Mini Komponenten System CD-XP200H besteht aus CD-XP200H (Hauptgerät) und CPXP200H (Lautsprecher-System). Mini-chaîne CD-XP200H composée de CD-XP200H (appareil principal) et de CP-XP200H (enceintes acoustiques). MINI KOMPONENTEN SYSTEM MINI-CHAÎNE SISTEMA MINI MINI KOMPONENT SYSTEM MINI SISTEMI MINI SYSTEEM MINI SISTEMA DE COMPONENTES MINI COMPONENT SYSTEM MODELL MODÈLE MODELO MODELL Sistema mini CD-XP200H que consta de CD-XP200H (aparato principal) y CP-XP200H (sistema de altavoces).
BESONDERE ANMERKUNGEN REMARQUES SPÉCIALES NOTAS ESPECIALES SÄRSKILDA ANMÄRKNINGAR NOTE PARTICOLARI BIJZONDERE OPMERKINGEN NOTAS ESPECIAIS SPECIAL NOTES ● Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/ EWG und 73/23/EWG mit Änderung 93/68/EWG. ● Ce matériel répond aux exigences contenues dans les directives 89/336/ CEE et 73/23/CEE modifiées par la directive 93/68/CEE.
● Quando il tasto ON/STAND-BY si trova in posizione STAND-BY, all’interno dell’apparecchio c’è ancora la corrente. Se il tasto ON/STAND-BY si trova nella posizione STAND-BY, l’unità può essere accesa con il modo timer o con il telecomando. ● Når ON/STAND-BY-knappen er sat i STAND-BY positionen, er der stadig netspaending til stede i apparatet. Når ON/STAND-BY-knappen er sat i STAND-BY position, kan apparatet startes v.hj.a. timer-funksionen eller fjernbetjeningen.
● Vorsicht: Das Gerät weder Tropf- noch Spritzwasser aussetzen. Ansonsten besteht die Gefahr eines Brandes oder elektrischen Schlages. Es sollten keine mit Flüssigkeiten gefüllten Gegenstände wie Vasen auf dem Gerät abgestellt werden. ● Attention: Pour éviter un incendie ou une secousse électrique, mettre l’appareil à l’abri d’eau (éclaboussure, goutte). Ne pas poser sur l’appareil un récipient contenant du liquide.
● Audio-visuelles Material kann Urheberrechte umfassen, die ohne Genehmigung des Eigentümers dieser Urheberrechte nicht aufgenommen werden dürfen. Siehe die entsprechenden nationalen Gesetze. Dieses Produkt ist ein Laserprodukt der Klasse 1. Ce produit est classifié comme étant un LASER DE CLASSE 1. Este producto está clasificado como un PRODUCTO LÁSER DE CLASE 1.
● VORSICHT Verwendung von Regelungen oder Einstellungen bzw. Durchführung von anderen Verfahren als die hierin angegebenen kann zum Aussetzen gefährlicher Strahlung führen. Da der in diesem Compact Disc Player verwendete Laserstrahl für die Augen schädlich ist, ist das Gehäuse unter keinen Umständen zu zerlegen. Wenden Sie sich für Wartungsarbeiten nur an berechtigten Fachhändler.
Eigenschaften der Laserdiode Material: GaAIAs Wellenlänge: 780 nm Emissionsdauer: kontinuierlich Laser-Ausgang: max. 0,6 mW Caractéristiques de la diode laser Matière: GaAIAs Longueur d’onde: 780 nm Durée d’émission: ininterrompue Puissance de sortie laser maximale: 0,6 mW Características del diodo láser Material: GaAIAs Longitud de onda: 780 nm Duración de emisión : continua Salida de láser: máx.
ENGLISH Contents CD-XP200H ENGLISH Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5 Remote control . . . . . . . . . . . . .
Precautions CD-XP200H ENGLISH ! General ! Volume control " Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the equipment. The sound level at a given volume setting depends on speaker efficiency, location, and various other factors.It is advisable to avoid exposure to high volume levels, to avoid this do not turn the volume on to full at switch on and listen to music at moderate levels.
CD-XP200H Controls and indicators ENGLISH ! Front panel Reference page - Controls and indicators - General Information 1 2 3 7 8 9 10 11 12 13 14 15 4 5 6 16 18 19 20 21 17 1. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 2. Timer Set Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 3. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 4.
CD-XP200H ENGLISH 2 3 4 5 6 7 8 9 12 10 11 13 14 15 16 17 3 ! Rear panel 4 5 6 1 1. CD Pause Indicator 2. Extra Bass Indicator 3. Disc Number Indicators 4. Tape 2 Record Indicator 5. FM Stereo Mode Indicator 6. FM Stereo Receiving Indicator 7. Timer Play Indicator 8. Sleep Indicator 9. Timer Recording Indicator 10.CD Play Indicator 11.CD Repeat Play Indicator 12.RDS Indicator 13.Tape Play Indicator 14.Dynamic PTY Indicator 15.Traffic Programme Indicator 16.Traffic Announcement Indicator 17.
CD-XP200H Controls and indicators (continued) ENGLISH ! Remote control Reference page 1 2 13 4 - Controls and indicators - General Information 3 12 E-5 5 6 7 8 9 14 15 16 17 18 10 19 11 20 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 2. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 3. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . .11, 13, 17 4.
Remote control CD-XP200H ENGLISH ! Battery installation ! Test of the remote control 1 Open the battery cover. 2 Insert the batteries according to the direction indicated in the battery compartment. Check the remote control after checking all connections have been made correctly. (See pages 7 - 8.) Point the remote control directly at the remote sensor on the unit. When inserting or removing the batteries, push them towards the nals. battery termi- 3 Close the battery cover.
CD-XP200H System connections ENGLISH ! Aerial connection FM aerial Supplied FM aerial: AM loop aerial Right speaker Transport screw Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received. Left speaker Supplied AM loop aerial: Note: Placing the aerial on the stereo system or near the AC power lead may cause noise pickup. Place the aerial away from the stereo system for better reception.
CD-XP200H ENGLISH ! Speaker connection ! Connecting the AC power lead Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal. After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will enter the demonstration mode. Right speaker Left speaker Notes: " The unit will start the tape initialisation when plugged in to the AC socket.
CD-XP200H Sound control ENGLISH ! Extra bass (X-BASS)/Pre-programmed equaliser (Main unit operation) You can select the extra bass and pre-programmed equaliser modes with the same button on the main unit. Changing the mode: - Sound control - Basic Operation When the EQUALIZER/X-BASS/DEMO button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER/X-BASS/ DEMO button repeatedly until the desired sound mode appears.
Setting the clock CD-XP200H ENGLISH 4 Press the TUNING/TIME ( or ) button to adjust the hour and then press the MEMORY/SET button. " Press the TUNING/TIME ( or ) button once to advance the time by 1 hour. Hold it down to advance continuously. " When the 12-hour display is selected, "AM" will change automatically to "PM". In this example, the clock is set for the 24-hour (0:00) display. 1 2 Press the ON/STAND-BY button to turn the power on.
CD-XP200H Listening to a CD (CDs) ENGLISH This system can also play audio CD-R and CD-RW discs, but cannot record. Some audio CD-R and CD-RW discs may not be playable due to the state of disc or the device that was used for recording. 5 Press the OPEN/CLOSE button to close the disc tray. CD Playback - Listening to a CD (CDs) - Total number of tracks on the CD whose number is flashing 1 2 3 4 6 To select the CD you want to listen to first, press one of buttons on the remote control.
CD-XP200H ENGLISH " To locate the beginning of a track To move to the beginning of the next track: Press the / button for less than 0.5 seconds during playback. / button repeatedly until the de! You can skip to any track by pressing the sired track number appears. To restart the track being played: " Starting playback with a desired track You can play a disc starting with the desired track.
CD-XP200H Listening to a CD (CDs) (continued) ENGLISH " Repeat play " Programmed play All tracks on up to 3 discs, or a programmed sequence can be continuously repeated. You can choose up to 32 selections for playback in the order you like. To repeat all tracks on up to 3 discs: Press the / ( 1 Whilst in the stop mode, press one of the 1 - 3 buttons on the remote control to select the desired disc. 2 Press the / or / select the desired track. ) button twice.
Listening to the radio CD-XP200H ENGLISH " Tuning 1 2 Press the ON/STAND-BY button to turn the power on. 3 Press the TUNING/TIME ( station. Manual tuning: Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). or ) button to tune in to the desired Press the TUNING/TIME button as many times as required to tune in to the desired station. When the TUNING/TIME button is pressed for more than 0.
CD-XP200H Listening to the radio (continued) ENGLISH " Memorising a station " To recall a memorised station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) 1 2 Radio - Listening to the radio - 3 Press the MEMORY/SET button to enter the preset tuning saving mode. ) button for less than 0.5 seconds to select Within 30 seconds, press the PRESET ( preset channel number.
Listening to a cassette tape (TAPE 1 or TAPE 2) CD-XP200H ENGLISH Playback is possible in TAPE 1 compartment as well as in TAPE 2. Press the ON/STAND-BY button to turn the power on. 3 Load a cassette into the TAPE 1 or TAPE 2 cassette compartment with the side to be played facing toward you. Open the cassette door by pushing the area marked " EJECT". TAPE 1 4 Press the TAPE (1 listen to. 5 Press the / ( PUSH TAPE 2 2) button to select the cassette you want to ) button to start playback.
CD-XP200H Recording to a cassette tape ENGLISH Before recording: ! When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. ! SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. ! The volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor). ! For recording, use only normal tapes. Do not use metal or CrO tapes.
CD-XP200H ENGLISH " Recording from the radio You can record from TAPE 1 to TAPE 2. Tune in to the desired station. (See page 14.) Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you. 1 2 Wind past the leader of the tape, on which recording cannot be performed. Press the REC PAUSE (TAPE-2 button. ) It is recommended that the recording tape is the same length as the master tape. Recording will be paused. 4 Press the cording.
CD-XP200H Using the Radio Data System (RDS) ENGLISH RDS is a broadcasting service which a growing number of FM stations provide. These FM stations send additional signals along with their regular programme signals. They send their station names, and information about the type of programme such as sports or music, etc. When tuned to an RDS station, "RDS" and the station name will be displayed.
CD-XP200H AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M EASY M LIGHT M CLASSICS OTHER M WEATHER FINANCE CHILDREN Short accounts of facts, events and publicly expressed views, reportage and actuality. Topical programme expanding or enlarging upon the news, generally in different presentation style or concept, including debate, or analysis. Programmes whose purpose is to impart advice in the widest sense. Programme concerned with any aspect of sport.
CD-XP200H Using the Radio Data System (RDS) (continued) ENGLISH ! Using the Auto Station Programme Memory (ASPM) To stop the ASPM operation before it is complete: Whilst in the ASPM operation mode, the tuner will automatically search for new RDS stations. Up to 40 stations can be stored. If you have already stored some stations in memory, the number of new stations you can store will be less.
CD-XP200H ENGLISH ! To recall stations in memory Notes: To specify programmed types and select stations (PTY search): You can search a station by specifying the programme type (news, sports, traffic programme, etc. ... see page 20) from the stations in memory. 1 Press the TUNER (BAND) button to select the FM. " If the display has stopped flashing, start again from step 2.
CD-XP200H Timer and sleep operation ENGLISH Timer playback: The unit turns on and plays the desired source (CD, tuner, tape) at the preset time. ! Timer playback or timer recording Before setting timer: Timer recording: The unit turns on and starts recording from the tuner at the preset time. 1 Press the CLOCK button to check that the clock is on time. 2 For timer playback: Load a cassette or discs to be played. For timer recording: Load a cassette for recording in the TAPE 2 cassette compartment.
CD-XP200H ENGLISH 6 7 Press the TUNING/TIME ( or ) button to specify the minutes, then press the MEMORY/SET button. ! Sleep operation 1 2 Play back the desired sound source. Press the TIMER/SLEEP button repeatedly until "SLEEP" is displayed. The unit will enter the timer stand-by mode automatically. Press the ON/STAND-BY button to turn the power on. 8 When the preset time is reached, playback or recording will start.
CD-XP200H Enhancing your system ENGLISH The connection lead is not included. Purchase a commercially available lead as shown below. ! Listening to the playback sounds from VCR, DVD, etc. VCR, DVD, etc. 1 To the line output sockets Red When using video equipment, connect the audio output to this unit and the video output to a television. 2 3 4 Press the ON/STAND-BY button to turn the power on. Press the VIDEO/AUX button. Play the connected equipment.
Troubleshooting chart Symptom " The clock is not on time. Possible cause " Did a power failure occur? Reset the clock. (Refer to page 10.) " When a button is pressed, the unit " Set this unit to the power stand-by mode does not respond. and then turn it back on. " If the unit still malfunctions, reset it. (Refer to page 27.) " No sound is heard. Symptom " Cannot record. " Cannot record tracks with proper sound quality.
CD-XP200H Troubleshooting chart (continued) Maintenance ! If trouble occurs ! Cleaning the tape-handling parts ENGLISH When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again.
Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. CD-XP200H ENGLISH ! Tuner Frequency range FM: 87.
SHARP CORPORATION 9906 TINSZ0801AWZZ 02C R HK 01/11/28 Downloaded From Disc-Player.com Sharp Manuals CD-XP200H(H)_BACK.
DOWN UP CD-XP200H Downloaded From Disc-Player.
