User's Manual

34
MULTIPLE SEQUENCE COOKING
OTHER CONVENIENT FEATURES
SUPER STEAM CONVECTION AND CONVECTION
There are 3 patterns in Super Steam Convection and
Convection which can be programmed into Multiple
Sequence Cooking.
1 Preheat + Bake or Roast (Convection) + Bake or
Roast (Convection)
2 Preheat + Roast (Super Steam Convection) + Bake
or Roast (Convection)
3 Preheat + Convenience Foods (Super Steam
Convection) + Bake or Roast (Convection)
• Preheat can be omitted.
* Suppose you want to cook in Sequence Cooking with
Preheating.
1st stage is at a temperature of 375°F for 50 minutes.
2nd stage is at a temperature of 400°F for 10 minutes.
PROCEDURE
1
Press Convection to
program the second stage.
2
For 1st stage, follow the steps 1 to 5 in single
SuperSteam Convection. See page 17.
Turn the Dial to enter
the desired temperature
400°F and press Enter.
3
Turn the Dial to enter the
desired cooking time 10
minutes.
4
Press START .
5
MICROWAVE
Your oven can be programmed for up to 4 automatic
cooking sequences, switching from one power level
setting to another automatically. Sometimes cooking
directions tell you to start on one power level and then
change to a different power level.
• Suppose you want to cook for 5 minutes at 100% and
then continue to cook for 30 minutes at 50%.
PROCEDURE
1
Press Microwave to
program the second stage.
2
For 1st stage, follow step 1 to 3 in manual
microwave cooking under To Set Power
Level, page 32.
Turn the Dial to enter
cooking time 30 minutes
and press Enter to
proceed.
3
Turn the Dial to select
power level 30%.
4
Press START.
5
SEC AX1200 O/M,P20- 08.9.24, 1:36 PM34
27
the steps
堀川様
ページ32を引用するため30%に変更しました。
30
50