Specifications

38
Operating with the Remote Control
Freezing a Moving Image
Press hFREEZE.
• The projected image is frozen.
Press hFREEZE again to return
to the moving image from the cur-
rently connected device.
1
2
FREEZE button
IRIS button
Switching the Iris Setting
This function controls the quantity of
the projected light and the contrast of
the image.
Press lIRIS.
• Each time the button is pressed while the dis-
play is on, the mode is switched in the follow-
ing order:
HIGH BRIGHTNESS MODE
HIGH CONTRAST MODE
Selecting the Picture Mode
Press kPICTURE MODE.
• When pressing kPICTURE MODE, the picture
mode changes in the following order:
You can select the appropriate picture
mode to best match the projected im-
age you are watching.
• See page 43 for details on the picture mode.
Note
Standard Dynamic
Movie2 Movie1Memory
Natural
PICTURE
MODE button
• For details on Iris, see page 45.
Note
DT-510_EN_i 06.10.18, 7:08 AM38