Specifications


Specications
General■
Power source
AC 220 - 240 V ~ 50/60 Hz
Power
consumption
Power on: 26 W
Power stand-by: 0.4 W (*)
Speaker
1-way speaker system
Speaker: 6.5 cm (2-1/2”)
Speaker
maximum input
power
50 W/channel
Speaker rated
input power
25 W/channel
Dimensions
Width: 475 mm (18 - 11/16”)
Height: 191 mm (7 - 1/2”)
Depth: 83 mm (3 - 1/4”)
Weight
2.7 kg (5.9 lbs.)
( * ) This
power consumption value is obtained when the
Network Stand-by (demonstration) mode is cancelled
in the power stand-by mode. Refer to page 3 to cancel
the Network Stand-by (demonstration) mode.
Amplier■
Output power
RMS: 50 W (25 W + 25 W)
(10% T.H.D.)
RMS: 40 W (20 W + 20 W)
(1% T.H.D.)
Output terminals
Headphones: 16 ohms
(recommended: 32 ohms)
Input terminals
Audio In (audio signal):
500 mV/47 k ohms
CD player■
Type
Single disc multi-play compact disc
player
Signal readout
Non-contact, 3-beam
semiconductor laser pickup
D/A converter
Multi bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
USB (MP3 / WMA)■
USB host
interface
Complies with USB 1.1 (Full
Speed)/2.0 Mass Storage
Class.
Support Bulk only and CBI
protocol.
●
●
Support le
MPEG 1 Layer 3
WMA (Non DRM)
●
●
Bitrate support
MP3 (32 ~ 320 kbps)
WMA (64 ~ 160 kbps)
●
●
Other
Maximum total number of MP3/
WMA les is 65025.
Maximum total number of
folders is 999 INCLUSIVE of root
directory.
The ID3TAG information supported
are TITLE, ARTIST and ALBUM
only.
Supports ID3TAG version 1 and
version 2.
●
●
●
●
File system
support
Support USB devices with
Microsoft Windows/DOS/FAT
12/FAT 16/ FAT 32.
2 kbyte block length for sector.
●
●
Tuner■
Frequency range
FM: 87.5 - 108.0 MHz
AM: 522 - 1,620 kHz
Preset
40 (FM and AM station)
As part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes
for product improvement without prior notice. The performance specication gures indicated are nominal values of
production units. There may be some deviations from these values in individual units.