Operating instructions
9
DK-AP8P
Preparation for Use
System connections
■ Connecting iPod or iPhone to TV
Photo and video files from iPod or iPhone can be viewed by
connecting the system to TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO OUT
jack at the back of the unit and set the TV Out on the iPod or
iPhone unit to “ON” position.
■ Watching videos on a TV connected to iPod or
iPhone
Notes:
● If the TV Out setting is already turned ON at video menu, the
video is automatically displayed on the TV screen when iPod
or iPhone starts playback.
● To return to watching video on iPod or iPhone screen, repeat
steps 1 to 3.
● During iPod or iPhone video playback, touching the TV
DISPLAY pad will not toggle video out display between iPod
or iPhone and TV.
● Please make sure to set iPod or iPhone unit to either NTSC
or PAL to match your TV signal. Please visit Apple’s home
page for further information.
● Customer should also refer iPod or iPhone operation manual
before making video out setting.
■ Using with the AC/DC adaptor
Notes:
● Unplug the AC/DC adaptor from the AC outlet if the unit will
not be used for a prolonged period of time.
● Connecting the AC/DC adaptor to the unit disconnects the
batteries.
● Use only the supplied AC/DC adaptor. Using other AC/DC
adaptor may cause an electric shock or fire.
Make sure to unplug the AC/DC adaptor before making
any connections.
1 Enter the iPod or iPhone menu.
Touch the TV DISPLAY pad. The ESOUND LED will blink
twice to display video on the TV screen.
2 Select the desired video to be played.
3 Press the button on the iPod unit or touch the
ENTER pad on the remote control to start playback.
VT
TUO OEDIV
To video
input jack
Video cable
(not supplied)
1 Plug the AC/DC adaptor cable into the DC IN jack on
the unit.
2 Plug the AC/DC adaptor into an AC outlet.
2
1
DC IN Jack
(DC 6V)
AC/DC Adaptor Cable
AC Outlet
(AC 100 - 240 V ~ 50/60 Hz)