Specifications

35
DK-A10H
DK-A10H(BK)
References
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
 General
*This power consumption value is obtained when the demonstration
mode is cancelled in the power stand-by mode. Refer to page 10 to
cancel the demonstration mode.
 Tuner
 CD player
Power source AC 220 - 240 V, 50 Hz
Power con-
sumption
Power on: 34 W
Power stand-by: 0.6 W (*)
Output power Front Speaker:
RMS: 4 W (2 W + 2 W) (10% T.H.D.)
RMS: 4 W (2 W + 2 W) (0.9% T.H.D.)
Subwoofer:
RMS: 10 W (5 W + 5 W) (10% T.H.D.)
RMS: 6 W (3 W + 3 W) (0.9% T.H.D.)
Speaker 1-way type light-up speaker system
Front Speaker: 6.5 cm (2-1/2") - 12 ohms - Full
Range
Subwoofer: 10 cm (4") - 8 ohms - Woofer
Speaker
maximum
input power
Front Speakers: 4W/ Channel
Subwoofer: 10W / Channel
Speaker rated
input power
Front Speakers: 2W / Channel
Subwoofer: 5W / Channel
Output
terminals
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Video output: 1Vp-p
Input
terminals
Auxiliary (audio signal):
500 mV/47 k ohms
Dimensions Width: 500 mm (19-11/16")
Height: 150 mm (5-7/8")
Depth: 250 mm (9-7/8")
Weight 5.3 kg (11.7 lbs.)
Frequency range FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
Type Single disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter Multi bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)