Specifications

E 16
Dimension: 176 x 250 mm
FLE (M) Sdn. Bhd
Channel setting
Enables individual channel setting.
1 Press
CH-SET
to call
CH-SETTING screen.
2 Press
CH
/
CH
to
select desired setting.
3 Each time you press
/
, setting for individual
items changes as follows:
CH-SETTING
POSITION CH27
COLOUR AUTO
SKIP OFF
FINE
168.25MHz
:ADJUST
:SELECT
CH
TV/VIDEO
TV
0
NORMAL
TIMERFEATURE
CH-SET
PICTURE
1
4
7
2
5
8
3
6
9
CH
CH
CH
CH
CH-SET
• Switching COLOUR system:
Set the system to “AUTO” for normal TV reception. The AUTO mode automatically detects the receiving
signal system and changes the reception system of the TV set. When the picture is not stable, switching to
an appropriate system may improve the picture quality.
• In a weak reception area, or under bad reception conditions, you can change the frequency by fine tuning.
• When using FINE, the channel number changes from green to yellow.
• To return the channel to its original frequency setting, follow the manual channel tuning procedure.
See
14
.
4 Press
CH-SET
to return to
normal screen.
• When you select AV1 or AV2 for the
channel position, the CH-SETTING
screen changes as shown on the
right and the colour mode changes
in the following order:
CH-SETTING
POSITION AV1
COLOUR AUTO
:ADJUST
:SELECT
CH
AUTO PAL N443 N358
• POSITION
The channel position changes to the higher or lower number.
• COLOUR
• SKIP
ON
OFF
Channel numbers with a “
” mark on the left are set to SKIP. To turn
off SKIP, press the number buttons to select the desired channel and
then set “SKIP” to “OFF”.
• FINE
The frequency changes to allow fine tuning.
AUTO PAL
CX51HF3(12-16)EN 5/10/04, 6:19 pm16