User Manual

GB
32
SETTING UP
Web-site:www.sharp.co.uk/support Help line:0990 274277 (office hours)
Setup
Setting the MPEG
• Before setting the “MPEG”, perform the step 1 to 2 on page 30.
1 Press ENTER and then use ' or " to select “MPEG”.
• The background colour for the selected item changes to
orange.
2 Press ENTER to display the settings you can select.
AUDIO SETUP
COMPRESSION: ON
MPEG:
PCM
BITSTREAM
BITSTREAM
BITSTREAM
DIGITAL:
3 Use ' or " to select “BITSTREAM” or “PCM”.
• The factory default setting is “BITSTREAM”.
BITSTREAM: Use this setting for a digital connection of a
receiver (amplifier) equipped with an MPEG
Audio decoder.
PCM: Use this setting for a digital connection to the
PCM digital input jack of a DAT or MD, or for a
digital connection to a receiver (amplifier) that
does not have an MPEG Audio decoder.
4 Press ENTER to confirm the setting.
5 Press RETURN to exit the SETUP screen and return to normal
screen.
• If you want to go on and specify other settings, use ' or " to
display the other SETUP screen without pressing RETURN.
When playing a disc recorded using DTS, the bitstream type
signal is output regardless of the setting of “ DIGITAL” and
“MPEG”.
MC
OPEN/
CLOSE
OPERATE
SETUP
ZOOM
ON
SCREEN
AUDIO
TITLE
MENU
VIRTUAL
FUNCTION
CONTROL
SUBTITLE ANGLE
RETURN
REV FWD
ENTER
REPEAT
A B REPEAT
PROGRAM
DIRECTCLEAR MEMORY
PAUSE
RESUME
SLOW
F.ADV SLOW
STILL
DVD VIDEO PLAYER
PLAY
STOP
DISPLAY DIMMER
SKIP SKIP