Channel Setting Power supply on/off button When the main power button Ol fs pressed on, your TV set enters: In standby mode {power indicator lights red) or program mode (power indicator lights green) ls TV memorizes the mode which has been memorized when it was switched OFF by main power button.
After preset has been performed The following features are available for preset channels: (® Fine Sunning When a preset programmer channel Is not exactly tried, you can fine tune the channel in this mode. 1. Select the programmer channel number you want ta tune using the 0 1o 8 digit bunions or the channel selector buttons, 2. Press the Menu button, 8. Select Programmer Menu with Cursor up/down button, Press the Menu button again, 5.
Picture Adjustment @ Picture Setting Mode Picture duality (PICTURE BRIGHTNESS, PICTURE CONTRAST, PICTURE COLOR, PICTURE TONE) are adjustable in this mode. 1. Press the Menu button. 2. Select Picture Menu with Cursor up/down button, (A, V). 3. Press the Menu button again. 4. Select a parameter from the st, pressing the Cursor up/down button, (A, V) 5. Adjust the picture quality to your liking with the Cursor left/right bunion, Repeat the above steps 4 and 5 to adjust other parameters.
Features setting mode . this made, you can select a languages for screen menus, set the oft-timer and on-timer, and view the all functions implemented in your TV get demonstration, @ Language With this function, you can select a language for on-screen menus; select from English, Dutch, German, French, Hegelian or Spanish. 1. Press the Menu button. . Select Features Menu with Cursor up/down bitten, Press the Menu button again. . Pressing Cursor up/down bunion, select LANGUAGE. .
!! Other Features (® channel call button (3. Press the butt onto display the current channel number and the sound mode on the screen. The name, If it has, the remaining time for the off-timer, the real-timer and the on-timer, if they have been set, is also displayed on the screen. Press the button again to make the on-screen display disappear. If the channel you are viewing has been set to be skipped with the channel skip function, the programmer number and the name, if it has, are displayed in red.
3. Enter the teletext page number using the 0~8 digit buttons (enter three digits) or the channel selector buttons. 4. Repeat steps 2 through 3 until the numbers for the desired pages have bean entered. 5. Press the store button memorize the page numbers If you want. The colored brackets change to white, 8. Press the picture button to exile the teletext mode. b) Fast Page Selection Select the appropriate programmer channel. Press the TEXT/MIX/PICTURE button once to rents the teletext mode.
! (D Double Page button (DP) This function shows in the screen the page actually selected 2 times: In double page mode it is possible to select any other page {using numbers, color keys or i channel up/down keys). PAGE 100 PAGE 100 The new page appears in the left side: T SRz PAGE Pageant Fa GE 100 eV PAGE Iris very useful to have an index page on the right side because in it, usually we have the page numbers related with the subject we are seeing.
Typical connection (VCR/Disc and TV} through the 21-pin Euro-SCARY Please refer to the operation manual of your VCR for details, Note: *-When the audio output signals is mono, select the MONO mode with the Typical connection (VCR and TV} through the RF terminal VCR out 21-pin AV Terminal Speaker Speaker Personal computer 21-pin Eur-SCART Typical connection (Disc and TV} through the 21-pin Euro SCARY e | E® Video Out J Audio Out Speaker sound mode selector, and you will hear sound from both speakers of the T
A 1. Die Teletext/Fernsehbild/Kombinationstaste (=7 / zur Einstellung der Teletext-Betriebsart drucken. 2. Eine farbige Taste entsprechend den farbigen Klammern auf dem Bildschirm zum Speichern der Seitennummer drinstecken, 3. Die Teletext-Seitennummer mit den Zahlendtaten 0~9 (drei Stellen eingeben) oder den Kanalwahl-Tasten eingeben. 4. Die Schritte 2 und 3 wiederholen, bis alle Nummern der geschienenen Seiten hingegeben wurden. 5.
Het instellen van de kanalen Het aan-en uitschakelen van det netvoeding Indien de algemene aanzetknop Ingedrukt wordt, komt uw televisie in de stand-by-stand {wachtstand) {rood lichtje brandt) of in de programma-stand {groen lickie); de TV smaal de stand die bij het UITSCHAKELEN via de algemene aan/uftkriop ingesteld stond, in zijn geheugen op.
Nadat de voorkeuze-instelling is verricht Er zin de voigande mogsliikheden voor de voorkeuzezenders: (® Lijnafstemming (Fine Tuning) Wanner een voorgeprogrammeerd kanagd nier scherp s afgesteld, kun u het kanaal en deze functie bijstellen, 1. Kies het kanaalnummer dat 1 wenst aften stemmen door op een cijfertoets van drukken of op de kanaalkeuze toetsen Druk op de Menu-toets. . Kies een Programma-menu via de Druk opnieuw op de Menu-toets. . Klijs fijneafstemming (F-TUNE) door op de drukken.
Beeldinstelling Beeldenstilstand De beeldiowaliteit (HELDERHEID, CONTRAST, KLEUR, SCHERP) is in deze functie bij te stellen, 1. Druk op de Menu-toets. 2. Kies Beeldmenu met de Druk nogmaals op de Menu-toets. 4. Kies een parameter uit de [ijst door op de (4, ¥) te drukken. .
Functie-instelling Hiermee kunt ¢ een faal voor de beeld-menu’s functies aanschouwen waarover uw TV beschikt. @ Taal Mst deze functie kunt u een taal Kitzen voor de beeldmenu’s; maak sen keuze uit Engels, Frans, Italiaans of Spaans. 1. Druk op de Menu-toets. 2. Kings het Standen-menu (Features) via de Druk nogmaals op de Menu-toets. 4. Kies esn TAAL door op de drukken. zen, de zfzeten aanzet-timer instellen en al Nederland, Duits, . Druk op de rechts toets () om de keuze-box te activeren.
Andere functies @ Kanaaloproep-toets { {5 ). Druk op de toets om het voorliggende kanaalnummer en de geluids-stad op het scherm te doen verschijnen. De naam, de resterende tijd van de afzet-timer, de reële tijdklok en de aanzet-timer, indien ingesteld, verschijnen eveneens op het scherm, Druk opnieuw op de toets om gon ander van het veelt te doen verdwijnen.
3. Breng met behulp van de 0~9 cijfertoetsen of de kanaalkeuzetoetsen het paginanummer in (3 cijfers}. 4. Herhaal handelingen 2 en 3 tot de nummers van de gewenste pagina's zijn ingebracht. Zet, indien gewenst, de paginanummers in het geheugen door de opslagtoets drukken. De gekleurde kadertjes veranderen in wit. Druk de beeldtoets in als u uit het toletakst wilt. 5. 6, b) Snelle paginakeuze Kies het gewenste programmakanaal.
A @ Dubbele Pagina toets (DP) Deze functie toont de gekozen pagina 2 maal op het beid. PAGINAIOC BAGNO 100 In dit geval worden de menu-opties uligewlst. In de dubbele pagina-stand is het mogelijk andere pagina’s te kiezen (middels nummers, Kleurtoetsen of kanaal omhoog/omlaagtoetsen). T DEZELFDE VAGINA De nieuwe pagina verschijnt dan aan de linkerkant: oAGN 222 PAGINA 100 HEUSE PARIA Het is zeer handig om de inhouds-pagina aan de rechterkant te hebben, want daarop sten gewoonlijk de paginanummers m.b.t.
Réglage des canaux Interrupteur d’alimentation contremarche Larronnesse appuie sur la touche d'alimentation principale alpha, Ol 'appareil de révision entre dans la modalité stand-by (Indicateur d’alimentation s’allume en rouge) ou dans la modalité de programmé (Indicateur d’alimentation s'allume en vert); la télévision mémorise la modalité qui a &t& mémorisée au moment ol ON A reconnecte 4 Aide de la touche d'alimentation principale.
Quand le préréglage est terminé Les fonctions suivantes sont disponibles pour les canaux préréglage; @ Réglage fin Sl I'in des canaux présélectionnées n’est pas ben réglé, vos pouvez procéder comme suit au réglage fin: 1. Sélectionner ie numéro du canal & régler & Aide des louches numériques des touches de sélection de canal Appuyer sur ta louche Menu. . Sélectionner lo menu du programme & Aide des touches du curseur en haut/en bas (A, .
Réglage de 'image @ Mode de réglage de Image La qualité de Image {LUMIÈRE, CONTRASTE, COULEUR, DÉFINITION) ets réglable dans ce mode. 1. Appuyer sur [a touche Menu. 2. Sélectionner le menu Image 4 'aide des touches de curseur en haut/en bas {A,Y) 3. Appuyer & nouveau sur la touche Menu, 4. Choisir un paramétré dans la liste 2 'aide des touches de curseur en haut/ on bas (4, V). 5. Régler la qualité de limage a votre soft a Aide des touches de curseur en haut/ entas 6.
! Autres caractéristiques ® Touche d"appel de canal (3. Appuyer sur cette touche pour afficher le numéro du canal actuel of le mode son, p’tits ont 616 réglés, le nom, s’il existe, le temps avant la déconnexion temporisée, Is système de temporisation réelle et le système de connexion temporisée sont également affichés & I'écran. Appuyer une seconde fois sur cette touche pour effacer l’affichage.
e e Appuyez sur la touche texte/mélange/image pour entrer en mode télétexte. 2. Appuyez sur une touche de la couleur correspondante & celle des parenthésés sur Écran pour mémoriser le numéro de page. Entrez le numéro de page télétexte & l'aide des touches numériques {entrez trois chiffres) ou des touches de sélection des canaux Répétez les étapes 2 a 3 jusqu’a ce que les numéros de page désiras soient entrés. 5. Appuyez sur la touche de mémorisation pour mémoriser les numéros de page.
f ( Touche double page {DP} Cette fonction permet d’afficher deux fois a I'écran la page sélectionnée. Dans ce cas, les options du menu sont effacées, Dans le mode double page, 1 est possible de sélectionner n'importe quelle autre page (en PHAGE 100 PAGE 100 utilisant les chiffres, les touches de couleur ou fes touches canal La nouvelle page apparaît & gauche: e SEMER PAGE ORGE 222 Page 100 NOUVELLE PASSE.
Regolazione immagini yang E verde E @ Modo impostazione immagini La qualità immaginane (LUMINOSITÀ, CONTRASTO, COLORE, DEFINIZIONE) verdi | magie | yen | immagine | puoi essere regolata nel seguente modo: Sceglierà -y Suono 1. Premere il tasto Menu. 2. Cof tasto di controllo del cursore sugosità selezionare it End di 3. Premere altura volta il tasto Menu. N 4.
If Altre caratteristiche di funzionamento @® Tasto dei canali Premere il tasto per visualizzare sul teleschermo il numero del canale che si sta vedendo e la modalità di suono. Sul teleschermo appare anche il nome, se esiste, it tempo rimanente per lo spegnimento tempri zito, it tempo real e 'accensione temporizzate, se sono stati regolata, Se Il canale che si sta vedendo & stato selezionato con la funzione SLIP (salto di canale}, it numero di programma ed il nome, se esiste, saranno visualizzati in rosso.
e e — 1. Premere il tasto TELETEXT/MISTO/IMMAGINE / (2 per selezionare il modo di televideo. 2. Premere un tasto colorato corrispondenti alle parentesi sullo schermo per memorizzare il numero di pagina. 3. Digitare il numero di pagina utilizzando i tasti da 0~ (con tre cifre) o il tasto di selezione canale P25 1603 4. Ripetere le operazioni 2 a 3 fino a quando | numeri per le pagine desiderate 5 75 sono stati memorizzati. 5. Premere il tasto STERO ( €3 ) per memorizzare | numeri.
f i @ Tasto Doppia Pagina (DP) Questa funzione mostra sul teleschermo 1a pagina attualmente selezionata 2 volte. PAGINA | | IMPAGINATO in modo doppia pagina & possibile selezionare qualsiasi alari pagina (utilizzando numeri, codici di colori o tasti di canale TEGEA PAGINA La nuova pagina appare sul lato sinistro: PAGINA 222 PAGA 100 IVA PAGINA E molto otite avere la pagina dell'indice sul lato destro dato che in essa spesso ci sono | numeri di pagina relazionati col soggetto che stiamo esaminando.