Operation Manual

15
SAFETY LOCK
The Safety Lock prevents unwanted oven opera-
tion such as by small children.
The oven can be set so that the control panel is
deactivated or locked. To set, touch CLOCK, the
number 1 pad and then touch the START pad
and hold for 3 seconds. Should a pad be touched,
will appear in the display.
To cancel, touch CLOCK, the number 1 and
STOP/CLEAR pads.
TIMER
• Suppose you want to time a 3-minute long dis-
tance phone call.
PROCEDURE
AUDIBLE SIGNAL
ELIMINATION
If you wish to have the oven operate with no au-
dible signals, touch CLOCK, the number 5 and
then touch the START pad and hold for 3 seconds.
To cancel and restore the audible signal, touch
CLOCK, the number 5 and STOP/CLEAR pads.
DEMONSTRATION
MODE
To demonstrate, touch CLOCK, 0 pad and then
touch START pad and hold for 3 seconds.
will appear in the display. Cooking opera-
tions and specific special features can now be dem-
onstrated with no power in the oven. For example,
touch MINUTE PLUS pad and the display will show
and count down quickly to 0 and the
.
To cancel, touch CLOCK, then the 0 and STOP/
CLEAR pads. If easier, unplug the oven from the
electrical outlet and replug.
TIMER
CLOCK
PROCEDURE
1
Touch TIMER pad.
2
Enter time.
03 0
SA FE
OTHER CONVENIENT FEATURES
S HO
1.00
Disconnect the power cord before cleaning or leave the door open to inactivate the oven during
cleaning.
CLEANING AND CARE
Waveguide Cover
The waveguide cover is made from mica so requires
special care. Keep the waveguide cover clean to
assure good oven performance. Carefully wipe with
a damp cloth any food spatters from the surface of
the cover immediately after they occur. Built-up
splashes may overheat and cause smoke or pos-
sibly catch fire. Do not remove the waveguide cover.
Odor Removal
Occasionally, a cooking odor may remain in the
oven. To remove, combine 1 cup water, grated peel
and juice of 1 lemon and several whole cloves in a
2-cup glass measuring cup. Boil for several min-
utes using 100% power. Allow to set in oven until
cool. Wipe interior with a soft cloth.
Turntable/ Turntable Support
The turntable and turntable support can be re-
moved for easy cleaning. Wash them in mild,
sudsy water; for stubborn stains use a mild
cleanser and a non-abrasive scouring sponge.
They are also dishwasher-proof. The turntable mo-
tor shaft is not sealed, so excess water or spills
should be wiped up immediately.
Exterior
The outside surface is painted. Clean the outside
with mild soap and water; rinse and dry with a soft
cloth. Do not use any type of household or abrasive
cleaner.
Door
Wipe the window on both sides with a damp cloth
to remove any spills or spatters. Metal parts will be
easier to maintain if wiped frequently with a damp
cloth. Avoid the use of spray and other harsh clean-
ers as they may stain, streak or dull the door sur-
face.
Touch Control Panel
Wipe the panel with a cloth dampened slightly with
water only. Dry with a soft cloth. Do not scrub or
use any sort of chemical cleaners. Close door and
touch STOP/CLEAR pad.
Interior
Cleaning is easy because little heat is generated to
the interior surfaces; therefore, there is no baking and
setting of spills or spattering. To clean the interior sur-
faces, wipe with a soft cloth and warm water. DO NOT
USE ABRASIVE OR HARSH CLEANERS OR
SCOURING PADS. For heavier soil, use baking soda
or a mild soap; rinse thoroughly with hot water. NEVER
SPRAY OVEN CLEANERS DIRECTLY ONTO ANY
PART OF THE OVEN.