User Manual

43
GB
SPECIAL FUNCTIONS
Web-site:www.sharp.co.uk/support Help line:0990 274277 (office hours)
2/5
8/30
01:30:08
2
ENGLISH
1
1
5 1ch
ON
.
DVD
DVD
About the FUNCTION CONTROL Screen
Using FUNCTION CONTROL, you can check at a glance and change the current settings of the following
items: SUBTITLE, ANGLE, AUDIO and VIRTUAL DOLBY.
FUNCTION CONTROL also allows you three ways of direct skips (title,chapter and time).
• While the disc is playing, press FUNCTION CONTROL to display the screen shown below.
• Pressing ' or " changes the currently selected item whose background colour is orange.
• Numbers in refer to the pages where the setting procedures are described.
Played back image
BIT RATE indicates the
amount of data that is
being transferred to the
Player per second.
However, note that
picture quality is not
always in proportion to
the bit rate.
Currently selected item
1 Direct title skip
2 Direct chapter skip
3 Direct time skip
4 Subtitle
5 Angle
6 Audio
7 VIRTUAL DOLBY
• In FUNCTION CONTROL mode, you can return to the previous setting screen by pressing RETURN or FUNCTION CONTROL.
• You can cancel the FUNCTION CONTROL mode by pressing ËSTOP, MENU, TITLE, FWDè,
È
REV, VIRTUAL,
ZOOM, SUBTITLE, ANGLE, AUDIO or DIRECT.
• The setting screen is cleared automatically when appears a DVD screen that prompts you to change the scene by
pressing ', ", \, or |.
11
11
1
Direct title skip
• The number of the title currently played back is
displayed.
• You can skip directly to the desired title.
22
22
2
Direct chapter skip
• The number of the chapter currently played back is
displayed.
• You can skip directly to the desired chapter.
33
33
3
Direct time skip
• Elapsed time from the beginning of the disc is displayed.
• You can skip directly to the point from which you want
to start playback.
44
44
4
Subtitle setting
• The subtitle number and language currently selected
are displayed. (When a disc with only one subtitle is
played back, “xx” is displayed.)
• You can select the desired subtitle language.
55
55
5
Angle setting
• The current angle is displayed. (When a disc with
only one angle is played back, “xx” is displayed.)
• You can select the desired angle.
66
66
6
Audio setting
• The type of audio currently selected is displayed.
• You can select the desired type of audio.
77
77
7
VIRTUAL DOLBY setting
• This function provides rich surround sound by
downmixing Dolby Digital 5.1 channel and Dolby
Surround (Pro Logic) to 2-channel audio or TV.
• You can toggle the setting between “ON” and “OFF”,
and change the level.
• When “COMPRESSION” is “ON”, this function is
disabled, which is indicated by “xx”. To use the
VIRTUAL DOLBY function, set the “COMPRESSION”
to “OFF” (see page 30).
44
Operation Status indicater
44
44
45
45
45
46
DVD Playback for Special Functions
DVD
DVD