User Manual

GB
40
BASIC OPERATIONS
Web-site:www.sharp.co.uk/support Help line:0990 274277 (office hours)
:
1
ZOOM
ZOOM indicator
DVD
DVD
Zooming an Image
1 While a disc is playing, press ZOOM.
• Each press of ZOOM cycles through the zoom settings in the
following sequence:
ZOOM 1 (1.2×) → ZOOM 2 (1.5×) → ZOOM 3 (2.0×) → Off.
• When playing a Pan Scan disc while
43:
P S
is selected as the
“TV MODE” setting on the “TV MODE SETUP” screen, each
press of ZOOM cycles through zoom settings in the following
sequence:
ZOOM 1 (1.2×) → ZOOM 2 (1.5×) → Off.
Note that all of the above zoom factors are approximate only.
• While an image is zoomed, you can use ', ", \ and | to
shift the view and display the part you want.
Press '.
Press \.
Press ZOOM.
Press ".
Press |.
• The zoom indicator changes from white to red to let you know when
you are trying to perform an illegal shift of view. If you are already at
the far left side of the image, for example, the zoom indicator will
become red when you press \.
• An image may become distorted when zoomed.
• You can cancel the zoom operation by pressing ËSTOP, MENU,
TITLE, FWDè, or È REV.
• The setting screen is cleared automatically whenever you display a
DVD screen that enables you to change the scene by pressing ', ",
\ or |.
• 1.2×, 1.5×, and 2.0× zoom are approximate magnification values only.
The actual image may be somewhat larger or smaller depending on
the recording system (NTSC or PAL) that was used to record the disc.
MC
OPEN/
CLOSE
OPERATE
SETUP
ON
SCREEN
AUDIO
TITLE
MENU
FUNCTION
CONTROL
SUBTITLE ANGLE
RETURN
REV FWD
ENTER
A B REPEAT
PROGRAM
DIRECTCLEAR MEMORY
PAUSE
RESUME
STILL
SLOW F.ADV SLOW
DVD VIDEO PLAYER
REPEAT
VIRTUAL ZOOM
PLAY
STOP
DISPLAY DIMMER
SKIP SKIP
DVD Playback
DVD
DVD