Owner manual

AR-5127 SIMULATION 8 - 29
Operation/procedure
Select the mode with the 10-key and press the [OK] key.
Enter the adjustment value with the 10-key and press the [OK] key, and
the entered value is registered.
Pressing the [BACK] key returns to the mode selection.
Auto exposure mode
• When SIM 26-6 (Destination setup) is changed from EX to Japan,
the setup value becomes 1 (Default: Japan). If, on the contrary, it is
changed from Japan to EX, the set value becomes 2 (Default: EX)
• If the auto exposure mode setup value is changed, the setup value
of SIM 46-30 (AE limit setup) is reset to the default value.
Operation/procedure
Select the mode with the 10-key and press the [OK] key.
Enter the adjustment value with the 10-key and press the [OK] key, and
the entered value is registered.
Pressing the [BACK] key returns to the mode selection.
Operation/procedure
Select the mode with the 10-key and press the [OK] key.
Enter the adjustment value with the 10-key and press the [OK] key, and
the entered value is registered.
Pressing the [BACK] key returns to the mode selection.
If SIM 26-6 (Destination setup) and SIM46-19 (Auto exposure mode)
are changed, this setup is also changed to the default value accord-
ingly.
Operation/procedure
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
46-19
Purpose Adjustment
Function
(Purpose)
Used to change the image quality in the exposure
mode.
Item Picture quality
(Initial screen) (Input screen)
Display items Content Default
1:AE MODE
(1:EXPOSURE
2:TONER)
Auto exposure mode
(1: Priority on Image quality,
2: Priority on toner consumption)
2
2:AE STOP(COPY)
(0:FIXED
1:REAL TIME)
Auto exposure STOP mode
(COPY)
(0: Fixed, 1: Real-time)
0
3:AE STOP(FAX)
(0:FIXED
1:REAL TIME)
Auto exposure STOP mode (FAX)
(0: Fixed, 1: Real-time)
0
4:AE STOP(SCAN)
(0:FIXED
1:REAL TIME)
Auto exposure STOP mode
(SCANNER)
(0: Fixed, 1: Real-time)
0
5:1200dpi PHOTO
(1:SOFT
2:HARD)
1200dpi photo mode
(Countermeasures for claims on
dither)
(1: Soft mode, 2: Hard mode)
Disabled
46-20
Purpose Adjustment
Function
(Purpose)
Used to correct SPF exposure.
Item Picture quality
(Initial screen) (Input screen)
Display items Content Setting range Default
1:SPF EXPOSURE
SPF 1-99 53
2:RSPF EXPOSURE
RSPF
Sim46-19 AE MODE
1:AE MODE 1
2:AE STOP(COPY) 0
3:AE STOP(FAX) 0
1/2 1
Sim46-19 AE MODE
1:AE MODE 1
(1:EXPOSURE
2:TONER)
[ 1- 2] 1
Sim46-20 SPF EXP.
1:SPF EXPOSURE 53
2:RSPF EXPOSURE 53
1
Sim46-20 SPF EXP.
1:SPF EXPOSURE 53
[ 1- 99] 50
46-30
Purpose Setting
Function
(Purpose)
Used to set the AE limit.
(Initial screen) (Input screen)
Display items Setting range Default
1:AE
0-31 0
2:AE(TS)
48
48-1
Purpose Adjustment
Function
(Purpose)
Used to adjust the copy mode magnification ratio (main
scanning direction, sub scanning direction).
Section Image processing
Item Picture quality
(Initial screen) (Input screen) (Executing screen)
Display items Content
Setting
range
Default
1:F-R(AUTO)
Main scanning magnification
ratio adjustment (auto)
––
2:F-R
Main scanning magnification
ratio adjustment
1-99 50
3:SCAN
Sub scanning magnification
ratio adjustment
60
4:SPF(SIDE1)
SPF surface sub scan
magnification ratio
50
5:SPF(SIDE2)
SPF back surface sub scan
magnification ratio
6:DUPLEX
DUPLEX sub scanning
magnification ratio adjustment
Sim46-30 AE LIMITTE
1:AE 0
2:AE(TS) 0
1
Sim46-30 AE LIMITTE
1:AE 0
[ 0- 31] 0
Sim48-1 COPY MAG.
1:F-R(AUTO) 50
2:F-R 50
3:SCAN 50
1/2 50