Service manual

XV-Z2000

DT-400

*1272-6bbc

CHXXXX

LLLLL

YYYYYYY

L LLL LM

TI Intenal Numbering

2-Dimensional Matrix Code

(DMD Part Number and

Serial Number)

Part 1 of Serial Number

(7 characters)

Part 2 of Serial Number

(6 or 7 characters)

DMD Part Number

The last alphabet letter indicates the

Bin voltage setting (D. E).

* Precautions in setting up the DMD (Digital Micromirror Device) unit

Before connecting the formatter PWB to the optical engine, take the following steps. Look at the voltage rank marking

that is on the DMD itself. Referring to this marking, set the DIP switches on the formatter PWB. And connect this PWB

to the optical engine. Wrong settings will adversely affect the system performance.

Set the formatter PWB switches according to the Bin voltage shown on the back face of the DMD.

2Based on Bin voltage, switch is set up as follows.