Service manual

XV-Z2000

DT-400

13 DVD White

balance

(Auto

adjustment)

1. Feed the component 75%

gray scale signal.

2. Group: PIXEL

Subject:R-GAIN (R)

B-GAIN (B)

Input 5 Color

difference input

1. Adjust the white balance by controlling R-GAIN and

B-GAIN.

(Adjust x=298 and y=319.)

1. Make the following settings.

Destination Process adjustment

Remote controller setting

Europe SS3 Factory setting 3

North America SS4 Factory setting 4

15 Factory setting

14 DLP voltage

adjustment

1. Read the DLP-listed volt-

age rank.

2. Make the switch setting

corresponding to the read-

out rank.

(on the Formatter PWB)

1. Make this adjustment when the DLP chip has

been replaced or the combination of DLP chip

and Formatter PWB has been changed.

Ranking: D E

No. Adjusting point Adjusting conditions Adjusting procedure