TILT WIDE TILT+ CLOSE DV740 SRC MUTE RPT AUX-IN DV740 CAR RADIO DVD/CD/MP3/USB/SD/MMC FM/AM With 7" TFT MONITOR Operation Instructions Please read all instructions carefully before using
Wa r n i n g s 1. Only connect this unit to a 12V DC power supply with negative grounding. 1 2. Never install this unit where the operation for safety driving is restrained. 3. Never use the video display function in the front when driving to prevent the violation of laws & regulations and also to reduce the risk of traffic accident except using the rear view video camera. 2 3 4. Never expose this unit, amplifier, speakers to moisture or water to prevent electronic sparks or fires. 5.
Precautions 1. Never disassemble or adjust the unit without any professional guide. For details, please consult any professional car shop / dealer for inquiry. 2. If the front panel or TFT monitor is dirty, please use a clean silicone cloth and neutral detergent to wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol for cleaning may result in scratching or discolouration to the appliance. 3 .
Declaration This product incorporates copyright protection technology that is protected by U.S patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation , and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited.
Contents Before using Front Panel.........................01 Auxiliary LCD......................02 Remote Control...................03 Basic operations Power on/off....................... 05 Mute.................................. 05 Volume adjustment..............05 Open SOURCE MENU.........05 Playing source selection......05 Display system time............ 06 Using the TFT monitor..........06 Reset the unit..................... 06 Radio mode Select radio as playing source...............................
Contents Search for a particular file.... 19 GOTO search..................... 19 Zoom in/out........................ 19 Rotate picture..................... 19 Select picture slide mode..... 19 Playback information display............................... 19 Other modes AUX................................... 20 Camera.............................. 20 Setup Setup procedures................ 21 General.............................. 21 Language........................... 22 RDS...................................
Before using Front Panel ② ① 15 14 16 ① 15 ② 14 ③ ⑬ ④ ⑤ RPT ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ 1. [AS/TILT+] Key: Auto Save / Increase display angle 2. [BAND/TILT-] Key: Change radio band / Decrease display angle 3. [ ] Key: Remove the front panel 4. [VOL] Knob Key: Adjust volume/ Play or pause(short press) 5. Reset the unit 6. [ /SRC] Key: Unit power / Switch to the current mode and main menu 7. [MUTE] Key: Mute audio outputs 8. [RPT] Key: Enter the repeat mode 9.
Before using 13. Eject disc 14. [OPEN/Close] Key: Open / Close the TFT monitor 15. [DISP/WIDE] Key: Display information / Change display mode Auxiliary LCD 5 LOUD 1 2 3 4 1. Disc indicator Light up when one disc is inside; Light off when no disc is inside. 2. Repeat mode indicator Light up when repeat mode is on; Light off when repeat mode is off. 3. Main display area Display characters, playback time, tuning frequency, clock and other text information. 4.
Before using Remote Control Introduce of key functions 1 15 2 16 3 17 4 5 18 19 20 6 BAND 21 7 8 9 EQ 10 OPEN/CLOSE CLEAR 28 29 11 12 22 23 24 25 26 27 30 TILT 13 INT 14 RPT * 31 32 Note: Your remote control may differ slightly from the one pictured here. The above diagram is for illustrative purpose only. 03 1. [SRC]Key: select playing s ource 2.[EJECT]Key: Eject disc 3.[AUDIO] Key: Select DVD dialogue language 4.[VOL+/-] Key: Adjust volume 5.[ZOOM] Key: Image zoom in/out 6.
Before using Notes of remote control using 1) Aim the remote control at the remote sensor on the unit. 2) Remove the battery from the remote control or insert a battery insulator if the battery has not been used for a month or longer. 3) DO NOT store the remote control under direct sunlight or in high temperature environment, or it may not function properly. 4) The battery can work for 6 months under normal condition. If the remote control can't work, please change the battery.
Basic operations Power on / off Press any key on the front panel or the [POWER] key on the remote control to turn on the power under standby mode. The unit goes back to the last status after power on. Press and hold the [SRC] key on the front panel or press the [POWER] key on the remote control to turn off the power under work mode. Mute Press the [MUTE] key on the front panel or remote control to mute the volume from the unit.
Basic operations Display system time Press and hold the [DISP] key on the front panel to switch the display information between system time and playing source when the TFT monitor is closed. Using the TFT Monitor Open / Close monitor Press the [OPEN/CLOSE] key on the front panel or remote control to push the display panel out or in. Change the monitor tilt angle Due to the inherent character of LCD, you will get different vision impression s when you watch it from different angles .
Radio mode Select radio as playing source Open the SOURCE MENU and then touch RADIO. Select one radio band Press the [BAND] key on the display panel or remote control or touch the [BAND] icon on the user interface to select one radio band among FM1, FM2, FM3, AM1 and AM2. Auto tuning Press the [ ]/[ ] key on the display panel or remote control or t ouch the [ ] / [ ] icon on the user interface to seek a higher / lower station.
Radio mode . Manual save When one expected radio station has been detected…… (1) Press the [ MEM ] icon on the user interface and the preset menu will be opened. (2) Press one preset button among P1~P6. (3) If you want to abort, press the [Exit] button. Preview scan Preview scan searching is such a process that the searching pauses when a station is received and then played for 5~10 seconds. After being played, the unit continues the process until the whole band is detected.
RDS operations The unit provides basic functions of RDS, including PI (Program Identification), radio station name , RT (Radio Text), CT (Clock Time), AF (Alternative Frequency), TA (Traffic Announcement) and PTY (Program Type) Selection. AF function Alternative Frequencies Lists are used for the same program service and used in conjunction with the PI code (Program Identification code) to assist automatic tuning.
RDS operations PTY function PTY is the abbreviation for Program Type which is a code defining the type of program being broadcast (e.g. News or Rock). Six PTY options will display on the screen. To view more PTY options, touch the scroll bar and arrows on the screen. When one PTY option is touched (e.g. News), auto search for next available PTY by increasing tuning frequency until the PTY of the next station matches the current.
Disc mode Insert a disc Upon inserting a disc, the unit will switch to disc mode automatically. Notes: ① Please confirm whether there is a disc in the unit before you insert another one. ② Some recorded discs, such as CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW cannot be played back because of different recording status. Otherwise, the discs without being closed could not be played back. ③ About the cautions of disc using, please refer to the appendix. Eject the disc Press the [ disc.
Disc mode Onscreen control buttons Disc type MP3/WMA CD Numeric keypad Numeric keypad Setup menu Setup menu / / DVD MPEG Picture Numeric keypad Numeric keypad Numeric keypad Setup menu Setup menu Setup menu Fast forward Fast forward Fast forward / Fast rewind Fast rewind Fast rewind / Previous Previous Previous Previous Previous Next Next Next Next Next Play / Pause Play / Pause Play / Pause Play / Pause Play / Pause Stop Icon Stop ■ 1/2 2/2 + Stop Stop A second
Disc mode Suspend playback Press the [ ] key on the front panel or remote control or open the onscreen control buttons menu and then touch the[ ] button. To resume normal play, repeat the above operation. Stop playback To stop playback, press the [■] key on the remote control or open the onscreen control buttons menu and then touch the[■] button.
Disc mode Repeat playback Press the [RPT] key on the remote control repeatedly or open the onscreen control buttons menu and then touch the [ ] button repeatedly to alter repeat mode according to the following table.
Disc mode Direct search When a DVD or CD disc is played back, you can search for a particular chapter / track by pressing the numeric keys of the remote control. For example, if you want to select the 15 th track, you should press numerical key [1] and [5]. GOTO search (1)Enter GOTO search mode Press the [GOTO] key on the remote control to open search menu. For DVD, you can search according to title, chapter and time. For CD, you can search according to track.
Disc mode Select multi-angle views Press the [ANGLE] key on the remote control repeatedly to choose a s hooting angle during the playback of a DVD disc or video file containing multi-angle views. Select audio channel For DVD containing multi-language audio files, press the [AUDIO] key on the remote control repeatedly or open the onscreen control buttons menu and then touch the [AUDIO] button repeatedly to change dialogue language.
Disc mode Playback information Touch the top center area of TFT LCD when playing back DVD disc and the playback information will be displayed on the top area of the TFT. For DVD 1 2 3 4 5 6 7 8 DVD Video Time 00:00:59/00:00:43 Title 5/8 Chapter 2/16 Audio Subtitle Angle Bitrate 2/6 6 ch Eng Off 1/1 0.000Mbps (1) Disc type. (2) Elapsed time of the current title. (3) DVD Title information. “5/8” indicates that this DVD has 8 titles and the title playing back now is the fifth title.
SD/USB mode Select SD/USB as playing source Method 1: (1) SRC SRC Repeatedly Repeatedly remote control front panel ( 2 ) Select ' SD ' or ' USB ' on screen. Method 2: Open the 'SOURCE MENU' and then select ' SD ' or 'U SB ' . Notes : ① The unit will switch to SD card mode or USB mode after a SD card or USB device has been inserted . ② The unit supports hot swap. Using the touch screen controls The operation is the same as DVD mode .
SD/USB mode Play the next or previous file The operation is the same as disc mode. Repeat playback The operation is the same as disc mode. Random playback The operation is the same as disc mode. Intro playback The operation is the same as disc mode. Search for a particular file The operation is the same as disc mode. GOTO search The operation is the same as disc mode. Zoom in/out The operation is the same as disc mode. Rotate picture The operation is the same as disc mode.
Other modes AUX External peripheral devices with RCA audio and video outputs can be connected with the unit. To enter AUX IN mode, open the SOURCE MENU and then touch AUX IN. AV TO AUDIO cable description in here and also explain the wiring diagram. Insert one socket of the AUDIO cable to slot of the [AV IN] on the front panel ,another to connect to the AUDIO device (as belown the picture). AV of the front panel Connect to AUDIO device C amera This player is “camera ready”.
Setup Setup procedures (1)Enter setup mode Press the [SETUP] key on the remote control or touch the setup icon [ ] on the user interface. The following menu appears after entering the setup mode. The GENERAL sub-menu is highlighted by default. SETUP MENU RDS Rating Hardware P.VOL TS CAL General Language Clock Mode 12Hr Clock 11:18 Audio Back AM Tuner Region Europe Beep Off (2)Select one sub-menu Press the direction keys on the remote control.
Setup Language ● OSD Select one language of system menu display. ● DVD Audio Select one dialogue language of DVD disc. Note: If the DVD disc does not contain the selected language, the dialogues you listening to will be in default language. ● DVD Subtitle Select one subtitle language of DVD disc. Note: If the DVD disc does not contain the selected language, the subtitle will be displayed in default language. ● Disc Menu Select one language of DVD MENU display.
Setup Rating Some DVD discs have built-in parental lock which prevents children to watch some scenes as force or eroticism especially. ● Set Password The original password of the unit is null . You should set a new password ASAP. Method of changing password: (1) Open the parental lock Touch the 'Password' option directly to open the keypad, touch the numeric buttons to enter your old password (initial password for the first time) and then confirm by touching the [Enter] button.
Setup Procedures of changing the rating: (1) Open the parental lock According to the same method mentioned in the first step of changing password. ( 2 ) Change the rating Select an appropriate rating from the 'rating' list. ( 3 ) Close the parental lock Repeat the operation of the first step to enter a 4-digit password (old or new) and then confirm. The parental lock is closed. ● Load Factory To restore the default settings relating with DVD playback (e.g.
Setup P.VOL P.VOL means Programmable Volume. You can balance the volume among different audio sources using this function. ● Source Select one playing source that you want to set relative volume. ● Level You can set relative volume level from -6 to 6. TS CAL When the touch function is not sensitive or valid, you should calibrate the touch screen by this function. Calibrate the touch screen just following the screen introductions after entering the TS CAL mode.
EQ Audio control allows you to easily adjust the audio system to get the best possible sound effect. ( 1) Enter the EQ setup mode Press the [EQ] key on the remote control or touch the EQ icon in the user interface and the following interface will display on the screen . EQ selection EQ +14 BAL-FAD USER + + + 0 + F 0 -14 R L EQ parameters - - - BASS MID TREB -14 - Fader / Balance adjustment area R SUB ( 2) Select EQ mode Touch the EQ selection bar repeatedly and the EQ mode will change.
Troubleshooting What appears to be trouble is not always serious. Please check the following points before calling a service center. Problem Cause Corrective action General Unit can not power on Remote control does not work No/low audio output Poor sound quality or distortion Tel-Mute malfunction Unit fuse blown. Install new fuse with correct rating. Car battery fuse blown. Install new fuse with correct rating. Illegal operation Reset the unit. Battery depleted. Change the battery.
Troubleshooting 常见故障排除向导 (Continued) Problem Cause Corrective action Disc playback Cannot insert disc Disc does not play back A disc inside the unit already. Eject current disc and insert new one. Disc is warped or scratched. Use disc in good condition. Disc is dirty or wet. Clean disc with soft cloth. Incompatible disc is used. Use compatible disc. Disc is inserted upside down. Insert disc with label side up. Disc region code is not compatible with unit. Use disc with proper region code.
Device connections Notes of connection This unit is designed to be used in a vehicle with a 12-volt battery and negative grounding. Before installing this unit to a recreational vehicle, a bus, or a truck, make sure the battery voltage is appropriate for this unit to be used, otherwise, install a transformer by professional to convert the output voltage to 12V. To avoid short circuit in the electrical system, ensure that the negative battery cable is disconnected before installation.
Device connections Control Cables Auto Brightness Control To avoid the display being too bright at night time, if the headlight cable is connected to ILLUMI, turning on the headlight will dim the backlight of the TFT LCD and vice versa. Telephone Mute If the MUTE cable is connected to a car phone, other audio outputs mute when one call is received by the car phone.
Device connections Parking Brake Cable Connections Parking Brake Lead Green Wire 2A Battery Brake Light Parking Brake Switch Car Frame Parking Brake Switch Reverse Driving Cable Connections Reverse Driving Signal Light Car Frame Pink Cable Reverse Driving Cable Car Battery P R N D 2 L Gearbox 31 Car Frame
Installation and uninstall Notes of installation 1) Before installation, please make sure proper connections are conducted and the unit operates normally. Improper connection may result in damage to the unit. 2) Use only accessories designed and manufactured for this unit and other unauthorized accessories may result in damage to the unit. 3) Before installation, please fasten all power cables.
Installation and uninstall Dashboard Rubber Sheath M5 X 24 Mounting Bracket M2 X 2 Long Assemble Bar (Picture 2) ( 4 ) Insert the unit into the bracket, fasten the M4×6 screw to the fireproofing board available at the back of the dashboard, and use 4 pieces of M2×2 screw to lock the assemble bars and the mounting bracket in position. Note: According to the depth of the opening, use different length of assemble bar accordingly.
Installation and uninstall The assembly step of detached panel 1、Press this button,It's ok when heard "KA KA". 2、Grasped the right-end of the knock-down panel, you can remove the panel by upward direction, which is like the following picture.
Installation and uninstall The assembly step of detached panel 1、Put the knock-down panel on the fixed panel by downward direction. 2、(1) Before the next assembly, DVD-6666M make sure this place is ok. RPT (2) This complexion is NG. DVD-6666M RPT 3、Pressed both sides of the knock-down panel, make sure it's OK.
Installation and uninstall Trim Ring installation Attach the trim ring around the front panel with two indentions on one side facing upwards Uninstall Disassemble trim ring (1) Push the trim ring upward and pull out the upper part. (2) Push the trim ring downward and pull out the lower part. Disassemble the unit (1) Unscrew the 4 pieces M2×2 screws. ( 2 ) Use a screwdriver to bend straight the bended mounting tab and tip out the unit from the mounting bracket.
Specifications General Reference Supply Voltage.....................................................12V(DC) Operating Voltage Range..........................................10.5~15.8V(DC) Max Operating Current.................................................................10A Grounding System.......................................Car Battery Negative Pole Installation Dimension(W×H×D)...............178 mm×50mm×(165+25)mm Installation Angle....................................................................
Specifications Video Normal Video Input Level ( CVBS ) ...........................................1.0±0.2V Video Input Impedance................................................................ 75Ω Video Output Impedance..............................................................75Ω Video Output Level...............................................................1.0±0.2V (Under normal video input level) TFT Monitor Screen Diagonal....................................................................
Appendix Region Code According to DVD sale region, the whole world is divided into six regions. A DVD disc can be played back only when its region code is compatible with that of the player in use.
Appendix Please Recycle Your Spent Batteries Batteries should not be disposed of in unsorted municipal waste, but separately collected to facilitate the correct treatment and recycling of the substances they contain. The recycling of batteries ensures the recovery of these valuable materials and prevents any potentially harmful effects upon both the environment and human health.
P/N:12707500XXXX