD or TUNER (BAND) button to select the desired function. When you selected the TUNER (BAND), tune into the desired station.
CD-XP160W Timer and sleep operation (continued) 6 Advanced Features - Timer and sleep operation - 7 Within 30 seconds, press the PRESET ( or ) button to specify the minute to start, then press the MEMORY button. T 1 2 The unit will enter the timer stand-by mode automatically. Sleep operation Play back the desired sound source. Press the SLEEP button. To change the sleep time: Press the SLEEP button repeatedly to select the desired sleep time. The time will decrease as follows.
Troubleshooting chart z z z T z z z z General Symptom The clock is not set to the correct time. When a button is pressed, the unit does not respond. No sound is heard. z z z z z z Playback stops in the middle or is not performed properly. Playback sounds are skipped, or stopped in the middle of a track. z z z z z z Symptom The radio makes unusual noises continuously. z z Possible cause Did a power failure occur? Reset the clock. (Refer to page 13.
CD-XP160W Troubleshooting chart (continued) T If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. References - Troubleshooting chart - If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again.
Maintenance T Cleaning the tape-handling parts TAPE 1 TAPE 2 Erase head Recording/Playback head Capstan z A B C D E C D Cleaning the cabinet Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth. Caution: z Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the cabinet finish. z Do not apply oil to the inside of the unit. It may cause malfunctions.
CD-XP160W Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. References - Specifications - T General Power source Power consumption Dimensions AC 110/127/220/230 - 240 V, 50/60 Hz 70 W Weight 6.6 kg (14.5 lbs.
WARRANTY Consumer Electronic Products Congratulations on Your Purchase! This Sharp product is warranted against faults in materials and manufacture for a period of twelve (12) months from the date of original purchase. If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre. These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.
IMPORTANT DO NOT RETURN THIS PAGE TO SHARP For your reference, please enter the particulars of your purchase below and retain, with your purchase documentation. Model No. Serial No. Date of Purchase Retailer FOR LOCATION ENQUIRIES WITHIN FOR PRODUCTS PURCHASED IN AUSTRALIA NEW ZEALAND REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.
