Manualshelf

User Manual

ManualsBrandsSharp ManualsDVD PlayerDV-560H
11121314151617181920
15
GB
Before you use this DVD player, specify the five settings described below.
TV/MODE SET ......... Specifies the settings for the type of TV connected and the playback format for wide-
screen video material.
SPEAKER ................ Specifies the settings for the number and type of audio components and speakers
connected, and for whether the DVD is connected to a TV or a stereo system.
PARENTAL ............... Use this setting for playing DVD discs on which PARENTAL levels have been recorded.
• Sets or changes the parental level (1 to 8).
• Used to set or change the password used to prevent the parental level from being
changed too easily.
PRO LOGIC............. Use this setting for playing discs recorded using Dolby Pro Logic via an analogue connection.
SUBWOOFER.......... If you selected “5.1ch” in the previous SPEAKER setting, set this setting to ON or OFF
depending on whether or not you are using a subwoofer.
• The OSD (On Screen Display) screens used in this Operation Manual are purely for the purposes of explana-
tion. The actual displays (set displays) may differ slightly from what is shown here.
Setup
TV/MODE SET Setting
1
While the DVD player is stopped, press the SETUP button on
the remote control to view the SET UP screen.
SET UP
TV /MODE SET
SPEAKER 2ch / D IGI TAL
PARENTAL LEVEL
:
8
PRO LOG I C O N
SUB
W
OOFER O N
4 3:
LB
2 Use the ' or " button in the remote control cursor controls
to move the screen cursor (
_
) to TV/MODE SET.
SET UP
TV /MODE SET
4 3:
LB
3 Use the \ or | button in the remote control cursor controls
to select
4
:
3
PS
,
4
:
3
LB
or
16
:
9
.
•
4
:
3
PS
— (Pan & Scan mode): When wide-screen video
material is played, this mode clips the right and left sides of
the image so that it can be viewed on a conventional TV
screen.
• Some wide-screen (DVD discs) that do not permit Pan & Scan
mode playback are automatically played in letterbox mode
(black bands top and bottom).
•
4
:
3
LB
— (Letterbox mode): When wide-screen video
material is played in this mode on a conventional TV screen,
black bands appear at the top and bottom of the screen.
•
16
:
9
— (Wide-screen TV): This is the correct mode for playing
wide-screen videos on a wide-screen TV.
• You must also set the screen mode on your wide-screen TV to
“FULL”.
4 Once you have completed the settings in step 3 above, press
the ENTER button on the remote control to confirm the TV/
MODE SET setting. The normal screen then reappears.
If you intend to go on and specify other settings (SPEAKER,
PARENTAL, PRO LOGIC or SUBWOOFER), press the ENTER
button once when you have completed all the settings.
Only displayed when
SPEAKER is set to
“5.1ch”. This is not
displayed when “2ch/
DIGITAL” is selected.