Operation Manual, User's Manual
Table Of Contents
2-25
COPIER►BASIC PROCEDURE FOR MAKING COPIES
ENLARGE/REDUCE
AUTO RATIO SELECT
This section explains how to automatically select the appropriate ratio to meet the paper size when manually changing
the paper tray to make a copy on paper that has a size different from the original.
For a non-standard size original, the size must be entered in order to use Auto Image.
To change the default ratio:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [Copy Ratio].
1
Manually select the paper tray, and place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► SELECTING THE PAPER TRAY FOR COPYING
(page 2-12)
► AUTOMATIC DOCUMENT FEEDER (page 1-107)
► DOCUMENT GLASS (page 1-109)
2
Tap the [Copy Ratio] key.
► COPY MODE (page 2-3)
3
Tap the [Auto Image] key.
An enlargement/reduction ratio appropriate for the set
original size and selected paper size is automatically
selected.
The automatically selected ratio will appear in the ratio
display.
• To cancel the Auto Ratio Selection setting:
Tap [Auto Image] to deselect it.
• To return the ratio to 100%:
Tap the [100%] key.
A4A3
A4
A5
A5
B5
B5
B4
B4A3
Preview
Copies
Original
Paper
By Paper Size
100
( 25~200 )
CA
Copy Ratio
1
Start
Colour
Start
B/W
Auto Image
Slightly Reduce
(3% Reduction)
A4A3
A4
A5
A5
B5
B5
B4
B4A3
Preview
Copies
Original
Paper
By Paper Size
100
( 25~200 )
CA
Copy Ratio
1
Start
Colour
Start
B/W
Auto Image
Slightly Reduce
(3% Reduction)