Specifications

2
Display Manager
Sharp Display Management Utility Software, Display Manager (hereafter referred to as "the Software"), allows
remote control and diagnostics of Sharp display devices* connected to a local area network (LAN) as well as the
modification of settings. Basic operations for selected devices can also be carried out using the Software, such
as powering on, switching into standby mode and switching input modes.
* In this operation manual, a display device is referred to as "a device". For more information about devices that
can be managed by the Software, see page 26.
Hardware and Software Requirements
The following hardware and software are required to use the Software.
PC running on Microsoft Windows
®
XP Home Edition, XP Professional or Windows Vista
®
(Japanese or English versions)
Free HDD space 5 MB or more
Interface Ethernet LAN port
■ This operation manual is intended for users who know how to use the Windows
®
operating systems and
a mouse. For questions concerning Windows
®
operating systems, please see the operation manual for
each operating system of Microsoft Corp. Please also note that specifications for the Software are
subject to change without notice.
■ The screenshots used in this operation manual are taken from Windows Vista
®
. Steps and screen
displays may differ slightly depending on the Windows
®
version used.
■ Microsoft
®
, Windows
®
and Windows Vista
®
are registered trademarks or trademarks of Microsoft
Corporation in the U.S.A. and other countries.
■ Adobe
®
, Adobe
®
Reader
®
, Acrobat
®
and Acrobat
®
Reader are registered trademarks or trademarks of
Adobe Systems Incorporated.
■ All other company and product names mentioned in this operation manual are the registered trademarks
or trademarks of their respective companies or organizations.
■ Please also note that depending on the operating environment and processing power of your PC, some
operations may run slowly.
Info
• Please note that operations are not guaranteed for hand-made PCs with a modified motherboard.
• Before using the software, configure your PC so that it does not automatically switch to sleep mode, system
standby mode or hibernation mode.
Disp_Manager_E_p02-05.p65 08.4.28, 5:36 PM2