User's Manual

UNPACKING AND INSTALLATION INSTRUCTIONS

MOUNTING OVEN TO THE WALL

Two people are recommended to attach the Microwave Oven to the Mounting Plate.

1. Thread the Power Supply Cord through the hole made in the bottom of the top cabinet. Install the oven by

snapping it onto the Mounting Plate. See Figure 13.

2. Use two Tapping Screws 5 to secure the levers that are on the bottom of the oven. See Figure 14.

3. Use two Top Cabinet Screws 3 and two Flat Washers 6, supplied in the INSTALLATION HARDWARE, to

attach the unit to the top cabinet. See Figure 15.

4. Make a bundle of the Power Supply Cord and attach it to the inside of the cabinet using the Power Cord Hanger

4. See Figure 15.

Figure 13

Figure 14

Figure 15

1. Make sure the unit has been installed according to

all of the Installation Instructions, the Wall and Top

Cabinet Template.

2. Remove all packing material from the oven.

3. Plug in the power cord.

CHECKLIST FOR INSTALLATION

4. Read the Operation Manual and Installation

Instructions.

5. Keep the Operation Manual and Installation

Instructions for the local electrical inspector’s use.

NOTE:

Screw length has been designed to

accommodate 3/8" and above cabinet

depth. If less, screw must be cut to

required length.

OTC/1200,1201#B298 10/22/01, 9:50 AM11