User's Manual DP750 Flatbed Bill Printer
DP750 User's Manual Important Safety Instructions 1. 2. 3. Read all of these instructions carefully and thoroughly and save them for later reference. Follow all warnings and instructions in the manual as well as marked on the product. Unplug this product from the power outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water. 5. Do not place this product on an unstable cart, stand or table.
DP750 User's Manual Table of Contents Important Safety Instructions .....................................................................................................................i Chapter 1 Overview ....................................................................................................................................1 1.1 Features ..............................................................................................................................................
DP750 User's Manual 4.7 Using the Self Test Functions............................................................................................................33 4.7.1 ASCII Test Mode.........................................................................................................................33 4.7.2 Maintenance Printing Test (H pattern) ........................................................................................34 4.7.3 Alignment Adjust Mode ........................................
DP750 User's Manual Chapter 1 Overview 1.1 Features Thank you for purchasing this Jolimark DP750 printer. This printer is a 24 pin flatbed Hi-Speed Bill printer which can fulfill multi-function printing requirement, especially for enterprise and office. Flatbed Paper-feed Mechanism Newly-style 106 column flatbed printer can feed the paper smoothly. Special designed paper guide makes you reassure to print continuously.
DP750 User's Manual Bar Code Generator NW -7, EAN-13, EAN-8, Code 39, Industrial 2of 5, Interleaved 2 of 5, Code 128B, and Code 128C are built-in as standard. Enhance Chinese Character Set This printer contains GB18030 Chinese character set and also supports 4 bytes Chinese printing. Facility Switch of Printing Mode This printer is special designed with a COPY intelligent key. In OFFLINE mode, press COPY key on control panel and it can switch among NORMAL mode, “1+3” mode and “1+6” mode.
DP750 User's Manual Chapter 2 Preparation 2.1 Unpacking Check the following items in the package, if any of these items is missing, please contact your dealer. Paper guide B (options) Paper guide A D C B A F E G H Figure 2-1 Packing list in the printer box A: Printer B: Front table C: Ribbon cartridge JMR121 D: Power cord E: Driver CD (Including user's manual and driver) F: Paper feed knob G: Packing list H: Facility user's guide Caution: The fittings please refer the packing list.
DP750 User's Manual 2.3 Identifying the Parts Figures 2-2 and 2-3 highlight the main components of the printer.
DP750 User's Manual ·Where there is excessive dust. ·Where it may be splattered with oil or metallic dust. ·Where it may be exposed to direct sunlight. ·Where it may be accidentally splashed with water. 2.4.1 Installing the Paper Feed Knob 1. The openings of the Paper feed knob aim at the openings on the left, then insert. 2. Press the Paper Feed Knob to the crust. Paper feed knob Figure 2-5 Installing the paper feed Knob 2.4.
DP750 User's Manual 6. Turn the ribbon knob in the direction of the arrow to remove any slack from the ribbon so it is easier to install. Ribbon cartridge JMR121 Ribbon knob Ribbon nip Ribbon core Figure 2-8 Ribbon cartridge 7. Insert the ribbon cartridge into the printer as shown; then press both sides of the cartridge down firmly to fit the plastic hooks into the printer slots.
DP750 User's Manual Note: Before connecting the parallel interface or the serial interface, please make sure the power of the printer is shut down. Must after tighten the cable you may turn on the power, or it will damage the printer. 2.5.1 Connecting to the parallel interface 1. Turn off both the computer and the printer. Plug the parallel cable securely into the printer's parallel interface connector. Squeeze the wire clips together until they lock in place on either side. 2.
DP750 User's Manual 2.5.4 Connecting to the Serial Interface 1. Turn off both the computer and the printer. Plug the serial cable connector securely into the printer's serial interface. Squeeze the wire clips together until they lock in place on both side of the connector. 2. Plug the other end of the cable into the computer's serial interface; then tighten the screws on both sides of the connector. Screw Serial interface Serial cable Figure 2-13 Connecting to the serial interface 2.
DP750 User's Manual assistance. Do not plug in the power cord. 2. Please use the exactitude electrical outlet. 2.7 Installing Driver The Driver CD provides the printer drivers for Microsoft Windows 98, Windows 2000/XP and VISTA. Please use the cable to connect the computer with the printer, then turn on the computer and the printer, put the driver CD into the CD-ROM. Install driver by the following way: Auto-install way Double click the file "Setup.
DP750 User's Manual you should select the path as follow: CD-ROM-"Driver"-"WIN2000 (XP-Vista-Win7) ", where you can find a file named: DP750.inf, click "Open", then click "OK" to return to the window of "Manufacturers/Printers", click "Next". 6. Follow the direct click "Next" gradually till the installation is finished. The installing steps for Windows 98 are as follows: (1) The installing steps with a parallel cable or a serial cable: 1. Click "Start" → "Settings" → "Printers". 2.
DP750 User's Manual 4. Come out a window of "Install From Disk", click "OK", return to a window of "Add Printer", then click "Next". 5. Come out a window of "Printer port", select "Available ports", select "JMUSB", click "Next", and then show the printer’s name. If the system is not installed by other printer driver process, the printer is treated as default printer by the application process of Window98 environment, click "Next”.
DP750 User's Manual 2. Search printer Click “Search” button in the main interface, the dialog box appearing will begin searching automatically and show appearance, listing a printer in the main interface if found. The time is counting down in the progress bar (10s in total) and the search will finish as soon as the time is over. When going on searching, press “search” button again.
DP750 User's Manual 1) Correlative description for IP address settings In order to search and set printer’s IP address conveniently for the first time, the factory default setting is DHCP mode which assigns IP address dynamically. If there is no DHCP server in the connected LAN and printer is set to DHCP mode as well, then it will use the internal pre-set address (IP: 10.0.0.1, Subnet Mask: 255.255.255.0) automatically.
DP750 User's Manual or “Upgrade-install printer network driver (setting driver’s network port)”. 2.8.3 Installing Printer Network Driver The ways of installing network driver are divided into Newly-install way and Upgrade-install way according to whether the PC installs the printer driver or not. If the printer driver hasn’t been installed on the PC, adopt newly-install way whose steps are shown in “Newly-install printer network driver”.
DP750 User's Manual 7) Come out a window of "Additional Port Information Required", select "Custom" in the "Device Type", and then click "Settings". 8) Come out a window of "Port Settings"”. Affirm that "Port name” and "Printer name or IP address" are correct, "Protocol” is "RAW" and “Port Number" is "9100", click "OK".
DP750 User's Manual 9) Return to "Additional Port Information Required", click "Next". 10) Come out a window of "Completing the Add Standard TCP/IP Printer Port Wizard”, click "Finish". 11) In the selection of "Manufacturers/Printers", click "Have Disk", and then click "Next". 12) Come out a window of "Install From Disk".
DP750 User's Manual 4) Come out a window of “Printer port”, select “Standard TCP/IP Port”, click “New port”. 5) Come out a window of “Add Standard TCP/IP Printer Port Wizard”, click “Next”. 6) Come out a window of “Add a port”, import the IP address reported by the “Setting printer’s IP address” in the “Printer name or IP address” column. Take IP address “192.168.0.240” for example. “Port name” is created automatically after finishing filling in IP address. Click “Next”.
DP750 User's Manual 7) Come out a window of “Port information”, select “User-defined” in the “Equipment style”, then click “setting”. Come out a window of “Additional Port Information Required”, select “Custom” in the “Device Type”, then click “settings”. 8) Come out a window of “Port Settings”. Affirm that “Port name” and “Printer name or IP address” are correct, “Protocol” is “RAW” and “Port Number” is “9100”, click “OK”.
DP750 User's Manual 9) Return to “Additional Port Information Required”, click “Next”. 10) Come out a window of “Completing the Add Standard TCP/IP Printer Port Wizard”, click “Finish”. 11) Return to “Printer Ports”, click “Close”. 12) Return to “Properties”, make sure the network port is selected, click “Apply”, and then click “Close”. Thus, printer’s network port setting is finished.
DP750 User's Manual - 20 -
DP750 User's Manual Chapter 3 Paper loading 3.1 Paper Thickness Adjustment Before loading cut sheet or tractor paper, you have to adjust the gap adjust lever on the right of the printer. To feed thicker paper through the printer, you need to move the gap adjust lever from its standard position. The lever moves the print head relative to the platen so that there is more room for the paper. Adjusting the Gap adjust Lever To obtain good quality printing and prevent problems (paper jam etc.
DP750 User's Manual 3. Position the left hand cut sheet guide by referring to the marking on the window cover. (On the left side of the window cover, “O” indicates the transverse valid printing home position) As shown in Figure 3-3. “0”position Paper guide Figure 3-3 Adjusting the paper guide 4. If paper is longer, please pull out the small front table. (Figure 3-4) Figure 3-4 pull out the small front table 5. Insert the paper as shown in Figure 3-5.
DP750 User's Manual 3.3 Using tractor paper This printer feeds tractor paper from the rear of the printer to the front. Out In Figure 3-6 Feeding direction of tractor paper 3.4 Tractor Paper loading 1. Connect the printer and the power supply outlet with the power cord. 2. Set paper select lever toward the front of printer as shown in Figure 3-6. Paper select lever Paper feed knob Power switch Figure 3-7 Setting the paper select lever 3.
DP750 User's Manual 5. Ensure the tractor paper is inline with the printing home position. If the paper is not aligned with the printing home position, align the paper, and then fasten the lock lever to lock the tractors. Tractor Paper Top Figure 3-9 Setting paper on the sprocket pins 6. Slide the right tractor to left to take up any slack in the paper, and then fasten the lock lever to fix the tractor in position. 7. Align the paper with the print start position.
DP750 User's Manual Chapter 4 Control Panel 4.1 Control Panel Keys and LEDs This control panel consists of 4 keys and 4 indicator LEDs as shown in Figure 4-1. Figure 4-1 The Printer Control Panel The following table details each indicator LED function: Indicator LED Off On Blink PAPER OUT (red) The printer is in the standard mode. Combinatorial reference (see Appendix A.2) paper runs out and during error condition ONLINE (green) Combinatorial reference (see Appendix A.
DP750 User's Manual LOAD/EJECT COPY When offline, press LOAD/EJECT key can control cut sheet or tractor paper feeding. In cut sheet mode, if you press LOAD/EJECT key when offline, the paper will be ejected. In tractor paper mode, if you had fix tractor chain wheel, press LOAD/EJECT key when offline, the paper will be fed to the printing home position. The printer now being in the online mode. You need to being in the offline mode again, then press LOAD/EJECT key, paper will be fed to the tear position.
DP750 User's Manual decrease. NOTE To exit without saving, just turn the printer OFF. 4.5 Tear-off Adjustment Mode There is a tear-off bar at the edge of the window cover. When you have finished printing, you can advance the tractor paper on the tracker to the tear-off bar by the tear-off function to easily tear off the perforated sheets. The tear off setting determines the distance between the perforation of tractor paper and the tear-off bar.
DP750 User's Manual next section. 2. When the driver has compress printing scale function, If choose 80% compress mode in the driver, at the same time, choose 75% compress mode in the menu settings system. Then it will comes a result that the transverse compress will be 80% x 75% = 60%. 3. When choose 75% compress mode in the menu settings system, HIGH SPEED/SUPER HIGH SPEED print mode will not be valid.
DP750 User's Manual Current Setting Report LANGUAGE CHINESE EMULATION OKI CHAR. MODE CHINA FONT SANS SER COURIER PRESTIGE ENG PITCH 12 CPI 15 CPI PROPORTIONAL CHI PITCH 7.5 CPI SLASH ZERO ON FRANCE JAPAN GERMANY NORWAY U.K.
DP750 User's Manual Caution: 1. Only after installed the option part of auto edge-detect, the items of edge-detect function and black mark detect function will be printed out. 2. If the printer doesn’t install Ethernet, the relative Ethernet information, such as MAC, IP and so on, will not be printed out in the self-testing and setting report. 4.6.
DP750 User's Manual 4.6.3 Restoring Factory Printer Settings You can restore to the factory printer settings without having to work through the Setup Menu System to reset the menus. To restore to the factory settings: 1. Make sure that the printer is ONLINE 2. Press and hold down the ONLINE and SPEED keys on the control panel for 3 seconds.
DP750 User's Manual QUIET MODE Select the printer into quiet mode. The acoustic noise is lower but the printing speed is reduced by half. AUTO LF Select (ON) or cancel (OFF) the automatic advance of the paper by one line after every carriage return command. AUTO TEAR OFF Enable or disable AUTO TEAR OFF function. The feed delay for the tear-off advance can be set. LOADING This determines the action of the printer while the single sheet paper is front feeding.
DP750 User's Manual 5. The setting way is corresponding with that of printer menu system. In the “Printer Settings” layout, select the first class menu in the combobox of “Select Printer Setting Class”, select the second menu in the “Configuration” and set the item in the current parameters list. 6. Click the button “Reset All” to reset all the parameters to be the driver’s default, but not change the printer’s settings. 7.
DP750 User's Manual ASCII TEST MODE Jolimark DP750 VX.X XXXX/XX/XX !”#$%&’()*+,-./10123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_’abc !”#$%&’()*+,-./10123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_’abcd ”#$%&’()*+,-./10123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_’abcde Figure 4-4 The former of English self-test 4.7.2 Maintenance Printing Test (H pattern) One page printing of H pattern is performed by turning power on, while pressing the LF/FF key.
DP750 User's Manual The results of the hex dump printing will be shown as follows.
DP750 User's Manual Appendix A Caution z z z z Do not open the printer top cover or rotate the paper feed knob while printing, Do not place any heavy object on the printer no matter it is printing or not. Turn off both the printer and the Host before connecting them. Not allow plug in the power cord or the signal cord. Or it may burn out the Chip and damage the printer interface or the power supply. Turn off the printer and pull out the plug before cleaning the printer.
DP750 User's Manual Protect cover Protect cover Protect cover Light extinction patch Light extinction patch Figure A-2 Cleaning the dust on the protect cover of the photoelectric sensor and the light extinction patch Note: 1. Turn off printer and pull out the power cord before cleaning. 2. Being used under dust circumstance, the carriage shaft may stack much dust and affect the print quality. 3. If you have just finished using the printer, let the print head cool for a few minutes before you touch it. 4.
DP750 User's Manual A.3 Error LED on the Control Panel In case of printer error, the printer enters off line state and indicates an alarm by blinking the LEDs as shown below. LED Error Remedy The PAPER OUT LED blinks and the ONLINE LED is off. Paper empty or paper jam Load paper or remove the jammed paper The PAPER OUT LED and the ONLINE LED blink simultaneously quickly. Paper slant Re-insert the cut sheet paper correctly The PAPER OUT LED and the ONLINE LED blink alternately quickly.
DP750 User's Manual Appendix B B.1 Specifications B.1.1 General Item Description Type 24-Pin Flatbed Dot Matrix Impact Printer Print direction Unidirectional or bidirectional Number of columns 136 columns (10 CPI) ASCII Print speed Chinese speed 10 CPI 12 CPI speed 6.7 CPI 7.
DP750 User's Manual Multiple paper (Every page): 30 ~ 40 g/m2 Width: 76 ~ 420 mm Continuous paper Total Thickness: 0.06 ~ 0.85 mm Weight (Single paper): 45 ~ 150 g/m2 Multiple paper (Every page): 30 ~ 40 g/m Max paper thickness 0.
DP750 User's Manual DATA STROBE T1 T2 T 3 BUSY ACK (Field number 77: MODE 1) T1 ~ T3: Min.0.5us T4: Approx.3.8us T5: Approx.2.1us T5 T4 ACK (Field number 77: MODE 2) T4 B-1 Sequence Diagram Connector Pin Assignments Signal Pin No. Return Line Pin No.
DP750 User's Manual 2 1 3 4 B-2 USB-B Type Connector B.2.3 Ethernet Interface 10/100Base-T Ethernet interface, it can connect to 10/100M Ethernet. B-3 Ethernet interface B.2.
DP750 User's Manual O: USE X: NOT USE *: HIGH LEVEL Signal description: Prescription of signal level on RS-232C 1=Low (Mark): -23 ~ -3 V 0=High (Space): +3 ~ +25V RDY/BSY protocol (RS-232C) PIN 1 FG (Frame Ground — connect to the printer rack Connect to the circuit frame ground PIN 3 RD (Received Data) Receive serial data from the computer through this pin. This pin is low level when it receives no data.
DP750 User's Manual ≥4mm ≥3mm Max.345.44mm ≥3mm Printable Area ≥6mm B-5 The printable area of Cut sheet, check, post card Tractor Paper Printable Area: Max.345.44mm Printable Area ≥6mm ≥15mm ≥15mm B-6 The printable area of tractor paper B.4 Cautions of Printing z The paper which inserted should not be collapsed, tore or carry any staple, clip or pin and so on. (As shown in B-7) Or else, it will damage the printer seriously. z Do not use the print paper which edges fall into disrepair.
DP750 User's Manual Pin Tear Clip Staple B-7 One page tractor paper One page copy paper B-8 - 45 -
DP750 User's Manual Appendix C Command Code Summary C.1 Epson Emulation Name Code (Symbol) Code (Hex.) Code (Dec.
DP750 User's Manual Name Cancel Superscript/Subscript Mode Select Print Mode Select/Cancel Double Height Mode Select/Cancel Quiet Print Mode Select Justification Mode Select Character Style Define and Apply a Style of Scoring Print Data as Characters Code (Symbol) ESC T ESC ! n ESC w n ESC s n ESC a n ESC q n ESC ( ESC ( ^ Code (Hex.) 1Bh 54h 1Bh 21h 1Bh 77h 1Bh 73h 1Bh 61h 1Bh 71h 1Bh 28h 2Dh 1Bh 28h 5Eh Code (Dec.
DP750 User's Manual Name Select Tear Off Function Select Font Style Select ELITE Width Mode (12CPI) Select PICA Width Mode (10CPI) Select 15CPI Mode Select 17CPI Mode Select 20CPI Mode Select Double Height Mode Select Fourfold Height Mode Select Double Width Mode Select Fourfold Width Mode Select Double Width and Double Height Mode Code (Symbol) ESC ~ C n ESC ~ x n ESC ~ 3 1 ESC ~ 3 0 ESC ~ 3 6 ESC ~ 3 2 ESC ~ 3 7 ESC ~ 1 1 ESC ~ 1 2 ESC ~ 1 3 ESC ~ 1 4 Code (Hex.