Owner manual

AR-5127 SIMULATION 8 - 32
Operation/procedure
Adjust and set FAX document read lead edge position, read and print
the document.
Note: Executable only when the FAX is installed.
Operation/procedure
After the adjustment/setting of FAX print lead edge position, read and
print the document.
Note: Executable only when the FAX is installed.
Operation/procedure
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
Operation/procedure
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
50-8
The adjustments on the machine side must have been normally
completed.
Purpose Adjustment
Function
(Purpose)
FAX lead edge adjustment (read)
Related soft SW SW44-5 to 8, SW45-5 to 8
Adjustment position Adjustment range
Adjustment
unit
A OC read lead edge position 43 – 50 – 57 lines 8 lines
B OC read left edge position 43 – 50 – 57 lines 8 dots
C OC read rear edge position 43 – 50 – 57 lines 8 lines
D OC read right edge position 43 – 50 – 57 lines 8 dots
E SPF read lead edge position 43 – 50 – 57 lines 8 lines
F SPF read left edge position 43 – 50 – 57 lines 8 dots
G SPF read rear edge position 43 – 50 – 57 lines 8 lines
H SPF read right edge position 43 – 50 – 57 lines 8 dots
50-9
Purpose Adjustment
Function
(Purpose)
FAX lead edge adjustment (print)
Related soft SW SW74-1 to 4, SW75-5 to 8
Adjustment position Adjustment range
Adjustment
unit
A Lead edge position 43 – 50 – 57 16 lines
B Left edge position 43 – 50 – 57 16 dots
50-10
Purpose Adjustment
Function
(Purpose)
Used to adjust the print image center position.
(Adjustment can be made for each paper feed
section.)
Section Image processing (ICU)
Item Picture quality Image position
OC read
SPF read
Read area
Read area
A
B
E
F
D
C
H
G
(Initial screen) (Input screen) (Executing screen)
Display items Content
Setting
range
Default Remark
1:BYPASS
Manual feed 1-99 50 Tray selection:
Manual feed
cassette is
specified.
2:TRAY1
1st cassette Tray selection:
1st cassette is
specified.
3:TRAY2
2nd cassette Tray selection:
2nd cassette is
specified.
4:TRAY3
3rd cassette Tray selection:
3rd cassette is
specified.
5:TRAY4
4th cassette Tray selection:
4th cassette is
specified.
6:DUPLEX
Back print Tray selection:
Made by user.
50-12
Purpose Adjustment
Function
(Purpose)
Used to adjust the print image center position.
(Adjustment can be made for each document mode.)
Section Image processing
Item Picture quality Image position
(Initial screen) (Input screen) (Executing screen)
Display items Content Setting range Default
1:OC
OC 1-99 50
2:SPF(SIDE1)
SPF front surface
3:SPF(SIDE2)
SPF back surface
Sim50-10 PRT.CENTER
1:BYPASS 50
2:TRAY1 50
3:TRAY2 50
1/2 50
Sim50-12 ORG.CENTER
1:OC 50
2:SPF(SIDE1) 50
3:SPF(SIDE2) 50
50