User Manual

GB
16
OPEN/
CLOSE
DIM M ER
DIGITAL
GAMM A
DIGITAL
S.PICTURE
VIRTUAL
OPERATE
DISPLAY
AUDI O
TITLE
MENU
SETUP
SUBTITLE
ON/OFF
SUBTITLE ANGLE
OPERATE
OPEN/
CLOSE
Startup Screen
1 Turn on the TV, and select the external channel to which the DVD player is
connected.
2 Turn on the DVD player by pressing the OPERATE button. When the startup
screen shown at right appears on the TV screen, the preparations are complete.
Turning the DVD player power to the
Standby mode or to the Active mode.
Standby mode and Active mode
This DVD player has these two working modes. Each
time you press the OPERATE button, the power turns
to the Active mode or to the Standby mode alternately.
These two modes work as shown in the right table.
Turning the power to the Active mode (ON).
Press the OPERATE button to turn on the DVD player.
At this time, the STANDBY LED indicator on the DVD player goes
out and the DVD player enters the Active mode.
• When pressing the îOPEN/CLOSE button in the Standby mode, the
DVD player is also turned on and it enters the Active mode.
Turning the power to the Standby mode
Press the OPERATE button to turn to the Standby mode while the DVD player is in the Active mode.
At this time, the STANDBY LED indicator on the DVD player lights and the DVD player enters the Standby
mode.
Auto power-off function
• If no button is pressed within 30 minutes after the playback of a disc stopped, the DVD player automati-
cally enters the Standby mode.
Turning on the TV and the DVD player
STANDBY
PHONES LEVEL
OPERATE
PHONES
MIN MAX
GAM M A S.PICTURE
STILL /PAU SE STOP
PLAYSKIPOPEN/CLOSE SKI P
STANDBY
LED indicator
OPEN/CLOSEOPERATE
Standby Front panel VIDEO
indicator Display Output signal
Standby
On Off Off
mode
Active
Off On On
mode