Operating instructions

E-21

Setup & Connections

By connecting the OUTPUT terminal on the projector to the RGB terminal on a monitor using an RGB cable

(commercially available), you can display the computer image both on the projector and on the monitor.

1 Connect one end of the computer RGB cable (commercially available) to the RGB (analog) OUTPUT port on

the projector.

2 Connect the other end of the computer RGB cable to the RGB (analog) INPUT port on the monitor.

Connecting to a Monitor

2 To RGB input

terminal

• The image source from INPUT 1 or 2 can display using the OUTPUT terminal. This doesn’t apply to the image source from INPUT 3,4, or 5.

For Better Sound

Connecting to an amplifier and other audio components

To audio input terminals

Amplifier

CAUTION

• Always turn off the projector before connecting to audio

components, in order to protect both the projector and the

components being connected.

• By using external audio components, the volume can be amplified for better sound.

• The AUDIO OUTPUT terminal allow you to output audio to audio components from the selected AUDIO INPUT 1 to 5 terminals connected to

audiovisual equipment.

• For details on Variable Audio Output (VAO) and Fixed Audio Output (FAO), see page

• A ø3.5 mm stereo minijack to stereo RCA audio cable adaptor may be necessary.

Audio cable (commercially available)

RGB cable