User Manual

ManualsBrandsSharp ManualsDVD PlayerDV-760H

OPEN/

DIM M ER

DIGITAL

GAMM A

DIGITAL

S.PICTURE

VIRTUAL

OPERATE

DISPLAY

AUDI O

TITLE

SKIP SKIP

SETUP

SUBTITLE

ON/OFF

SUBTITLE ANGLE

ENTER

REPEAT

A B REPEAT

PROGRAM

DIRECT

PAUSE

CLEAR

RESUME

MEMORY

RETURN

SLOWREV FWD

PLAY

STOP

STIL L

VOL

INPUT

OPERATE

TV CONTROL

DVD/TV REMOTE CONTROL

ENTER

Setup

SPEAKER Setting

1 Use the ' or " button in to move the screen cursor (

) to

SPEAKER.

T V MO D E S E T

SPEAKER

PRO LOG I C

LEVEL

SET UP

PARENTAL

OFF

2ch/DIGITAL

4:3

L B

PAL

2 Press the \ or | button in once to display a schematic

diagram of the current speaker setup.

SET UP

TV MODE SET

SPEAKER

2ch/DIGITAL

RETURN

4:3 L B

PAL

Select “2ch/DIGITAL”, “5ch” or “5.1ch” as the speaker system type.

• 2ch/DIGITAL — Select this option when you are connecting to

the audio input on a stereo TV or to audio equipment that uses

2 speakers.

• Digital Output:

Always use the “2ch/DIGITAL” setting if you are using the

OPTICAL DIGITAL OUT or DIGITAL OUT connectors.

• For a monaural TV, use the “2ch/DIGITAL” setting.

• If you are connecting to 2-channel audio equipment or a TV

(connected to AUDIO OUT “FRONT”), do not select “5ch” or

“5.1ch” as this could result in defective sound.

• 5ch — Select this option when you are connecting to audio

equipment that uses 5 speakers.

(2 front speakers, 1 centre speaker, 2 surround speakers)

• 5.1ch — Select this option when you are connecting to audio

equipment that uses 6 speakers.

(2 front speakers, 1 centre speaker, 2 surround speakers and

1 subwoofer)

• Analogue Output:

Always use the “5ch” or “5.1ch” setting if you are using the

AUDIO OUT “FRONT”, “SURROUND”, “CENTER” or

“SUBWOOFER” connectors.

3 Press the \ or | button in

to select the number of channels

(“2ch/DIGITAL” “5ch” or “5.1ch”).

• If your speaker system does not match the schematic OSD, you will not be able to play back the true original

sound. In this event, use the “2ch/DIGITAL” setting.

4 If you want to complete the settings here, press the ENTER button on the remote control to exit the setup

procedure. If you intend to specify the next setting, proceed to its step 1 using the ' or " button in

L C

SL SR