Specifications

GB
22
Auto Installation
Preparation
• Turn on the power of TV and switch to the
AV input used to connect to the Recorder.
1 Press OPERATE for the first time
after purchase.
• The “INSTALLATION AUTO (AUTO
INSTALLATION)” screen is displayed.
2 Press SET/ENTER to continue
with the installation.
Turning the Power On
Press OPERATE on the remote
control or Recorder to turn on the
power of Recorder.
• When you turn on power, the HDD button
and DVD button on the front of Recorder
will blink. If either the HDD or DVD button is
blinking, system processing is in progress,
so wait until the button lights up.
• When the Recorder power is turned on for the
first time after purchase, the “AUTO
INSTALLATION” screen is displayed. Follow
the procedure shown on pages 22, 23.
To Turn the Power Off
Press OPERATE on the remote
control or Recorder to turn off power.
• The HDD or DVD button on the front of
Recorder will go out, and the STANDBY
indicator will light up.
• If you press OPERATE again immediately
after turning off, the Recorder may not turn
on. If this happens, wait a while and then
turn on power again.
About the Power Supply
• Do not unplug the power cord immedi-
ately after you plug it into the AC outlet
(less than about 15 seconds after
plugging in). In very rare cases, this
may cause the memory to revert to its
initial state, and all timer programmes
will be erased. If you pull out the power
plug while power is on, it will take a
while for the hard disc to get ready
when you turn on power the next time.
During this time you can only view live
broadcasts.
• If you turn on power in a low-tempe
rature environment, only live broadcast
viewing is possible until the hard disc
(HDD) reaches its operating tempera-
ture.
I N S TA L L A T I ON
POUR DEPART .
APPUYEZ TOUC
AUTO
SU I VEZ LES I NST
RUCT I ONS
HE ENTER
:RETURN:ENTER
ENGL I SH ESPA
LANGUE
DEUTSCH SVEN
FRANÇAIS NEDE
ITALIANO
:SÉ LECT .
ÑOL
SKA
RLANDS
:RETOUR:ENTRÉ E
• The “LANGUE (LANGUAGE)” screen
is displayed.
3 Select the On-Screen Display
language you want to display on
the screen using ' / " / \ / |,
then press SET/ENTER.
NOTE
• If changing the On-Screen Display
language, use AUTO INSTALLATION again.
See the information under “Important” on
page 23 for details on the AUTO
INSTALLATION procedure.
• The “COUNTRY” screen is displayed.
COUNTRY
A
B
DK
FIN
D
NL
F O
:SELECT
I
N
P
E
S
CH
THERS
:RETURN:ENTER
Using the AUTO
INSTALLATION
for initial setting
When the Recorder power is turned on for the
first time after purchase, the “AUTO
INSTALLATION” screen is displayed. You can
use the “AUTO INSTALLATION” function for
easy initial settings regarding On-Screen
Display language, TV channel, etc. From the
second time on, the “AUTO INSTALLATION”
screen will not appear.
DV-HR350F-020-023 04.3.1, 4:20 PM22
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals