User Manual

15
GB
SETTING UP
Web-site:www.sharp.co.uk/support Help line:0990 274277 (office hours)
Connection
Caution:
• Be sure to turn off the Player and equipment to be connected before connecting.
• Read through the operation manual for the equipment to be connected.
• Be sure that the colours of the jacks and plugs match up when using a VIDEO/AUDIO lead (commerially available) .
• Be sure to keep the Player connection leads separate from the TV aerial lead when you install the Player,
because it may cause electrical interference when you are watching television programmes.
Connecting a TV with AV 1 (TV) Output and AV 2 Input SCARTS
Use the SCART leads (one SCART lead: supplied) to connect the Player to your TV and VCR.
DIGITAL
OUT
OPTICAL
DIGITAL OUT
AV 1
(
TV
)
VIDEO
S-VIDEO
RGB
AV 2
S-VIDEO
OUT
OUTPUT
SELECTOR
VIDEO
OUT
AUDIO
OUT
L
R
TV
VCR
DVD Player
To SCART
output
To AV 2
SCART
To AV 1 (TV)
SCART
Change the position according to
the signal type (VIDEO/S-VIDEO/
RGB) that is output to TV.
To SCART
input
SCART OUTPUT
The factory default setting for the OUTPUT SELECTOR is “VIDEO”. If your TV supports the higher quality
modes S-VIDEO or RGB via the SCART, then please set the selector for your preference.
Required leads
SCART lead (the other SCART
lead: commercially available)
SCART lead (one SCART lead:
supplied)
: Signal flow