Installation guide

TIMER OPERATION
ON TIMER
[ne Press the ON TIMER button.
(ET « The time setting will change as you press the button
ep RUAOLE AIR CONDITIONER as follows. Hold the button down to speed through the
| «- a settings.
Crore On 1 Shepton oe Hine 12h
oe
=
« The orange TIMER lamp on the unit will light.
« The time setting will count down to show the remaining
time.
Select the mode, temperature, fan speed ‘setting and
PLASMACLUSTER operation. as. desired.
1 «When the temperature is set. with the ON TIMER, the
temperature. will show-in the display for 5 seconds. and
then return to the time. display.
«lf you'do-not:change the setting, the unit-will operate -us-
ing the.-most recent setting.
CANCEL
TO CANCEL TIMER
Press the CANCEL button.
« The orange TIMER lamp on the unit will turn off.
3 : COOL
@ © DEHUM
& : FAN
Se: VENT
OFF TIMER
(a Press the OFF TIMER button and set the time
(ry as desired.
eet cic eee * The time setting will change as you press the button
ek as follows. Hold the button down to speed through
the settings.
Cro Oh 1 5h--B1 Ohm 11h-B>1 an)
« The orange TIMER lamp on the unit will light.
« The time setting will count down to show the remain-
ing time.
TO CANCEL TIMER
1 Press the CANCEL button.
« The orange TIMER lamp on the unit will turn off.
CANCEL
NOTES
Timer duration can be set from a minimum of half an hour to a maximum of 12 hours.
Up to 9.5 hours, you can set in half-hour increments and from 10 to 12 hours, in 1-hour increments.
The latest time setting will be memorized and will appear on the remote control display the next time you
set the OFF TIMER or ON TIMER.
The OFF TIMER and ON TIMER can not be set together.
Only the most recent TIMER setting will be valid.
If a power failure occurs while the OFF TIMER or ON TIMER is set, the TIMER setting will be cancelled and
will not be retrieved even after the power is restored.
E-29