Manualshelf

User Manual

ManualsBrandsSharp ManualsDVD PlayerDV-560H
11121314151617181920
GB
16
LR
SL
SR
C
SW
Setup
LR
SPEAKER Setting
5 Use the ' or " button in the remote control cursor controls
to move the screen cursor (
_
) to SPEAKER.
SPEAKER 2ch / DI GI TAL
SET UP
TV /MODE SET
4 3:
LB
6 Press the \ or | button in the remote control cursor controls
once to display a schematic diagram of the current speaker
setup.
:
SELECT
SET UP
TV /MODE SET
4 3:
LB
SPEAKER 2c h / DI GI TAL
R
L
Select “2ch/DIGITAL” or “5.1ch” as the speaker system type.
• 2ch/DIGITAL — Select this
option when you are con-
necting to the audio input on
a stereo TV or to audio
equipment that uses 2
speakers.
• Digital Output:
Always use the “2ch/DIGITAL” setting if you are using the
OPTICAL DIGITAL OUT or DIGITAL OUT connectors.
• For a monaural TV, use the “2ch/DIGITAL” setting.
CAUTION
• If you are connecting to 2-channel audio equipment or a TV
(connected to AUDIO OUT “FRONT”), do not select “5.1ch”
as this could result in damage to your speakers at high
volumes.
• 5.1ch — Select this option
when you are connecting to
audio equipment that uses 6
speakers.
(2 front speakers, 1 centre
speaker, 2 surround speak-
ers and 1 subwoofer)
• Analogue Output:
Always use the “5.1ch” setting if you are using the AUDIO
OUT “FRONT”, “SURROUND”, “CENTER” or “SUBWOOFER”
connectors.
7 Press the \ or | button in the remote control cursor controls
to select the number of channels (“2ch/DIGITAL” or
“5.1ch”).
• If your speaker system does not match the schematic OSD, you
will not be able to play back the true original sound. In this event,
use the “2ch/DIGITAL” setting.
8 Once you have completed the settings in step 7 above, press
the ENTER button on the remote control to exit the setup
procedure. However, if you want to specify other settings,
proceed to step 9 without pressing the ENTER button.