DVD Player Operation Manual Model Number: DV-AT4000

39
DV-AT4000
References
- Specifications -
"
Before transporting the unit
"
Condensation
Sudden temperature changes, storage or operation in an extremely humid environ-
ment may cause condensation inside the cabinet (laser pickup, etc.) or on the trans-
mitter on the remote control.
Condensation can cause the unit to malfunction. If this happens, leave the power on
with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any
condensation on the transmitter with a soft cloth before operating the unit.
"
If trouble occurs
When this product is subjected to strong external interference (mechanical shock,
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
Unplug the unit and, after for some time, plug it in again.
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
1 Set the POWER switch on the main unit to ON.
2 While in the stop mode, press the button.
The disc tray will open. Remove a disc. Then press the DISC SKIP button to rotate
the tray. and remove the remaining disc(s).
3 Press the button to close the disc tray.
Make sure that "NO DISC" is displayed.
4 Set the POWER switch on the main unit to OFF, and then unplug the AC
power cord from the AC outlet.
Power source
AC 120 V, 60 Hz
Power consumption
16 W
Dimensions
Width: 17-5/16" (430 mm)
Height: 2-15/16" (86 mm)
Depth: 11-1/8" (394 mm)
Weight
6.8 lbs. (5.4 kg)
Signal system
NTSC color
Supported disc types
DVD (Region number 1, ALL), SVCD, VCD, audio CD,
CD-R, CD-RW
Video signal
Horizontal resolution: 500 lines
S/N ratio: 70 dB
Audio signal Frequency character-
istics
Linear PCM DVD:
4 Hz to 22 kHz (sampling rate:
48 kHz)
4 Hz to 42 kHz (sampling rate:
96 kHz)
CD: 4 Hz to 20 kHz
S/N ratio
CD: 98 dB (1 kHz)
Dynamic range
Linear PCM DVD: 95 dB
CD: 95 dB
Total harmonic distor-
tion ratio
0.005 % maximum
Audio output termi-
nals
Coaxial digital output: RCA type 1
Optical digital output: Square type 1
Analog output: RCA type 1 pair (L/R)
Video output termi-
nals
Video output: RCA type 1
S-video output: S-terminal 1
Component video output: RCA type 3