LCD Projector Operation Manual

E-41
Basic Operation
Menu Bars
Items on the INPUT 1, 2 or 3 Mode Menu Bar
Main menu
Sub menu
Main menu
Sub menu
Picture Options
Options
Fine Sync
Audio
Tint Ⳮ30ⳮ30
Color Ⳮ30ⳮ30
Sharp Ⳮ30ⳮ30
Contrast Lamp 1
Lamp 2
Ⳮ30ⳮ30
Bright Ⳮ30ⳮ30
Red Ⳮ30ⳮ30
Blue
Reset
Ⳮ30ⳮ30
CLR Temp
Progressive Mode
Signal Type
Ⳮ3ⳮ3
Component
RGB
2D Progressive
3D Progressive
Film Mode
Auto Sync
Clock Ⳮ150ⳮ150
Ⳮ150ⳮ150
[ON/OFF]
Auto Sync Disp [ON/OFF]
Phase Ⳮ60ⳮ60
H-Pos
V-Pos
Reset
Save Setting
Select Setting
Special Modes
Ⳮ60ⳮ60
Signal Info
1
2
•
•
7
Resolution
800⳯600
640⳯480
1
2
•
•
7
Resolution
Vert Freq
75 Hz
72 Hz
1
2
•
•
7
Resolution
800⳯600
640⳯480
Vert Freq
75 Hz
72 Hz
Resolution
Hor Freq
Vert Freq
640⳯480
37.5 kHz
72 Hz
Economy Mode
OSD Display
Background
[ON/OFF]
[ON/OFF]
Auto Power Off
ID No. Display
MNTR Out/RS232C
[ON/OFF]
Startup Image
Treble Ⳮ30ⳮ30
Balance Ⳮ30ⳮ30
Bass Ⳮ30ⳮ30
Reset
Pict in Pict
Sharp
Sharp
Custom
Custom
Blue
None
None
Display Off
Standby Off
Display On
Normal
Level A
Level B
Lamp Timer
Lamp Mode
Both Lamps
Lamp 1 Only
Lamp 2 Only
Equal Use
PRJ Mode
Stack Setting
Keylock Level
Set Inputs
RS-232C
Set ID No.
Password
Optional Board
CeilingⳭFront
CeilingⳭRear
Front
Rear
Level B
Input 1
Input 2
Input 3
Input 4
Input 5
9600bps
115200bps
ID No.
Input 6
38400bps
Old Password
Reconfirm
New Password
Slave
Level A
Master
Normal
Normal
Language
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Status
[ON/OFF]
[ON/OFF]
[ON/OFF]
[ON/OFF]
[ON/OFF]
[ON/OFF]
• The resolution, vertical frequency and horizontal frequency figures displayed above are for example purposes only.
•“Color”, “Tint”, and “Sharp” appear only when Component input is selected in INPUT 1 or 2 mode. For INPUT 3 (DVI), in
“Picture” menu, only “CLR Temp” is active and the other menus are displayed in gray. In “Fine Sync” menu, only “Signal
Info” is active and the other menus are displayed in gray.
• Only the items highlighted in the tree charts above can be adjusted.
• To adjust the items under the sub menu, press © after selecting the sub menu.