OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D’EMPLOI PC LINK SYSTEM FOR EL-9900 PC-LINK-SYSTEM FÜR EL-9900 SYSTÈME PC LINK POUR EL-9900 For WINDOWS Für WINDOWS Pour WINDOWS ENGLISH ..................... Page 1 DEUTSCH .................... Seite 22 FRANÇAIS ...................
ENGLISH PC LINK SYSTEM FOR EL-9900 OPERATION MANUAL IBM is a registered trademark of International Business Machines Corporation. Windows and Microsoft Word are registered trademarks of Microsoft Corporation. All company and/or product names as trademarks and/or registered trademarks of their respective holders.
< INTRODUCTION > Thank you for your purchase. This product is supplied to customers who agree to the following items; please read them before using this product. We shall determine that you’ve approved them at setting up this product’s software. Terms of Use Sharp Corporation (hereinafter called “our Company”) shall grant a nonexclusive right of this product “CE-LK2” upon the following terms to you. You shall agree to the following terms at setting up this product’s software.
CONTENTS ♦ GETTING STARTED .............................................................................................. 4 What is PC LINK? ............................................................................................ 4 Checking the Accessories ............................................................................... 4 System Requirements ..................................................................................... 5 Setting Up PC LINK ..........................................
GETTING STARTED What is PC LINK? • • • • • • • • Creates and edits EL-9900 programs on a PC. Receives and saves programs and various data from EL-9900 Makes a backup of all the contents of memory of EL-9900. Sends programs and various data to EL-9900. Loads image data of EL-9900. Screen capture on Microsoft Word® sheet Converts programs and various data files into a text file. Converts program text files into a program file. Prints out programs and various data files.
System Requirements • • • • • • • • • 100% IBM Compatible PC Microsoft® Windows® 98/98 Second Edition/2000 Professional/Me/XP Pentium® 150MHz or higher for Microsoft® Windows® 98/98 Second Edition Pentium® 200MHz or higher for Microsoft® Windows® 2000 Professional/Me Pentium®/Celeron® Family 300MHz or higher for Microsoft® Windows® XP 30MB Available Hard Disk Space 64MB RAM for Microsoft® Windows® 98/98 Second Edition/2000 Professional/Me 128MB RAM for Microsoft® Windows® XP CD-ROM drive 1 Available Seria
Connecting the EL-9900 to the PC Connect the EL-9900 to the PC with the supplied communication cable. NOTE: Push in all connectors firmly and make sure they cannot be removed by pulling them lightly. Also tighten the fixing screws. 1. Turn off the EL-9900 and the PC. 2. Connect on side of the supplied communication cable to the peripheral connecting terminal (communication port) on the bottom of the EL-9900; the other side to the serial port of your PC.
USING PC LINK Files PC LINK can Handle PC LINK can handle the following files listed below. Contents of File File Name on PC Extension EL-9900 EL-9400 EL-9450 EL-96xx Backup backup g4b g3b g5b g2b Group Set arbitrarily.
Starting and Exiting PC LINK 1 Starting the PC LINK Select Start → Programs → SHARP PC-LINK for EL-9900 → SHARP CE-LK2 to start the PC LINK. The menu bar and the icons are displayed on the top of the window. 2 Exiting the PC LINK Select the Exit from the File menu, or double-click on the CLOSE box at the uppermost-left corner on the screen. Note: If a communication will not be available, check the settings of the communication (COM) port and the cable connection.
Sending, Receiving, and Backup Programs and Various Data (1) Programs and various data can be received from the EL-9900 in order to save them in a file. The contents saved in the file can also be sent to the EL-9900. (2) Back up all data of the EL-9900 to the file. Also, restore the backup data to the EL-9900. 1 Setting a Communication Port Set a communication port. Set the communication port where the communication cable for the PC is connected. 1. Select the Communication Port from the Link menu.
(2) Sending a File to the EL-9900 NOTE: Group files, Text files, TIFF files, and Bitmap files cannot be sent to the EL-9900. 1. Turn on the EL-9900. 2. Select the Send... from the Link menu. The Send Files screen is displayed. 3. Specify the kind of drive, folder, and file, then select the file to be sent from the file list, and click on the Select button. The selected file is displayed on the File Selected column. 4. Click on the OK button.
Opening a Saved File First, display (open) the contents of a file in order to print and edit the contents of the saved file. 1 Displaying the Contents of a File NOTE: The contents of Backup files, Group files, GDB files, Graph equation files, Solver equation files, and TIFF files cannot be displayed. (The files cannot be opened.) 1. Select the Open... from the File menu. The Open File screen is displayed. 2.
Using Edit Functions NOTE: The files that can be edited with the Edit functions are: List files, List DB files, Matrix files, Program files, Table setup files, Window setup files, Data variable files and Zoom files. The Edit functions are used for creating EL-9900 programs and editing the contents that have already been saved as files. 1 Entering Commands, Strings, and Values on the Edit Screen On the Edit screen, the following three ways can be used to enter commands, strings, and values.
(2) Entering from the Func Table The Func Table is used to select necessary items from the list containing items such as functions, and enter them. 1. Select the item from the major category of the Func Table menu. Selecting the Key Pad and Func All displays the subcategory. Selecting other than the Key Pad and Func All displays the subcategory and minor category, respectively. 2. Perform either of the following operations, and then enter an item in the cursor position on the Edit screen.
(4)Pasting the contents of a clipboard to the Edit Screen The contents moved to the clipboard by “Cutting a string” and “Copying a string” can be pasted at the cursor position on the Edit screen. * Selecting the Paste from the Edit menu pastes the contents of the clipboard at the cursor position on the Edit screen. (5)Finding a string 1. Select the Find... from the Edit menu. The Find screen is displayed. 2. Enter the string to be searched for.
Saving and Printing the Contents of the Edit Screen 1 Overwriting NOTE: Program files can be overwritten. • After completing edition, select the Save from the File menu. The file is saved in the same file. 2 Save As NOTES: • List files, List DB files, Matrix files, Table setup files, Window setup files, Data variable files, and Zoom files which are edited with the Edit functions, can be saved only as text files. When a file is saved as a text file, letters are included in @s for special symbols.
Screen Capture The screen capture function loads image data displayed on the EL-9900 on the PC. 1 Setting a Communication Port Perform the same procedure as in step 1 or from “1 Setting a Communication Port” on page 9, and then set the communication port. 2 Loading Image Data Load image data displayed on the EL-9900. 1. Display the contents to be loaded on the EL-9900 display. 2. Select the Screen Capture from the Link menu. The Load screen is displayed to load image data. 3.
Screen Capture on Microsoft Word® Sheet Installing the "EL-9900 Screen Capture Tool" enables you to directly capture and insert the image from the EL-9900 to the Microsoft Word® document. 1 Setting the Communication Port 1. Make sure that your PC and EL-9900 are connected with the supplied communication cable. 2. Start Microsoft Word®, and select Communication Port from EL-9900 menu on the menu bar. Communication Port Setting Dialog will open. 3. Select the port you wish to use or select Auto and click OK.
Group/Ungroup 1 Group (Combine individual files into a group file) It is possible to create a group file either by combining unrelated individual files or by combining only related files. 1. Select the Group Files... from the Tools menu. The file selection screen to choose which files to combine into a group file is displayed. 2. Specify drive, directory and the file type. Select the file to group from the file list and then click the Select button.
Converting a File 1 Converting a Program and Various Data Files into a Text File NOTE: The following files can be converted to text files: List files, List DB files, Matrix files, Program files, Table setup files, Window setup files, Data variable files, and Zoom files. For conversion to a text file, letters are included in @s for special symbols. (For details on special symbols, see the “Table for Converting Special Symbols into TXT Letters” on page 20.) 1.
APPENDIX Table for Converting Special Symbols into TXT Letters Upon conversion to TXT, the letter is included in @s. (@ ... @) Letter 0 1 2 3 4 5 6 7 8 9 a b c d e r R g n E (-) ° r i ∠ θ T π p̂ _ x _ y ≠ TXT conversion 0 1 2 3 4 5 6 7 8 9 a b c d e r R grad n EE deg rad i complex_angle theta T pi p_hat x_mean y_mean not_= The letter in the part 20 is bold. Letter ≥ ≤ × P C 2 –1 3 ⇒ 10 Σ ∫ N σ χ F + .
How to Proceed in the Event of Abnormal Conditions If this product is exposed to a powerful external electric field or shock during use, an abnormal condition may seldom occur in which all of the keys, including the ON key on the calculator connected, do not function. In the event of such a situation operate the machine from the start again, or reset the calculator by the following procedure before reoperation. Refer to the EL-9900 Operation manual. How to reset 1.
DEUTSCH PC-LINK-SYSTEM FÜR EL-9900 BEDIENUNGSANLEITUNG IBM ist ein eingetragenes Warenzeichen der International Business Machines Corporation. Windows und Microsoft Word sind eingetragene Warenzeichen der Microsoft Corporation. Alle aufgeführten Firmen- und/oder Produktnamen sind Warenzeichen oder eingetragene Warenzeichen der jeweiligen Eigentümer.
< EINLEITUNG > Vielen Dank, dass Sie sich für dieses Erzeugnis entschlossen haben. Bitte lesen Sie diese Anleitung vor der Ingebrauchnahme. Mit Installation der Software gelten die Bedingungen als angenommen. Der Gebrauch dieses Erzeugnisses setzt das Einverständnis mit den unten aufgeführten Bedingungen voraus. Bedingungen für den Gebrauch Sharp Corporation (nachfolgend “unsere Firma” genannt) gewährt Ihnen zu den folgenden Bedingungen nichtexklusive Rechte für dieses Erzeugnis “CE-LK2”.
INHALT ♦ VORBEREITUNGEN ............................................................................................ 25 Was ist PC-LINK? .......................................................................................... 25 Überprüfen des Zubehörs .............................................................................. 25 Systemanforderungen ................................................................................... 26 Einrichten von PC-LINK .............................................
VORBEREITUNGEN Was ist PC-LINK? • • • • • • • • Erstellt und editiert Programme für den EL-9900 auf einem PC. Empfängt und speichert Programme und Daten vom EL-9900. Erstellt eine Sicherungsdatei mit dem gesamten Speicherinhalt des EL-9900. Überträgt Programme und Daten zum EL-9900. Lädt Bilddaten vom EL-9900. Fenster-Einfangfunktion mit Microsoft Word® Sheet Konvertiert Programme und Datendateien in Textdateien. Konvertiert Programm-Textdateien in Programmdateien. Druckt Programme und Dateien.
Systemanforderungen • • • • • • • • • 100% IBM-kompatibler PC Microsoft® Windows® 98/98 Second Edition/2000 Professional/Me/XP Pentium® 150 MHz oder höher für Microsoft® Windows® 98/98 Second Edition Pentium® 200 MHz oder höher für Microsoft® Windows® 2000 Professional/Me Pentium®/Celeron® Family 300 MHz oder höher für Microsoft® Windows® XP 30 MB freier Festplatten-Speicherplatz 64 MB RAM für Microsoft® Windows® 98/98 Second Edition/2000 Professional/Me 128 MB RAM für Microsoft® Windows® XP CD-ROM-Laufwe
Anschluss des EL-9900 an den PC Den EL-9900 mit dem mitgelieferten Kommunikationskabel am PC anschliessen. HINWEIS: Alle Steckverbinder fest einstecken und sicherstellen, dass sie sich bei leichtem Zug daran nicht lösen. Auch alle Befestigungsschrauben festziehen. 1. EL-9900 und PC ausschalten. 2.
GEBRAUCH VON PC-LINK Mit PC-LINK kompatible Dateiformate PC-LINK kann mit folgenden Dateiformaten arbeiten: Dateiinhalt Name der PC-Datei Erweiterung EL-9900 EL-9400 EL-9450 EL-96xx Backup backup g4b g3b g5b g2b Gruppen Beliebig (Ausgangswert: Group) g4g g3g g5g g2g Grafikdaten g_data1 bis g_data9, g_data0 g4d g3d g5d g2d Grafikgleichungen y1 bis y9, y0/x1t bis x6t/y1t bis y6t/ g4y g3y g5y g2y r1 to r6 / u / v / w ← nur für EL-96xx/ 9900 SOLVER-Gleichungen Gleicher Dateiname wie
Starten und Beenden von PC-LINK 1 Starten von PC-LINK Zum Starten von PC-LINK wählen Sie Start → Programme → SHARP PC-LINK for EL-9900 → SHARP CE-LK2. Der Menübalken und die Symbole werden oben auf der Anzeige dargestellt. 2 Beenden von PC-LINK Im File-Menu Exit wählen oder das Programm durch Doppelklick auf das Symbol CLOSE links oben auf dem Bildschirm schliesen. Hinweis: Falls keine Kommunikation nde kommt, überprüfen Sie die Einstellung für den Datenanschluss (COM) und den Anschluss des Kabels.
Übertragen, Empfangen und Sichern von Programmen und Daten (1) Es können Programme und Daten vom EL-9900 empfangen werden, um sie in einer Datei zu speichern. Der in der Datei gespeicherte Inhalt kann wiederum zum EL-9900 zurückubertragen werden. (2) Sämtliche Daten des EL-9900 können in einer Datei gesichert werden. Die in der Sicherungsdatei gespeicherten Daten können wiederhergestellt und zum EL9900 übertragen werden.
(2)Übertragen einer Datei zum EL-9900 HINWEIS: Gruppen-, Text-, TIFF- und Bitmap-Dateien können nicht zum EL-9900 ubertragen werden. 1. Den EL-9900 einschalten. 2. Im Link-Menü Send... wählen. Das Fenster “Send Files” erscheint. 3. Laufwerk, Ordner und Datei angeben. Dann in der Dateiliste die zu übertragende Datei wählen und auf Select klicken. Die gewählte Datei erscheint in der Spalte “File Selected”. 4. Auf OK klicken. Das Fenster “Sending” erscheint auf dem PC-Bildschirm und die Übertragung beginnt.
Öffnen einer gespeicherten Datei Um den Inhalt einer gespeicherten Datei zu drucken oder zu editieren, mus dieser zunächst auf dem Bildschirm dargestellt (geöffnet) werden. 1 Darstellen des Dateiinhalts HINWEIS: Der Inhalt von Sicherungs-, Gruppen-, GDB-, Graph-Gleichungs-, SolverGleichungs- und TIFF-Dateien kann nicht dargestellt werden. (Die Dateien lassen sich nicht öffnen.) 1. Im File-Menü Open... wählen. Das Fenster “Open File” erscheint. 2. Laufwerk, Ordner und Datei angeben.
Gebrauch der Editierfunktionen HINWEIS: Folgende Dateien können mit den Editierfunktionen bearbeitet werden: Listendateien, Listendaten-Dateien, Matrixdateien, Programmdateien, Tabellendateien “, Fensterdateien “, Datenvariablen-Dateien und ZoomDateien. Die Editierfunktionen dienen zum Erstellen neuer Programme für den EL-9900 sowie zum Editieren von bereits als Dateien gespeicherten Programmen.
(2)Eingabe über die Funktionstabelle Die Funktionstabelle besteht aus einer Liste von Posten, z.B. Funktionen, die durch Anklicken gewählt werden können. 1. In der Hauptkategorie des Func Table-Menüs einen Posten wählen. Bei Wahl von “Key Pad” und “Func All” wird die Unterkategorie dargestellt. Bei Wahl aller anderen Posten erscheint die Unter- bzw. Nebenkategorie. 2. Zum Eingeben eines Postens an der Cursorposition stehen zwei Verfahren zur Verfugung.
(4)Einfügen des Clipboardinhalts in das Editierfenster Zeichenfolgen, die mittels Ausschneiden oder Kopieren in das Clipboard gegeben worden sind, können an der Cursorposition in das Fenster “Edit” eingefügt werden. * Mit der Option Paste im Edit-Menü kann der Inhalt des Clipboards an der Cursorposition in das Fenster Edit eingefügt werden. (5)Suchen einer Zeichenfolge 1. Im Edit-Menü Find... wählen. Das Fenster “Find” erscheint. 2. Die zu suchende Zeichenfolge eingeben.
Speichern und Drucken des Editierfensterinhalts 1 Überschreiben HINWEIS: Programmdateien können uberschrieben werden. • Wenn die Editierung beendet ist, im File-Menü Save wählen. Die Datei wird unter demselben Dateinamen gespeichert. 2 Speichern unter einem anderen Dateinamen HINWEISE: • Listendateien, Listendaten-Dateien, Matrixdateien, Tabellendateien, Fensterdateien, Datenvariablen-Dateien und Zoom-Dateien, die mit den Editierfunktionen bearbeitet wurde, können nur als Textdateien gespeichert werden.
Fenster-Einfangfunktion Mit der Fenster-Einfangfunktion (Screen Capture) können auf dem EL-9900 dargestellte Bilddaten auf den PC-Bildschirm geladen werden. 1 Festlegen des Datenanschlusses Wie oben bei Schritt 1 vorgehen oder wie bei “1 Festlegen des Datenanschlusses” auf Seite 30; dann den Datenanschluss festlegen. 2 Laden von Bilddaten Auf dem EL-9900 dargestellte Bilddaten können in den PC geladen werden. 1. Den zu ladenden Bildschirminhalt auf dem EL-9900 darstellen. 2.
Fenster-Einfangfunktion mit Microsoft Word® Sheet Durch die Installation des “EL-9900 Screen Capture Tool” können Sie ein Bild vom EL-9900 direkt einfangen und in ein Dokument von Microsoft Word® einfügen. 1 Festlegen des Datenanschlusses 1. Sicherstellen, dass der PC und der EL-9900 mit dem mitgelieferten Kommunikationskabel verbunden sind. 2. Microsoft Word® starten und Communication Port aus dem Menü des EL-9900 wählen. Das Fenster “Communication Port Setting” wird geöffnet. 3.
Gruppieren/Entgruppieren 1 Gruppieren (Sammeln einzelner Dateien in einer Gruppendatei) Eine Gruppendatei kann erstellt werden, indem einzelne unverwandte oder ausschlieslich verwandte Dateien zu einer Datei zusammengefast werden. 1. Im Tools-Menü Group Files... wählen. Das Fenster “File Selection” zum Auswählen der zu gruppierenden Dateien erscheint. 2. Laufwerk, Verzeichnis und Dateiart angeben. Eine zu gruppierende Datei in der Dateienliste wählen und auf Select klicken.
Konvertieren einer Datei 1 Konvertieren von Programmen und Dateien in Textdateien HINWEIS: Folgende Dateien können in Textdateien konvertiert werden: Listendateien, Listendaten-Dateien, Matrixdateien, Programmdateien, Tabellendateien “, Fensterdateien “, Datenvariablen-Dateien und Zoom-Dateien. Wenn eine Datei als Textdatei konvertiert wird, werden bei @s Buchstaben für Sonderzeichen eingefügt.
ANHANG Konvertierung von Sondersymbolen in TXT-Zeichen Bei der TXT-Konvertierung werden die für Sondersymbole gesetzten Zeichen in zwei @-Zeichen eingeschlossen (@ ... @). Zeichen 0 1 2 3 4 5 6 7 8 9 a b c d e r R g n E (-) ° r i ∠ θ T π p̂ _ x _ y ≠ TXT-Konvertierung 0 1 2 3 4 5 6 7 8 9 a b c d e r R grad n EE deg rad i complex_angle theta T pi p_hat x_mean y_mean not_= Zeichen im Bereich Zeichen ≥ ≤ × P C 2 –1 3 ⇒ 10 Σ ∫ N σ χ F + .
Vorgehensweise bei einer Störung Wenn das Erzeugnis einem starken elektrischen Feld oder starken Erschütterungen ausgesetzt wird, kann sich in seltenen Fällen ein Störzustand einstellen, in dem keine der Tasten funktioniert, einschliesslich der ON -Taste des angeschlossenen Rechners. Dieser Zustand kann durch Neustarten des Computers oder Rückstellen des Rechners beseitigt werden. Siehe die Bedienungsanleitung des EL-9900. Rückstellen 1.
FRANÇAIS SYSTÈME PC LINK POUR EL-9900 MODE D’EMPLOI IBM est une marque déposée par International Business Machines Corporation. Windows et Microsoft Word sont des marques déposées par Microsoft Corporation. Les noms de société et les noms de produits sont des marques qui peuvent avoir fait l'objet d'un dépôt par leur propriétaire.
< INTRODUCTION > Nous vous remercions d’avoir choisi ce produit. Il vous est foumi dans la mesure où vous acceptez les termes et conditions suivants; veuillez en prendre connaissance avant d»employer le produit. Nous estimerons que vous avez donné votre accord sur les termes et conditions dès lors que vous procéderez à la mise en oeuvre du logiciel qui accompagne le produit.
TABLE DES MATIÈRES ♦ POUR COMMENCER .......................................................................................... 46 Quelles fonctions sont assurées par PC LINK? ............................................. 46 Vérification des accessoires fournis .............................................................. 46 Exigences système ........................................................................................ 47 Mise en oeuvre de PC LINK .................................................
POUR COMMENCER Quelles fonctions sont assurées par PC LINK? • • • • • • • • Création et révision sur ordinateur personnel de programmes pour les appareils EL-9900. Réception et sauvegarde de programmes et données provenant des appareils EL-9900. Copie de secours de tout le contenu de la mémoire des appareils EL-9900. Émission de programmes et données vers les appareils EL-9900. Chargement des données image des appareils EL-9900.
Exigences système • • • • • • • • • Ordinateur personnel 100% compatible IBM PC Microsoft® Windows® 98/98 deuxième édition/2000 Professional/Me/XP Pentium® 150 MHz ou mieux pour Microsoft® Windows® 98/98 deuxième édition Pentium® 200 MHz ou mieux pour Microsoft® Windows® 2000 Professional/Me Pentium® ou Celeron® 300 MHz ou mieux pour Microsoft® Windows® XP 30 Mo disponibles sur le disque dur 64 Mo de mémoire vive pour Microsoft® Windows® 98/98 deuxième édition/2000 Professional/Me/XP 128 Mo de mémoire vi
Raccordement des appareils EL-9900 à un ordinateur personnel Reliez la calculatrice EL-9900 à l'ordinateur personnel au moyen du câble de liaison fourni. REMARQUE: Enfoncez soigneusement tous les connecteurs et assurez-vous qu'ils ne puissent pas être débranchés en les tirant légèrement. Serrez également les vis de fixation 1. Mettez hors tension la calculatrice EL-9900 et l'ordinateur personnel. 2.
UTILISATION DE PC LINK Fichiers que PC LINK peut traiter PC LINK est en mesure de traiter les fichiers figurant dans le tableau ci-dessous.
Démarrage et abandon de PC LINK 1 Démarrage de PC LINK Cliquez sur Démarrer → Programmes → SHARP PC-LINK for EL-9900 → SHARP CE-LK2 pour lancer PC LINK. La barre de menu et les icônes s'affichent à la partie supérieure de la fenêtre. 2 Abandon de PC LINK Choisissez l’option Exit que vous propose le menu File, ou bien cliquez deux fois sur le bouton CLOSE qui se trouve dans le coin supérieur gauche.
Émission, réception et copie de secours des programmes et données (1) Les programmes et les données provenant des appareils EL-9900 peuvent être sauvegardés sous forme de fichier. Inversement, le contenu d’un fichier peut être adressé aux appareils EL-9900. (2) Les données que contiennent les appareils EL-9900 peuvent être sauvegardées sous la forme d’un fichier. Pareillement, le fichier peut être chargé dans les appareils EL-9900.
* Si le fichier Résolution d’équation et le fichier Programme sont enregistrés sous le même nom dans EL-9900, seul le premier enregistrement est accessible. Si vous désirez accéder à tous les fichiers, veuillez enregistrer chaque fichier sous un nom différent dans EL-9900. (2) Émission d’un fichier vers les appareils EL-9900 REMARQUE: Les fichiers groupés, les fichiers texte, les fichiers TIFF et les fichiers adressés par point ne peuvent pas être émis vers les appareils EL-9900. 1.
Ouverture d’un fichier après sauvegarde Vous désirez afficher le contenu du fichier (ouvrir le fichier) afin de l’imprimer ou de le réviser. 1 Affichage du contenu d’un fichier REMARQUE: Les fichiers de secours, les fichiers GDB, les fichiers de équation graphique, les fichiers de résolution d’équation et les fichiers TIFF, ne peuvent pas être affichés. (Autrement dit, ces fichiers ne peuvent pas être ouverts.) 1. Choisissez l’option Open... que vous propose le menu File. La page “Open File” s’affiche. 2.
Utilisation des fonctions de révision REMARQUE: Les fichiers que vous pouvez réviser au moyen des fonctions prévues à cet effet sont: les fichiers de listes, les fichiers de base de données de liste, les fichiers de matrices, les fichiers de programmes, les fichiers de configuration de tableau, les fichiers de configuration de fenêtre, les fichiers de variables de données et les fichiers zoom.
1. Sur le menu Func Table choisissez un poste de la liste principale. Si vous choisissez Key Pad et Func All, vous obtenez l’affichage d’une liste secondaire. Si vous choisissez autre chose que Key Pad et Func All, vous obtenez l’affichage d’une liste secondaire ou d’une liste tertiaire, respectivement. 2. Effectuez l’une des opérations suivantes pour introduire, sur la page de révision et à l’emplacement qu’occupe le curseur, le paramètre ou la fonction choisis sur une liste.
(4)Coller sur la page de révision ce qui est sous le presse-papiers Ce que vous avez rangé sous le presse-papiers, soit par l’opération “Découper une chaîne de caractères”, soit par l’opération “Copier une chaîne de caractères”, peut être collé sur la page de révision à l’emplacement qu’occupe le curseur. * Choisissez l’option Paste du menu Edit pour coller à l’emplacement qu’occupe le curseur sur la page de révision, ce que vous avez rangé sous le presse-papiers. (5)Rechercher une chaîne de caractères 1.
Sauvegarde et impression du contenu de la page de révision 1 Sauvegarde sous le même nom REMARQUE: Les fichiers programmes peuvent être écrasés. • Lorsque les révisions sont terminées, choisissez l’option Save que vous propose le menu File. Le fichier est sauvegardé sous le même nom.
Saisie d’écran La saisie d’écran permet de charger sur l’ordinateur personnel les données de l’image affichée sur les appareils EL-9900. 1 Choix d’un port de communication Procédez aux opérations de paragraphe “1 Choix d’un port de communication” de la page 51, en commençant par l’opération 1, de manière à choisir ce port. 2 Chargement des données image Chargez les données de l’image affichée sur les appareils EL-9900. 1. Affichez sur les appareils EL-9900, l’image à charger. 2.
Copie d'écran dans un fichier Microsoft Word® L'installation de "EL-9900 Screen Capture Tool" vous permet de copier directement l'image de la calculatrice EL-9900 dans un fichier Microsoft Word®. 1 Définition du port de communication 1. Assurez-vous que l'ordinateur personnel et la calculatrice EL-9900 sont reliés par le câble de liaison fourni. 2. Démarrez Microsoft Word® puis sélectionnez Communication Port sur la barre de menu de la calculatrice EL-9900.
Grouper et dégrouper des fichiers 1 Grouper (Fusionner plusieurs fichiers de manière à n’en former qu’un seul) Vous avez la possibilité de créer un fichier de groupe en associant des fichiers qui n’ont aucun point commun, ou bien en associant des fichiers qui ont un point commun. 1. Choisissez l’option Group Files... que vous propose le menu Tools. La page de sélectioin des fichiers à grouper, s’affiche. 2. Précisez le type de fichier, le répertoire et l’unité.
Conversion d’un fichier 1 Conversion d'un programme et de divers fichiers de données en un fichier texte REMARQUE: Les fichiers suivants sont convertis en fichiers textes: fichiers de liste, les fichiers de liste DB, les fichiers de matrices, les fichiers de table de configuration, les fichiers de configuration Windows, les fichiers de variable et les fichiers zoom. Lors de la conversion en fichier texte, les symboles spéciaux sont convertis avec @s.
ANNEXE Tableau de conversion des symboles spéciaux en caractères de fichier TXT Après conversion en fichier TXT, les caractères sont placés entre deux @ (@ ... @). Caractère 0 1 2 3 4 5 6 7 8 9 a b c d e r R g n E (-) ° r i ∠ θ T π p̂ _ x _ y ≠ Conversion TXT 0 1 2 3 4 5 6 7 8 9 a b c d e r R grad n EE deg rad i complex_angle theta T pi p_hat x_mean y_mean not_= Caractère ≥ ≤ × P C 2 –1 3 ⇒ 10 Σ ∫ N σ χ F + .
En présence d’une situation anormale En cas d'exposition de l'appareil à un champ électrique puissant, ou encore à un choc, tandis qu'il est en fonctionnement, une anomalie peut se produire et parfois toutes les touches, y compris la touche ON de la calculatrice connectée, deviennent inopérantes. En ce cas, reprenez la mise en service de l'appareil depuis le début ou bien réinitialisez la calculatrice en procédant comme il est dit ci-dessous. Reportezvous au mode d'emploi de la calculatrice EL-9900.
MEMO/NOTIZEN/BLOC-NOTES 64
SHARP CORPORATION 02DGK (TINSL0532EHZZ) PRINTED IN CHINA/GEDRUCKT IN CHINA/IMPRIMÉ EN CHINE