User Manual

GB
30
SETTING UP
Web-site:www.sharp.co.uk/support Help line:0990 274277 (office hours)
AUDIO SETUP Setting
COMPRESSION ............ Use this setting for increasing the average
volume of Dolby Digital audio when playing a
DVD.
DIGITAL/MPEG ...... Use these settings for specifying the type of
digital output when playing a disc recorded
using Dolby Digital/MPEG Audio.
Setting the COMPRESSION
(Dolby Digital output level)
When Dolby Digital is used to record the audio on a DVD, the average
overall volume level of the audio is relatively lower than that produced
by a VIDEO CD/Audio CD. This is to provide the widest possible
dynamic range. To counteract this, your Player automatically raises the
overall average volume level of a disc recorded using Dolby Digital to a
level that is similar to that of a VIDEO CD/Audio CD.
• OFF.............. Audio level recorded on disc is played back without
modification.
• ON ............... Dolby Digital average audio level is increased so it
sounds similar to that of a VIDEO CD/Audio CD.
1 Press SETUP to display the SETUP screen.
2 Use ' or " to select the “
AUDIO SETUP”.
AUDIO SETUP
COMPRESSION: OFF
MPEG:
DIGITAL: BITSTREAM
BITSTREAM
COMPRESSION:
OFF
COMPRESSION:
ON
• Low audio level
VIDEO CDs
Audio CDs
•
Audio level the same
as Audio CD, etc.
MC
OPEN/
CLOSE
OPERATE
SETUP
ZOOM
ON
SCREEN
AUDIO
TITLE
MENU
VIRTUAL
FUNCTION
CONTROL
SUBTITLE ANGLE
RETURN
REV FWD
ENTER
REPEAT
A B REPEAT
PROGRAM
DIRECTCLEAR MEMORY
PAUSE
RESUME
SLOW
F.ADV SLOW
STILL
DVD VIDEO PLAYER
PLAY
STOP
DISPLAY DIMMER
SKIP SKIP
DVDs
Dolby Digital audio
Setup