Specifications

0
Listening to a CD or MP3/WMA disc (continued)
Various disc functions■
Function Main
unit
Remote
control
Operation
Play
Press in the stop mode.
Pause
Press in the playback mode.
Press the / button to resume
playback from the paused point.
Stop
Press in the playback mode.
Track
up/down
Press in the playback or stop
mode.
If you press the button in the
stop mode, press the /
button to start the desired track.
Fast
forward/
reverse
Press and hold down in the
playback mode.
Release the button to resume
playback.
Direct track search■
By using the Numeric buttons, the desired tracks on the current
disc can be played.
Use the Numeric buttons on the remote control to select the
desired track while playing the selected disc.
The Numeric buttons allow you to select up to number 9.
When selecting number 10 or higher, use the “10+” button.
A. For example, to choose 3
Press the “10+” button once.
Press the “1” button.
Press the “3” button.
�
�
3�
Selected track number
B. For example, to choose 30
Press the “10+” button twice.
Press the “1” button.
Press the “3” button.
Press the “0” button.
�
�
3�
�
Notes:
A track number higher than the number of tracks on the disc
cannot be selected.
During random play, direct search is not possible.
To stop playback:
Press the
(CD ) button.
Repeat play■
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until “Repeat One”
appears. Press the / (CD / ) button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until “Repeat All”
appears. Press the / (CD / ) button.
To repeat desired tracks:
Perform steps 1 - 4 in “Programmed play” section on this page
and then press the PLAY MODE button repeatedly until “Repeat
All” appears.
To cancel repeat play:
Press the PLAY MODE button
repeatedly until “Normal”
appears and “ ” disappears.
Caution:
After performing repeat play, be sure to press the
(CD ) button.
Otherwise, the disc will play continuously.
●
●
●
●
●
Random play (shufe)■
The tracks on the disc can be played in random order automatically.
To random play all tracks:
Press and hold the PLAY MODE button on the remote control until
“Random” appears. Press the
/ (CD / ) button.
To cancel random play:
Press the PLAY MODE button again. “RDM” indicator will disappear.
Notes:
If you press the button during random play, you can move to
the track selected next by the random operation. On the other
hand, the button does not allow you to move to the previous
track. The beginning of the track being played will be located.
In random play, the unit will select and play tracks
automatically. (You cannot select the order of the tracks.)
Programmed play (CD)■
You can choose up to 32 selections for playback in the order you like.
While in the stop mode, press the MEMORY button on the
remote control to enter the programming save mode.
Press the Numeric buttons
on the remote control to
select the desired track.
�
Selected track number
Note: To select track number 10 or higher, refer ’Direct track
search’ on this page.
Repeat step 2 for other tracks. Up to 32 tracks can be programmed.
If you want to check the programmed tracks, press the MEMORY
button repeatedly. If you make a mistake, the programmed tracks
can be cleared by pressing the CLEAR button.
Press the / (CD / ) button to start playback.
Programmed play (MP3/WMA)■
While in the stop mode, press the MEMORY button to enter
the programming save mode.
Press the PRESET ( or ) button on the remote control to
select the desired folder.
Then press Numeric buttons on the remote control to select
the desired tracks.
Note: To select track number 10 or higher, refer ’Direct track
search’ on this page.
Repeat step 2 for other folder/tracks. Up to 32 tracks can be
programmed.
Press the
/ (CD / ) button to start playback.
To cancel the programmed play mode:
During programmed stop mode, press the
(CD )
button. The display will show “Memory Clear” and all the
programmed contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the “MEM”
indicator will be displayed. Press the MEMORY button.
Then follow step 2 to add tracks.
●
●
�
3�
�
�
�
3�
�