Specifications

PROCEDURE FOR LOADING UTILITY PROGRAM

Load the programs stored on the floppy disk into the computer according to the

following procedure.

(1) First, turn off the power of the PC-1600 and then connect the PC-1600, CE-1600P

and CE-1600F.

(2) Turn on the power of the PC-1600, and when the prompt symbol ,, >,, is displayed,

insert the floppy disk on which the programs are stored into the CE-1600F. lnsert

with side A facing upwards.

(3) Load the applicable program. The loading procedure will differ, depending on the

program to be loaded, as explained below.

(3) Files 7 and 8-13 are loaded by using file programs 1-6. (Refer to page 9.)

(4) Files 7 and 8-13 are loaded directly. (Refer to page 10.)