DVD Player Operation Manual Model Number: DV-AT4000

16
DV-AT4000
SHARP 9HX55769150
Preparation for Use
- Changing the initial setting of DVD -
Changing the initial setting of DVD
Turn on the TV, and switch the input to the "VIDEO 1" or "VIDEO 2" etc. accord-
ingly.
Settings are retained even if the unit is set to the stand-by mode.
Note:
You cannot display the setup screen while a disc is playing.
1
Press the POWER switch on the
main unit to turn the power on.
!
The startup screen appears.
!
The disc should be stopped at this time.
!
While the stand-by indicator is lit (in the
stand-by mode), the unit can be turned
on with the ON/STAND-BY button on
the remote control.
2
After pressing the button, press the MENU button.
3
Press the or button to select the
main menu and press the button.
4
Press the or button to select the
submenu and press the ENTER
button.
If you press the button during the opera-
tion, the previous display disappears.
5
Press the or button to change the setting and press the ENTER
button.
!
If you press the RETURN button during the operation, the previous display
disappears.
!
To change other settings, begin from step 3.
6
Press the MENU button.
The new setting is memorized.
DVD
Video CD
CD
Audio Visual
Entertainment
Language
System
Video
Audio
Control Panel
Language
OSD Language
Audio Language
Menu Language
Subtitle Langua
Setup Usage: Press ARR
to change, MENU key to e
Control Panel
Language
OSD Language
Audio Language
Menu Language
Subtitle Language
Preferred default Audio Language on playing DVD.
English
English
Chinese
Danish
German
Spanish