User Manual
GB
10
Main Unit of Your DVD Player
Colour Output Connectors (Y, PB(CB) and PR(CR)):
Some TVs and monitors are equipped with input connectors for the component colour signals (Y, PB(CB) and PR(CR)). By
connecting these input connectors to the corresponding output connectors on the DVD player, you can enjoy higher
quality playback images.
If you are using a TV or monitor equipped with Y, PB(CB) and PR(CR) connectors, use these connectors rather than
the VIDEO OUT or S-VIDEO OUT connector.
VIDEO output mode changeover switch for LINE1 OUT
(21-pin Euro-SCART)
• VIDEO: Position for output of Video signal
• RGB: Position for output of Video signal by RGB signal
• S-VIDEO: Position for output of S-Video out signal
Change the position according to the types (VIDEO/RGB/
S-VIDEO) of input terminals of the equipment with which
the 21-pin Euro-SCART is to be connected.
S-VIDEO OUT
• S-VIDEO signal is always output regardless of the position
of the output mode changeover switch for LINE1 OUT
(21-pin Euro-SCART).
VIDEO OUT
• VIDEO signal is always output regardless of the
position of the output mode changeover switch for
LINE1 OUT (21-pin Euro-SCART).
Rear
LINE1 OUT (21-pin Euro-SCART)
(see page 14)
OPTICAL
DIGITAL OUT
FRONT
SURROUND
CENTER
LINE1 OUT
DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
SUB
WOOFER
Y
P
B
(
C
B
)
P
R
(
C
R
)
VIDEO
S-VIDEO
RGB
When the output changeover switch of LINE1 OUT (21-pin Euro-SCART) is set in “RGB” position, component colour
signals (Y, PB(CB), PR(CR)) are not output.
AUDIO OUT
(see pages 13 – 14)
OPTICAL
DIGITAL OUT
(see page 15)
DIGITAL OUT
(see page 15)