Instruction manual

28
5.5 Detach / Attach of Tribrach
The instrument is easily detached or attached to the tribrach, with a tribrach
locking lever loosened or tightened for this purpose.
● Detachment
1
Loosen the tribrach locking lever, by revolving it 180° or 200g in the
counterclockwise direction (which will point the triangle mark
upwards).
2
Grip the carrying handle firmly with one hand while holding the
tribrach with the other. Then lift the instrument straight upwards and
off.
● Attachment
1
Hold the instrument by the carrying handle, with one hand, and
carefully lower it on top of the tribrach while, at the same time,
coinciding the alignment piece with the tribrach alignment groove on
the instrument and tribrach respectively.
2
When fully seated, revolve the tribrach locking lever 180° or 200g
clockwise ( which will point the triangle mark downwards again).
● Locking the Tribrach Locking Lever
The tribrach locking lever can be locked, to prevent it be accidentally
removed, especially if the upper instrument section is not being detached
very often. Simply tighten the securing screw on the locking lever with the
accessory screwdriver, found in the case.
Alignment piece
Securing screw
Tribrach fixing lever
Tribrach alignment
groove
Only for detachable tribrach type