DVD Player Operation Manual Model Number: DV-AT4000

12
DV-AT4000
SHARP 9HX55769150
Preparation for Use
- System connections -
System connections
"
Digital connection to a surround amplifier,
etc.
Connect the unit to a DTS digital surround amplifier, etc. to enjoy DVD/CD sounds
through other equipment.
"
Digital connection to a digital audio
recorder, etc.
Caution:
Turn off all other equipment before making this connection.
Audio signal
Digital audio cable
(supplied)
Dolby Digital/DTS amplifier etc.
(Connecting to a TV,
refer to 13 -14 pages.)
To coaxial digital
audio input jack
TV
Selecting a sound signal type
When connecting other equipment to an optical
digital audio output, adjust the audio output set-
ting accordingly (see page 17).
Bitstream
When the unit is connected to a processor or
amplifier that supports Dolby Digital (5.1ch).
LPCM
When the unit is connected to the 2-channel
audio equipment or an MD recorder, the Dolby
Digital does not function.
Audio signal
Optical digital cable
(commercially available)
To the optical
digital audio input jack
Digital audio recorder, etc.
Control Panel
Audio
Digital Output
LPCM Output
BitStream
48 kHz
Setup Usage: Press ARROW keys to move, ENTER key
to change, MENU key to exit.