User Manual
GB
42
L
+
R
L
+
R
Audio Selection
<DVD Discs>
• This function can only be used for discs on which the sound has been recorded in multiple formats.
• On some discs, the sound is recorded in both Dolby Digital (5.1 channels) and Linear PCM. Use the procedure
below to select the type of playback.
1 While a disc is playing, press the AUDIO
button on the remote control to show the current audio format
number.
• While the audio format number is displayed, press the AUDIO
button (or the ' or " button in the cursor
controls
) to switch to the next audio format number in the sequence of audio formats recorded on the
disc. Playback then continues in the new audio format.
<Video CDs and Audio CDs>
Three types of playback are available for VCD discs and CD discs.
1 While a disc is playing, press the AUDIO
button on the remote control to show the current playback type.
• Press the AUDIO
button to change the type of Audio playback. The Audio playback changes as follows:
1
1 / 3
If no button is pressed within 10
seconds, the indicator goes off.
DVD
VCD
CD
STANDBY
PROGRAM
PRO LOGIC
TITLE
CHAPTER TOTAL TIME
DIGITAL
VIRTUAL
DOLBY
Recorded audio format number changes
sequentially.
• If only one audio format is recorded, the
number does not change.
(The maximum number of audio formats stipu-
lated by the manufacturers is 8/8.)
Lights when Dolby Digital sound is used.
(Does not light for linear PCM.)
L+R L R
If no button is pressed within
10 seconds, the indicator goes
off.