DVD Player Operation Manual Model Number: DV-AT4000

DV-AT4000

SHARP 9HX55769150

Preparation for Use

- System connections -

System connections (continued)

Connecting to a TV with component video

input jacks

If the connected TV supports progressive scanning, set the video mode selector

switch to PROGRESSIVE to enjoy high-density images. If not, switch back to INTER-

LACE.

Notes:

If your TV has different indications for the component video inputs (Y, CB and CR

or Y, B-Y and P-Y), connect jacks with its matching color.

Do not connect to a component video input jack designed for the high-vision sys-

tem, which is not DVD-compatible (the images may be distorted or not appear).

What is progressive scanning?

The conventional TV system displays 30 frames of still images per second to com-

plete sequential movement (interlaced scanning). Whereas, progressive scanning

displays one frame every 1/60th of a second (60 frames per second) to ensure less

flickers and high-density images.

Connecting the AC power cord

After checking all the connections, plug the AC power cord of this unit into the AC out-

let.

Note:

Unplug the AC power cord from the AC outlet if the unit will not be in use for a pro-

longed period of time.

To component

video input jacks

Component video cable

(commercially available)

Video signal

Audio signal

To audio

input jacks

Audio cable

(commercially available)

AC outlet

(AC 120 V, 60 Hz)