Specifications

DK-A10H

DK-A10H(BK)

CD or MP3/WMA disc Playback

Advanced CD or MP3/WMA disc playback (continued)

 Programmed play

You can choose up to 32 selections for playback in the order you like.

To cancel the programmed play mode:

Whilst in the stop mode and the “MEM” indicator is lit, press the

CLEAR button on the remote control. The “MEM” indicator will

disappear and all the programmed contents will be cleared.

Adding tracks to the programme:

If a programme has been previously stored, the “MEM” indicator will

be displayed. Then follow steps 1 - 6 to add tracks. The new tracks

will be stored after the last track of the original programme.

To check which tracks are programmed:

Whilst the unit is stopped in the programmed play mode, press the

or button.

Notes:

 When a disc with programmed tracks is ejected, the programme

is automatically cancelled.

 Even if you press the ON/STAND-BY button to enter the stand-by

mode or change the function from CD to another, the programmed

selections will not be cleared.

 During the programme operation, random play is not possible.

1 Whilst in the stop mode, press

the MEMORY button to enter the

programming save mode.

2 Press the or button to

select the desired track.

Selected track number

3 Press the MEMORY button to save the track number.

4 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be

programmed.

If you make a mistake, the programmed tracks can be cleared

by pressing the CLEAR button.

5 Press the button.

The total number in memory will

appear.

6 Press the / button to start playback.

To clear the programmed selections:

Press the CLEAR button on the remote

control whilst the “MEM” indicator is flashing.

Each time the button is pressed, one track will

be cleared, beginning with the last track

programmed.