Specifications

User-selectable
gain/peaking switch
15-pin HD male
laptop connector
15-pin HD female
display connector
Unit power
LED indicator
Signal presence
LED indicator
actual size shown
1
0
2
3
800.633.9876 • www.extron.com
EXTRON P/2 DA1
Extron’s P/2 DA1 (The Peaker) is an extremely small, one input, one buffered
output VGA/SVGA/XGA/SXGA line driver. Mobile presenters are often faced
with sub-optimal presentation systems. The Peaker can overcome many system
deficiencies such as poor cable quality, excessive lengths, poor connections,
crimped cables, and minor damage. This ensures your presentation gets where it
needs to go. The P/2 DA1 provides amplification and peaking, which allow a
computer-video signal to be run long distances (250 feet or more) and produce
brighter and sharper images than normally possible. This is especially useful in
the case of laptops, which often output a low power video signal. The P/2 DA1
is housed in a 15-pin HD adapter-sized enclosure, making it highly portable and
easy to connect to a laptop.
• High bandwidth: 300 MHz (-3dB) RGB video bandwidth provided.
• Compatible with VGA, SVGA, XGA, and SXGA graphic cards,
monitors, and projectors, as well as Macs with 15-pin HD output.
• Restores low level sync voltages found on many laptops (as low as two volts)
to normal TTL levels. This allows a laptop to function with displays and
cable types it normally wouldn’t work with.
• Three levels of user-selectable gain/peaking provided to maintain signal
integrity during long cable runs.
• The display’s ID bits are passed through to the laptop.
The P/2 DA1 (USA/domestic) part number is 60-319-01.
The P/2 DA1 (world) part number is 60-319-02.
For complete details, visit Extron’s website at
www.extron.com/e/p2da1
Extron’s new P/2 DA1 line driver provides the following advantages:
NEW
Make Your Presentation
Go the Distance