Specifications

- 26 -
ADVANCED OPERATION OF PLAYBACK
< REPEATED Playback
l TITLE/CHAPTER Repeat
When the REPEAT button is pressed, the repeated
playback is triggered and the OSD message is
changed in cycles of “CHAPTER REPEAT ON”,
“TITLE REPEAT ON”, and “REPEAT OFF.”
? CHAPTER REPEAT
Enables the repeated playback of a chapter for a DVD
disc or track for a Audio CD disc or a VCD disc.
? TITLE REPEAT
Enables the repeated playback of a title for a DVD disc
or a disc for a Audio CD disc or a VCD disc.
? REPEAT OFF
Resumes normal play.
l A-B Repeat
You are able to perform a repeated playback between
any two points of a track or a chapter.
1. Press the A-B REPEAT button during playback to set the
beginning point (A). The OSD message “A TO B SET
A “ will be shown on the right lower screen corner.
2. Press the A-B REPEAT button again to set the end point
(B). The OSD message “A TO B SET B ” will be shown.
In the meantime, the repeated playback begins
between the two points, A and B.
3. Pressing the A-B REPEAT button again resumes normal
play. The OSD message “A TO B CANCELLED” will
be shown.
SET A SET B
< PROGRAM Playback
Here the program playback function is only available for
Audio CD, or a VCD with PBC off.
l Track Program
1. Press the PROGRAM button to program the tracks for
program playback during STOP status.
2. Use the numbers on the remote control to begin
programming. Press the corresponding track number
in the same sequence as your desired playback order.
For example:
To program tracks 2, 4, 6 (in the same order), simply
press key digits 2, digit 4, digit 6 sequentially.
Set track 2 as first sequence Set track 4 as second sequence
? A number larger than 10 must be keyed by using +10
additionally. For example, “22” is keyed in by pressing
+10 twice and then 2 once.
NOTES:
i The maximum program capability is 99 tracks.
l Start/Cancel the Program Playback
? Press the PLAY button to start the program playback in
the order that you programmed it.
? Press the STOP button to stop playback, press
PROGRAM to reset program order, press PROGRAM
again to cancel the program function.
? During the program playback, the SKIP : button and
the 9 SKIP button can be used to advance to the next
programmed track or go back to the previous
programmed track.
CHAPTER REPEAT ON
TITLE REPEAT ON
A TO B SET A
A TO B SET B
PROGRAM P01: 02
PROGRAM P02: 04
PROGRAM P00: 00
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals